Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

fade to gray effect

Home :: NI - Native Instruments S4/S2 Controller talk :: fade to gray effectReply

fade to gray effect Posted on: 28.06.2011 by Deeann Surginer I would give my left nut to be able to use ableton's fade to gray effect in traktor. Is there a way of emmulating that with tracktor's existing effects? The effect is fantastic. Thanks!
Lang Abriel 16.07.2011	Originally Posted by photojojo that sounds like a good knob combo LOL sounds like a porno punchline.
Doug Bieling 05.07.2011	Originally Posted by photojojo I did and it seems the dry wet for bank one didn't make it into the mapping for whatever reason. After I added that and mapped it to the bottom left knob on my X1 and it worked great. ahh i believe i left that as it always seemed to be in teh right position on mine when it loaded the effect in. @faraguti - how you getting on?
Leeanna Ayla 02.07.2011	Originally Posted by faraguti thank you photo!! ill read both and try to install the fade do grey tsi.. i really loved playing with ableton because of this fx.. I believe your best bet is to install the loop recorder super knob tsi and edit it to include the f2g effect. read through this whole thread as there's a lot to learn and several different versions of the tsi. This one should import correctly, but you'll use the big import button on the bottom of preferences to get it in instead of the add button. http://djranking s.com/community /showthr...uper+knob+loop
Keli Vandenbergh 01.10.2011	Very interesting topic... I as a "leaving user of dvs, live and also computers for djing and going to the hardware side again" made a little research about hardware emulation of Fade2grey effect and I want to share one found with all of you. It is only useful for those who have FX send mixer but here it is: [ame="http://vimeo.com/19026422"]http://vimeo.com/19026422[/ame]
Lang Abriel 16.07.2011	Originally Posted by photojojo that sounds like a good knob combo LOL sounds like a porno punchline.
Antonetta Wikel 15.07.2011	Just to give some info, I was reading on the NI site today about how multiple tsi's extend the load time of Traktor upon opening. I love the idea about adding smaller tsi's for super knobs and such but just be aware that if it's taking a LONG time for Traktor to do it's thing on launch, it may be due to multiple tsi's. I haven't tested this, just passing on what I've read. Please don't shoot the messenger and keep on tweaking.
Deeann Surginer 15.07.2011	Thanks for all the awesome help, you guys rock! I seriously appreciate it!!!
Doug Bieling 06.07.2011	try it with that... plug it in and map it to a knob on that controller even if just to proove to you that its down to this native mode on the s4
Renata Brodzeller 06.07.2011	i have and apc40 that i used perfectly the fade to grey in ableton... Ableton is so much easier!
Doug Bieling 06.07.2011	do you not have any other controllers other than the s4 to try with?
Francina Decosse 06.07.2011	I'll try to find some time to implement this in a Super LR Knob mapping. Hope to have it done later this week. Cheers!
Renata Brodzeller 06.07.2011	nothing... still trying hard
Doug Bieling 05.07.2011	Originally Posted by photojojo I did and it seems the dry wet for bank one didn't make it into the mapping for whatever reason. After I added that and mapped it to the bottom left knob on my X1 and it worked great. ahh i believe i left that as it always seemed to be in teh right position on mine when it loaded the effect in. @faraguti - how you getting on?
Leeanna Ayla 02.07.2011	Originally Posted by faraguti thank you photo!! ill read both and try to install the fade do grey tsi.. i really loved playing with ableton because of this fx.. I believe your best bet is to install the loop recorder super knob tsi and edit it to include the f2g effect. read through this whole thread as there's a lot to learn and several different versions of the tsi. This one should import correctly, but you'll use the big import button on the bottom of preferences to get it in instead of the add button. http://djranking s.com/community /showthr...uper+knob+loop
Renata Brodzeller 02.07.2011	thank you photo!! ill read both and try to install the fade do grey tsi.. i really loved playing with ableton because of this fx..
Leeanna Ayla 02.07.2011	Originally Posted by faraguti i really need to get some tutorials to read.. im really lost! i entered midi mode, and mapped the top fx knob, but only works on midi mode.. and not as should work.. man.... that's as it should work. It will only work in midi mode unless you map it in NHL mode, but then you'll need to override the native command first. Here's a couple of good explanations on the S4 mapping situation http://traktorbible.com/en/kontrol_s4_usermappings.aspx http://traktorbible.com/en/kontrol_s..._encoders.aspx
Renata Brodzeller 02.07.2011	i really need to get some tutorials to read.. im really lost! i entered midi mode, and mapped the top fx knob, but only works on midi mode.. and not as should work.. man....
Leeanna Ayla 02.07.2011	Originally Posted by faraguti i added a new kontrol s4 - user, and im mapping like your tsi... edit: this is very hard for me... believeing about quit Don't give up To use this with your S4 you'll have to put it in midi mode by pressing shift + the browse button. in midi mode you can map it to any knob you want. You can map it in NHL made but you'll have to override native command for the knob you want to use for this super knob. Take a look at the loop recorder super knob thread on here for hints on how to do that. If you're a total noob to mapping it will either be good practice or a headache. If it's a headache just do it in midi mode. Originally Posted by MisterMoleyMole Anyone managed to try it? I did and it seems the dry wet for bank one didn't make it into the mapping for whatever reason. After I added that and mapped it to the bottom left knob on my X1 and it worked great.
Renata Brodzeller 02.07.2011	http://www.youtube.com/watch?v=WmspKzUarls
Renata Brodzeller 02.07.2011	im upoloading the video at HD quality on youtube..
Doug Bieling 02.07.2011	What knob are you trying to use ... send me a screeb shot again with your ports sorted now
Renata Brodzeller 01.07.2011	i added a new kontrol s4 - user, and im mapping like your tsi... edit: this is very hard for me... believeing about quit
Doug Bieling 01.07.2011	Hmmm I have no idea ... could it be something to do with rhia native mode on the s4 that i keep hearing about?
Renata Brodzeller 01.07.2011	i insert the in port and the out port, traktor kontrol s4, but when i hit learn and twist any knob, nothing happens
Doug Bieling 01.07.2011	Originally Posted by photojojo If you've got the same thing mapped to two different things in two different tsi's then there's a problem. So if you want to load a tsi that you use with one knob then you'll have to make sure there's no conflicting messages in your current tsi's. Is there some form of maximum number of tsis you can use in one session?
Doug Bieling 01.07.2011	Ahh you will have to change the ports to the ports of your controller i believe.
Renata Brodzeller 01.07.2011	when i hit learn, nothing happens... i tried importing with the lower button and inside the controller manager.. Really sad =[
Renata Brodzeller 01.07.2011	let me try now, hang on
Doug Bieling 01.07.2011	You need a spare knob to map all the commands to.... go to the first one click learn and turn the knob, go through every command in the Tsi learning to the same knob.... once done unclick learn and close settings play a track and turn that knob slowly :-D :-)
Tina Sereal 01.07.2011	Now, I've never heard this effect, but I just want an understanding of it: Essentially it's just a Filter 92 + Delay? In another thread we've been working on creating multiple effects for a super knob, so this may be extremely useful.
Renata Brodzeller 01.07.2011	Im trying here... I must go to controller manager, import and import the tsi... And now? Im a noob =[
Doug Bieling 30.06.2011	Anyone managed to try it?
Doug Bieling 30.06.2011	ok this is my work so far ... just learn one knob of your choice to all commands in this mapping. Let me know if you have any issues and once ive got to hera the proper fade to grey again i will see if this can be tweaked. this mapping with the turn of a knob should .... changed fx bank 1 & 2 to advanced mode banks if not already load filter92 into bank 1 and delay into bank 3 assign fx bank 1 & 3 to deck a increase the HP filter whilst decreasing the low pass filter whislt also upping the dry wet on the 3/16 delay Its rough but you should be able to see wat ive done with the mapping and tweak as you like. If you want me to try and do anything else just let me know. Gav
Leeanna Ayla 30.06.2011	If you've got the same thing mapped to two different things in two different tsi's then there's a problem. So if you want to load a tsi that you use with one knob then you'll have to make sure there's no conflicting messages in your current tsi's.
Doug Bieling 30.06.2011	Ahhhhhhhh i like your style Does this ever get problematic? i'll upload my tsi in a bit when i get home
Leeanna Ayla 30.06.2011	Originally Posted by MisterMoleyMole We cant merge TSI's though can we so whats the point of me sharing a tsi? or am i missing something, a trick that would prob make things easier when it comes to mapping? No, but you can load multiple tsi's.
Doug Bieling 30.06.2011	We cant merge TSI's though can we so whats the point of me sharing a tsi? or am i missing something, a trick that would prob make things easier when it comes to mapping?
Leeanna Ayla 30.06.2011	Originally Posted by djdexx Please forgive my "noob"ness... but I'm coming from serato, and the whole midi-mapping thing is relatively new to me. I got about 70% of what you are saying. But is there anyway at all you could shoot me a tsi of what that would look like. I really do appreciate the help. It's nice to be the new guy on a board, and still be helped. So, Thank You!!! Dexx This is the best video in the world for learning how to map a super knob http://djranking s.com/community /showthread.php?t=10700
Deeann Surginer 30.06.2011	Originally Posted by mostapha Map a superknob. You want a high-pass filter, a low-pass filter, and a delay set to 3/16, IIRC. As you turnt he knob, HP cutoff goes up, LP cutoff goes down, both resonances go up, delay goes wet. That's all there is to it, though it takes 3 FX units in Traktor to do it. Please forgive my "noob"ness... but I'm coming from serato, and the whole midi-mapping thing is relatively new to me. I got about 70% of what you are saying. But is there anyway at all you could shoot me a tsi of what that would look like. I really do appreciate the help. It's nice to be the new guy on a board, and still be helped. So, Thank You!!! Dexx
Renata Brodzeller 29.06.2011	Share here Mister!!! Now i've got reallllllyyy anxious!

<< Back to NI - Native Instruments S4/S2 Controller talk Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Denmark is:

fade to gray effect