Traktor Kontrol Z2 4 Deck Mapping by Michael Wenz!

Home :: Post and find Controller Mappings :: Traktor Kontrol Z2 4 Deck Mapping by Michael Wenz!Reply
Traktor Kontrol Z2 4 Deck Mapping by Michael Wenz!
Posted on: 24.06.2013 by Stacy Mcilvaine
The Post below is the old mapping, still cool but I believe this one is way better...


https://maps.djranking s.com/mappings/1763


************************************************** **************************














After many hours of reading and tweaking my Z2 I believe I have come up with a decent 4 deck mapping to use with the Z2! This is a work in progress and I am hoping that posting on here might spark up some improvements to my TSI and save someone the painful experience of figuring out what works and what doesn't.

I will be making a full graphic description after some more testing but for now this TSI is version 1.0

Basically I was looking for a way to map Decks C & D to the channel section while in a Modified or Shift state. I have created 2 Modifiers for the "Flux" buttons. The Flux button on the left is M1 and the one on the right is M2.I had to create 2 modifiers cause there was a conflict. When I used "Shift" as a Modifier it over rides the "Knob Snap" function as described on page 16 of the Z2 Manual. If you have a better work around please let me know!

This is just a modified Default map... I tried to keep all the factory functions the same as much as possible.

Here is a description of my alterations and how to use them.

Holding Flux L (M1) changes the following controls for decks C&D on the Z2 surface (A becomes C & B Becomes D)
-Volume fader
-Gain
-Eq
-Filter control
-Load
-Rel/intl mode
-Loop size & Select Knob
-Deck Flavor for Deck C
-Sync on/off

Holding Flux R (M2)
-Move L and R (changes position when you scroll using the Act/Move function knobs)
-Deck Flavor for Deck D

Michael Wenz Z2 1.0.tsi


Made some Changes to enable 4 deck DVS control...

Here is 1.1 version
Michael Wenz Z2 1.1.tsi


This may not be the final mapping but I do believe it is a good start! The way I have it setup you can easily change to remix decks or track decks and the mapping stays the same. I will eventually have this mapping in conjunction with using the K2 as a Remix deck controller/ Effects Unit 3&4 (I believe).... Please try it out and let me know if you have any input! I will make updates to this thread after I find some changes. Happy Mapping!


Please checkout some of my stuff as well!
http://www.beatport.com/artist/michael-wenz/80041
http://soundcloud.com/michael-wenz
Stacy Mcilvaine
24.06.2013
The Post below is the old mapping, still cool but I believe this one is way better...


https://maps.djranking s.com/mappings/1763


************************************************** **************************














After many hours of reading and tweaking my Z2 I believe I have come up with a decent 4 deck mapping to use with the Z2! This is a work in progress and I am hoping that posting on here might spark up some improvements to my TSI and save someone the painful experience of figuring out what works and what doesn't.

I will be making a full graphic description after some more testing but for now this TSI is version 1.0

Basically I was looking for a way to map Decks C & D to the channel section while in a Modified or Shift state. I have created 2 Modifiers for the "Flux" buttons. The Flux button on the left is M1 and the one on the right is M2.I had to create 2 modifiers cause there was a conflict. When I used "Shift" as a Modifier it over rides the "Knob Snap" function as described on page 16 of the Z2 Manual. If you have a better work around please let me know!

This is just a modified Default map... I tried to keep all the factory functions the same as much as possible.

Here is a description of my alterations and how to use them.

Holding Flux L (M1) changes the following controls for decks C&D on the Z2 surface (A becomes C & B Becomes D)
-Volume fader
-Gain
-Eq
-Filter control
-Load
-Rel/intl mode
-Loop size & Select Knob
-Deck Flavor for Deck C
-Sync on/off

Holding Flux R (M2)
-Move L and R (changes position when you scroll using the Act/Move function knobs)
-Deck Flavor for Deck D

Michael Wenz Z2 1.0.tsi


Made some Changes to enable 4 deck DVS control...

Here is 1.1 version
Michael Wenz Z2 1.1.tsi


This may not be the final mapping but I do believe it is a good start! The way I have it setup you can easily change to remix decks or track decks and the mapping stays the same. I will eventually have this mapping in conjunction with using the K2 as a Remix deck controller/ Effects Unit 3&4 (I believe).... Please try it out and let me know if you have any input! I will make updates to this thread after I find some changes. Happy Mapping!


Please checkout some of my stuff as well!
http://www.beatport.com/artist/michael-wenz/80041
http://soundcloud.com/michael-wenz
Stacy Mcilvaine
27.07.2013
Done! https://maps.djranking s.com/mappings/1763
Rufus Ondrick
25.07.2013
seems like a cool mapping it'd be great to see a video demonstration
Kory Carby
26.07.2013
whats going on with the mapping
Tamra Millus
25.07.2013
wihoo!! hurry up!
Stacy Mcilvaine
24.07.2013
My new improved mapping is way better. I am about 65% done. Stay tuned!
Stacy Mcilvaine
26.06.2013
I have updated my mapping to V 1.1

This fixes some buttons using actual decks. ( sorry I was mapping without them before)

Anybody try this? I am liking it!

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy