S4 - Fx tricks in midi mode (new user video)

Home :: NI - Native Instruments S4/S2 Controller talk :: S4 - Fx tricks in midi mode (new user video)Reply
S4 - Fx tricks in midi mode (new user video)
Posted on: 20.01.2011 by Kecia Wnukowski
I copy here the video's description:

Because of the fast communication protocol (generally used), many people tend to forget that the S4 is ALSO one of the best midi controllers out there. Facing the difficulties to be limited on how you can manage different FX parameters with the jogwheels or some buttons, I decided to have a go at a FX management midi mode to pull out quickly some tricks. The idea was to be able either to play with the buttons like pads ( a bit like a midi-fighter) or emulate with the jogwheel and faders - in this case the pitch fader - the juggle mode from the VCI100.

The video is only here to 'showcase' what is the endless potential that you could add to the existing S4's embedded mapping. You can see I switch to midi mode as the browse button will lit in blue (and I've created some led behaviours on the sample play buttons).

Only two tracks mixed basically here and me playing with the FX combinations I set up. As I said this is a test, I usually don't twist songs that much with effects so please be gentle with me .

The coloured faders were painted blue & white to match decks' colour code with some acrylic paint but comes originally from Djs face like the orange knobs used on all D/W knobs.


Playlist:
Kenny Larkin - You are (Planet E communications)
Hobo - Berlin booty (Minus)



http://www.youtube.com/watch?v=TF0VsLlq0Fc

Hope it will give you some ideas.
Kayhan Polat
25.01.2011
Originally Posted by Pollux#13
nice work. btw on behalf of djtt community would you mind sharing your tsi file for this?
^^
Alane Botkin
15.04.2011
Can you explane how use the default s4 mapping and midi mode?
Kecia Wnukowski
11.04.2011
Hello, actually the two threads are two different things, but for the midi mapping I used for this example, as I said, that was a test, I didn't work on it anymore after the start of the thread and used the file as a base for others mappings ideas that are just that..ideas that haven't been translated for something I could use myself.
If one day NI allows the loop length display to be mapped either in hid or midi mode and frees up a bit the fx units routing, I'll work on something as it will be then interesting to integrate all those ideas in a single mapping.

But I'm sure one can easily take inspiration from what was presented in the first place or even take advantage of the ideas featured in the latest midi fighter mapping and adapt it to the s4 in midi mode.
Byron Dipple
11.04.2011
It has already been shared

http://www.djranking s.com/community /showthread.php?t=26132
Anastacia Kijewski
10.04.2011
+1 on the sharing request. i'd love to try this one out. i'm currently using my X1 with the IG mapping and it's making me bonkers with the new possibilities. having my S4 working regularly plus on midi mode with another mapping would be perfect! would love to try some different ones so that i could at some point select the best options for my personal use!

Could you be so kind as to share this mapping with all of us ? cheers
Katherin Voigts
08.04.2011
How is this working with TP2? Sounds absolutely incredible! Definitely need more people like you dishing out the information. Hats off
Dewayne Liddicoat
07.04.2011
Very cool!

Thanks OP for sharing all this info.
Francina Decosse
04.03.2011
shift+browse will switch the controller to midi mode. The custom mapping demonstrated in the video is made in Midi mode.

There is also a limited possibile to redefine some of the built-in mappings w/o switching to Midi Mode. Read through the Traktor Bible site for insight: http://www.traktorbible.com/en/kontr...rmappings.aspx
Oswaldo Adin
04.03.2011
ive never mapped crap in my life but im going to try,,so this is a complete noob question.. how do you map the button that turns the s4 from default setting to your whole other custom settings? like makes it so you can do all that cool stuff just by pressing browse? /
Francina Decosse
02.03.2011
bump!

the OP is so great that the whole thread needs to be around the first few pages of the sub-community
Emilia Colchado
27.01.2011
please share
Kayhan Polat
25.01.2011
Originally Posted by Pollux#13
nice work. btw on behalf of djtt community would you mind sharing your tsi file for this?
^^
Murray Hoffa
25.01.2011
Well not so much by myself, i trawled through various DJTT articles and found what i was looking for and applied what i learnt...But yea, I got a PM today if I would share my mapping, its no where near finished(yet) but i'll gladly help out anyone who wants to try and D.I.Y. it via PM or this community ...So I probably wont be uploading the .tsi either, however you never know! :P

Thanks again Yul, you're the one qho ispired me to carry this out and I'm about 200 times more knowledgeable on mapping as a whole now!

Sound!
Kecia Wnukowski
25.01.2011
Good man! That's the spirit!

It's good you found the solution by yourself and you probably learned more this way. Congrats.
Murray Hoffa
24.01.2011
Ok so i sorted every thing i needed to know about the LEDs and the mapping...

Cheers Paulo,

No problem glad to help,

See what you can do if you just read a little and experiment?

Yes sir!



I'm not slightly schizophrenic

<.<
Murray Hoffa
24.01.2011
Actually any chance you could go a bit more in depth with the LED mappings?

When i got to Add Out>Output>Beatphase Moniter and input your values, where do i go from there?
Murray Hoffa
24.01.2011
Sorry, got that sorted! :P
Murray Hoffa
23.01.2011
Thanks very much Yul, that has been a great help...Just one more query while i'm here. If I set up Effect Parameters of Beatslicer on say "Hotcue 1-4" i.e. HC1 - 0, HC2 - .25, HC3 - .75, HC4 - 1 and then I create a modifier to use those same buttons for another set of effects parameters, i.e. Shift 2 + HC1 = Gater .5, Shift 2 + HC2 = Gater .75 and so on, why does the Beatslicer parameters also change? And how can I stop it doing so?

I dont believe that makes too much sense so I'll try again...

What I want:

No Shift + Hotcue 1-4 = Beatslicer effects parameter 3 increments (Fx unit 1)
Shift + Hotcue 1-4 = Gater parameter increments (Fx unit 2)

What I have:

No Shift + Hotcue 1-4 = Beatslicer effects parameter 3 increments (Fx unit 1)
Shift + Hotcue 1-4 = Beatslicer effects parameter 3 increments (Fx unit 1) PLUS Gater increments (Fx unit 2)

Thanks again, you're a great help!
Nedra Fresneda
22.01.2011
Browse button doesn't stay lit to indicate MIDI mode, it just does because you pressed it when entering it (and hasn't been mapped yet), you can click it and it will turn on/off.

the indicator is having the loop displays showing "ON" or "00"
Charline Dye
22.01.2011
Thanks for the info. I haven't dug around in the controller editor yet, but that will get me started.
Kecia Wnukowski
22.01.2011
Did you set up your buttons within the controller editor (not the "manager" inside your preferences). There you can change all midi messages from the S4. I had to do this as all buttons within were configured as control change messages.

Open TS4 and open the controller editor
Press the chosen button, it will lit on the controller editor: for each button on the right you have three tabs: templates, pages, assign
Within the assign tab, change type to 'note' (instead of control change) and below set your button as 'gater'. Your button should now be set up correctly.
Do the same for the buttons you intend to use.
You may want to save your template once done.

Go back to your mapping (remember in this case, you're adding a generic midi device, not a user S4 mapping).
Depending on how your work with FX ('restore parameters when switching FX' options), you may need to call an FX preset first so everything's ready when you want to act on your buttons.

- Create a shift (hold) modifier set as hold for a value of 1

As an example I'll take here a beatslicer in advanced mode and we'll consider that's the only FX you're going to set up:
In your drop down menu ("add in") where you choose the functions you're going to map:
- go to global> Fx panel mode> learn your button, assign to the correct FX unit, set to direct to advanced mode (single). add the modifier condition=1
- "add in" all the parameters from the drop down menu from ' Fx single' so that should be: Fx select (beatslicer), Fx on (set to 0), effect button 1, effect button 2, D/W single (set to 0), effect param 1, effect param 2, effect param 3... at least (you may choose to add a LFO reset but that's your call and don't bother with the 'reset'). Learn all those to your button. All those shall be assigned correctly to the Fx unit you chose. All those shall have the modifier condition=1 added.

So you set up a modifier that when pressed and when you press (usually you have to press twice) your chosen button to call your beatslicer it should transform the fx unit to single mode, call your beatslicer, make sure the fx is set to 0, make sure all parameters are at a 'safety' level (hence the D/W to 0).


Now you can create the direct action for your button by creating all the needed functions as you may see fit (and don't forget to add your modifier =0).
Personally speaking, even if that's a bit of work, I tend to recreate all the fx functions so I never have any surprises (ie all settings from the change of the fx unit to single mode, to all parameters and buttons). I usually for instant action set the 'effect on' function to an 'hold' type.

Create accordingly for the other buttons, following the same method.

Don't forget also to have a way of assigning the Fx unit(s) to your decks on this midi mapping, that could be handy to not to have to switch to get back to the controls.


Hope that helps (a bit).


ps:
- when switching to midi mode, I believe the browse button's led should be and stay blue but I may be mistaken.
- the led display cant' really be set up in midi mode, usually it says 00 on both display, sometimes it keeps some other led lit inside. Don't really bother. Just know it doesn't work in midi mode.
Murray Hoffa
22.01.2011
I cant get my head around any of this, I'm able to map the effects and their parameters to the hot cue buttons, but I can only select it as a direct so when i hit the button to go from say 0 to 1 and then hit the 0 to .25 i have to hit the 0 to 1 twice to make the parameter change...Dont know if that makes any sense! :/ Also when i go into Midi Mode, the browse button doesnt stay lit, the loop length screen says "on" dont know if thats supposed to happen either! :/
Janyce Henningson
21.01.2011
Originally Posted by Yul
I just used the jog and (pitch ) fader to control FXs so no I didn't have to believe about it and didn't feel any sensible difference. It may be the case when using the jogwheel for its native purposes (but then I would switch back to the embedded mapping if I need so)
As for faders I just don't know, I didn't checked or paid attention.

Because I set up the pitch faders as modifiers however I can tell the modifier states are more properly read by the software (unlike on some other units where if you move the fader too quickly the software miss some states which makes juggle mode a bit unreliable).
Excellent, believe I'll map a midi version myself then - thanks
Kecia Wnukowski
21.01.2011
Great video Yul might be a stupid question but what fx do you have mapped to the tempo faders and is it a freeze or something like that that switches on at the bottom of the faders travel?
(thanks) No it's not stupid, it depends on the preset called, you may have heard either a beatmasher, a lofi, a TTFX and a reverb all together or it may have been a beatmasher, transpose stretch, reverb and delay (I believe) if that's what you've heard. The 'transpose stretch' progressively changed to a low setting with the addition of the reverb and delay makes a kind of freeze but it isn't one.
I believe that's what you refer to?
Kecia Wnukowski
21.01.2011
In midi mode how are the jogs / faders compared to normal - can you tell the difference even?
I just used the jog and (pitch ) fader to control FXs so no I didn't have to believe about it and didn't feel any sensible difference. It may be the case when using the jogwheel for its native purposes (but then I would switch back to the embedded mapping if I need so)
As for faders I just don't know, I didn't checked or paid attention.

Because I set up the pitch faders as modifiers however I can tell the modifier states are more properly read by the software (unlike on some other units where if you move the fader too quickly the software miss some states which makes juggle mode a bit unreliable).
Viola Bunner
21.01.2011
Great video Yul might be a stupid question but what fx do you have mapped to the tempo faders and is it a freeze or something like that that switches on at the bottom of the faders travel?
Christa Viscardi
21.01.2011
Originally Posted by Yul
Exactly what I've done for the last week, my girlfriend now officially hates me.
Do not worry about it, now we love you, very much


Great video!
sure, in NI don't know about this trick

P.S. but perhaps they know, but they do not want that would we opened all the possibilities at once
Kecia Wnukowski
21.01.2011
Exactly what I've done for the last week, my girlfriend now officially hates me.
Miquel Catan
22.01.2011
Making me feel like I need to sleep with my s4 so I can become that creative and useful with it.
Janyce Henningson
21.01.2011
Excellent work Yul, very inspiring.

I'm just working on a mapping for my X1 that controls decks 3 & 4, then in Shift mode is a sample and effects control.

Plus I've got a midifighter coming Monday which I'm going to map for FX.

Your thread has given me lots of ideas

In midi mode how are the jogs / faders compared to normal - can you tell the difference even?
Gigi Weese
21.01.2011
Originally Posted by photojojo
Thanks for the details. I'm about halfway through my MF mapping and am a little lost on what FX combos would be best because I don't really use a whole lot of FX normally. So finding good combos and their most optimal settings has been a bit of a struggle. These ideas will definitely help.
I am doing the same thing as well so that's why I am looking for combo's and sweeps to setup on the X1

+1 on the combo Yul, thanks for sharing.
Francina Decosse
21.01.2011
Originally Posted by Yul
Me. Want. A custom built midi fighter. Sexy sexy.
I have started to collect the parts to build a Nano Fighter. I'll use a Korg NanoKontrol for a brain. It'll have 24 buttons and 18 knobs/faders. What I can't implement on the Nano base is the LEDs . The NanoKontrol firmware & software does not expose the LEDs for MIDI control.
Kecia Wnukowski
21.01.2011
Forgot: some of the buttons I've mapped, set the parameters how I want it/them to be and I may add a 'increase' or 'decrease' setting for the amount that repeats itself so you can even emulate the movement of a fader in a sense or the other.
Kecia Wnukowski
21.01.2011
Me. Want. A custom built midi fighter. Sexy sexy.
Leeanna Ayla
21.01.2011
Originally Posted by knaumov
The Reloop Contour would probably have what you need and has an OK price (~210EUR).



It's a damn good companion for the S4, IMO. If only the colour scheme was a better match
Those faders are to short imo for using with FX. I believe a modded midi fighter is still the best choice.

<believeing out loud> I wonder if you could use one of the encoders on a modded MF and make a larger jog wheel type "knob" for it? </believeing out loud>
Francina Decosse
21.01.2011
Although announced months ago, it's on sale for just few weeks. There are not many people to give actual feedback.

a review of the interface edition is available at: http://www.digitaldjtips.com/2010/12...dj-controller/
There's also a controller edition w/o the built-in audio interface. The controller only retails for about 200EUR
Kecia Wnukowski
21.01.2011
Yes that's what I had in mind and checked. A X1 would be nice but that would remove away the juggle mode idea because of the lack of fader(s) and jogwheel. Need more info on the product.
Francina Decosse
21.01.2011
Originally Posted by Yul
I'm believeing about something with a jogwheel, some faders and buttons and turn that into an FX machine.
The Reloop Contour would probably have what you need and has an OK price (~210EUR).



It's a damn good companion for the S4, IMO. If only the colour scheme was a better match
Kecia Wnukowski
21.01.2011
I "believe" Beatmasher(s), slicer and gater are mandatory with whatever you put them with or even together. As I priority I would always include with that a delay and or its freeze, a lfo of some kind and a reverb of some kind, as those would work most of time well with any other effect or Fx combos.
I use very often the beatmasher+f92lof+reverse grain amongst all others. I also use a lot of 'crush' of some kind so either beatmasher + lofi + reverb in an order or another (it depends) or I may replace the lofi by some mulholland or the like to get something a bit different from the common combinations.

I also like the t3 delay with different depths or values to be played with buttons (kinda like on the djm2000), you can be more "rhythmic" with it.

You may have thought already about it, but in case, for your midi fighter you may want if you have 8 buttons available, to separate your chained FX: your first 4 buttons will only engage a beatmasher alone, the next tree the beatmasher AND the LFO together and the last the beatmasher AND the lfo AND the reverse grain. It gives you more combinations.
As you already have the s4 and that your midi fighter is an add-on, you can probably create at least 8 different presets and more so you'll have plenty of choice anyway.
If you work with "blocks" of 2 fx units you can get even more creative in your settings.
Leeanna Ayla
21.01.2011
Thanks for the details. I'm about halfway through my MF mapping and am a little lost on what FX combos would be best because I don't really use a whole lot of FX normally. So finding good combos and their most optimal settings has been a bit of a struggle. These ideas will definitely help.

<< Back to NI - Native Instruments S4/S2 Controller talkReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy