Can I Haz S4 Ean Golden Mapping Plz?

Home :: NI - Native Instruments S4/S2 Controller talk :: Can I Haz S4 Ean Golden Mapping Plz?Reply
Can I Haz S4 Ean Golden Mapping Plz?
Posted on: 01.12.2011 by Kayhan Polat
:d:d:d
Marsha Elerson
02.01.2012
Originally Posted by mokha1
I'm having this problem too, any updates?
I am having the same problem with the jogwheels, the loobsection isnt working at all, not to forget the filternobs.

You can see the filters are turning inside Traktor, but they arent affecting the sounds at all.. Hope they get this working when they get home from vacation

Besides that, the effects is awesome!!
Leonor Critchfield
02.01.2012
I'm having this problem too, any updates?

Originally Posted by letstango
I got the TSI file, but I can't seem to get it working correctly .

I've loaded it twice, and pressing the shift + offset turns on the effects mode. Pressing the jog wheel turns the effect on, but moving the jog wheel does nothing.

Also I can't seem to see the beat jump number above the loop knob anymore .

Anybody have an idea what to do?
Stanley Peckman
29.12.2011
Originally Posted by anteater32
A fair assessment. I love the jog wheel mapping, its a cool feature, I'm not keen on the sample deck mapping and would rather make them back into sample decks which is more useful for me + I'm going to use a midifighter for cues 5-8 anyway.

The pitch faders have lost accuracy to the point I want to go back to NI mapping for the moment, I've also just upgraded to T2 2.12 after putting the DJTT mapping in - doh!

I noticed the DJTT mapping also loses the numerical display for loop length which is a pain.

So, can I remap the sample decks whilst keeping the jog wheel mapping? (sorry for the basic question, I'm only just learning about tsi's etc)
you can sample via recording button, its just the drag & drop that doesnt work anymore and I'm using the mouse for one shots just now.
Stanley Peckman
29.12.2011
Originally Posted by Rukks
I found many bugs with the new mapping last evening , haven't had the time to document them all properly but the pitch faders are wack now or else there is some specific order you have to go through for enabling/disabling the two types of effects....

Not having hid really hurts the results of the pitch faders and its pretty much an obligatory sync when using this mapping but still fun....

I can't seem to imitate ean's work with his acapellas in the orginal s2 video but ill keep working or see what was different about his mapping in that video.
A fair assessment. I love the jog wheel mapping, its a cool feature, I'm not keen on the sample deck mapping and would rather make them back into sample decks which is more useful for me + I'm going to use a midifighter for cues 5-8 anyway.

The pitch faders have lost accuracy to the point I want to go back to NI mapping for the moment, I've also just upgraded to T2 2.12 after putting the DJTT mapping in - doh!

I noticed the DJTT mapping also loses the numerical display for loop length which is a pain.

So, can I remap the sample decks whilst keeping the jog wheel mapping? (sorry for the basic question, I'm only just learning about tsi's etc)
Lilla Tankesley
02.01.2012
Just turn on the lil filter button within traktor with the mouse. They said it's a known bug and hopefully will be addressed
Marsha Elerson
02.01.2012
Originally Posted by mokha1
I'm having this problem too, any updates?
I am having the same problem with the jogwheels, the loobsection isnt working at all, not to forget the filternobs.

You can see the filters are turning inside Traktor, but they arent affecting the sounds at all.. Hope they get this working when they get home from vacation

Besides that, the effects is awesome!!
Leonor Critchfield
02.01.2012
I'm having this problem too, any updates?

Originally Posted by letstango
I got the TSI file, but I can't seem to get it working correctly .

I've loaded it twice, and pressing the shift + offset turns on the effects mode. Pressing the jog wheel turns the effect on, but moving the jog wheel does nothing.

Also I can't seem to see the beat jump number above the loop knob anymore .

Anybody have an idea what to do?
Stanley Peckman
29.12.2011
Originally Posted by anteater32
A fair assessment. I love the jog wheel mapping, its a cool feature, I'm not keen on the sample deck mapping and would rather make them back into sample decks which is more useful for me + I'm going to use a midifighter for cues 5-8 anyway.

The pitch faders have lost accuracy to the point I want to go back to NI mapping for the moment, I've also just upgraded to T2 2.12 after putting the DJTT mapping in - doh!

I noticed the DJTT mapping also loses the numerical display for loop length which is a pain.

So, can I remap the sample decks whilst keeping the jog wheel mapping? (sorry for the basic question, I'm only just learning about tsi's etc)
you can sample via recording button, its just the drag & drop that doesnt work anymore and I'm using the mouse for one shots just now.
Stanley Peckman
29.12.2011
Originally Posted by Rukks
I found many bugs with the new mapping last evening , haven't had the time to document them all properly but the pitch faders are wack now or else there is some specific order you have to go through for enabling/disabling the two types of effects....

Not having hid really hurts the results of the pitch faders and its pretty much an obligatory sync when using this mapping but still fun....

I can't seem to imitate ean's work with his acapellas in the orginal s2 video but ill keep working or see what was different about his mapping in that video.
A fair assessment. I love the jog wheel mapping, its a cool feature, I'm not keen on the sample deck mapping and would rather make them back into sample decks which is more useful for me + I'm going to use a midifighter for cues 5-8 anyway.

The pitch faders have lost accuracy to the point I want to go back to NI mapping for the moment, I've also just upgraded to T2 2.12 after putting the DJTT mapping in - doh!

I noticed the DJTT mapping also loses the numerical display for loop length which is a pain.

So, can I remap the sample decks whilst keeping the jog wheel mapping? (sorry for the basic question, I'm only just learning about tsi's etc)
Rey Holubar
25.12.2011
Yeah, Ean's mapping in the S2 video were specially made for that video. The effects in the new mapping are sort of more generic.

And yes, without sync, using effects in the jogs is much more difficult. There is no shame in using SYNC, because it opens up a whole new world of creativity.

I don't want to steal Ean's show. He and his team have put in many, many hours into the S2 and S4 mapping and giving them for free, is, well, totally monumental. However, I have also been putting in some hours in my S4 jog effects mapping. Actually Ean's S2 video inspired me to do it. It is a slightly different approach to jog FX in that I am using the built in "Jog to FX" setting in Traktor and have added a supplementary mapping to the default mapping, which means you don't loose things like the loop indicator and some of the other issues you get making your own custom user mapping from scratch. I am also looking for people to test it. So, if anyone is interested, I'd really appreciate it.

http://www.djranking s.com/community /showthread.php?t=43115

BTW, the first effect mode in my mapping is sort of an "offspring" of the left jog in Ean's S2 Video. I sure hope Ean doesn't mind.

I actually wish NI would improve their Controller Manager and mapping capabilities and what you can do with them. I really believe this is a strength in Traktor, which could be totally built upon. I am sure Ean is also telling them that too. At least I hope so.

scamo
Lang Abriel
24.12.2011
I found many bugs with the new mapping last evening , haven't had the time to document them all properly but the pitch faders are wack now or else there is some specific order you have to go through for enabling/disabling the two types of effects....

Not having hid really hurts the results of the pitch faders and its pretty much an obligatory sync when using this mapping but still fun....

I can't seem to imitate ean's work with his acapellas in the orginal s2 video but ill keep working or see what was different about his mapping in that video.
Roselee Jasnoch
24.12.2011
Just checking has everyone made sure they're running the most recent version of traktor?
Christy Orlow
23.12.2011
I got the TSI file, but I can't seem to get it working correctly .

I've loaded it twice, and pressing the shift + offset turns on the effects mode. Pressing the jog wheel turns the effect on, but moving the jog wheel does nothing.

Also I can't seem to see the beat jump number above the loop knob anymore .

Anybody have an idea what to do?
Wiley Pollastrini
23.12.2011
i found a "bug" if you will on this new s4 mapping

i posted it on there youtube video in the comments section but ill post t here also...

love this mapping. only problem i found is my on air starts flashing & my loop LED doesn't light anymore showing what bar loop I'm in. ean any idea for a fix for this?

i just realized that the loop LED will just stick whatever is on the display. i imported the file before booting up traktor thats why it was blank, but i removed the tsi played with the default mapping, put one loop to 8 and the other to a 16 then imported the djtt tsi and the numbers stuck. when u spin the loop knob it won't change on the LED it will work via the software and on screen though

not sure if this is a bug but i figured it was something to point out, and also like i said the "on air" light flashes instead of being on constant.
Roselee Jasnoch
23.12.2011
I just got a tsi no zip file! Can't test it to see if it works though as I'm not at home. Anyone else having any luck?
Also I guess this means I should upgrade traktor to the latest version to make sure it works the best right?
Sherrell Wolan
23.12.2011
When I download the zip file all I get is a vcf file theres no tsi or anything. What am I doing wrong?
Roselee Jasnoch
23.12.2011
Mapping is here! Just downloaded but have to wait a week until I'm back with my s4.
Roseanne Torstenson
22.12.2011
i was really hoping to have this mapping way before now... looks like it wont be used during my nye set
Kimbra Emden
22.12.2011
So if the store is closed and all orders are deferred until January 3rd... =(
Josefina Schutten
22.12.2011
ahahah lol
Kandi Odom
22.12.2011
Fiiiiiinaly out!!!!!!!!!!!!!!!!!! nahh just kidding
Klara Neiffer
22.12.2011
Hi all !
A release date should be cool ^^

I hope this mapping will come with no hiden content ^^
Sherri Klepzig
22.12.2011
Im the map im the map im the map.

Not too long of a wait considering the issues tp2 is/has been going through since the s4 was born.
Not that I dont want the map now, he he just so I can change it.
Hopefully it will be better than my current settings, but then what was all my hard work for?

Kandra Fagler
22.12.2011
Thanks gonna give it a try and see what happens
Lang Abriel
21.12.2011
could try this solution...http://www.djranking s.com/community /showthread.php?t=42972

Its funny cuz i looked at that thread immediately after i replied to your post....could be that djtt overlooked that possible "hack"
Kandra Fagler
21.12.2011
Originally Posted by Rukks
Yeah they lost the HID response, doesn't seem like it would be as important if you are using the mapping, I mean i never really scratch on my s4.

Would have been nice if they just implemented it like the armyofme mapping for the s2 where she just uses midi shift and gets all the joys of HID, u could possibly set that up though...I haven't done a midi mapping on top of the stock mapping.
Eh if I knew this I wouldn't have paid 5 bucks for it

I mean even without scratching I rely on the jogwheels + pitch slider to mix as I do manual beat matching , it seems like theres also a glitch with the pitch sliders, I always set it to absolute mode to mirror the physical hardware position but in the djtt mapping the pitch sliders are kinda glitchy and overrides the absolute thing in the menu

Anyone else get that glitchy pitch slider? Everything works perfect again once I deleted the djtt mapping, for now I will revert to the default mapping until there's a new revision or something
Dj Tykarma
21.12.2011
Hi DJTT team,

If the S4 mapping doesn't come this week, it won't make it for the 31st gig for me, I need at least a few days to get used to it before using it live.

Even if you still have some minor bugs, can release it ASAP then release a minor update on the 30th if you want.

But please don't make us wait until the day before the gig, we'll either not use it for the year end parties or we'll use it but screw the mix because we won't be comfortable with the new controls yet.

Thanks in advance
Roseanne Torstenson
21.12.2011
this wait is ridiculous...
Lang Abriel
21.12.2011
Originally Posted by DJZILCH
i just bought the DJTT S2 mapping and while the mapping rocks, i am somewhat disappointed in the sudden change in the S2 jogwheel response

With the DJTT mapping the jogwheel feels somewhat laggy, i then tried deleting the mapping and restore to default to find suddenly the jogwheels feel really great again

i figured that the DJTT mapping was built almost entirely from scratch, meaning they kinda lost the HID jogwheel response? can anyone else who has the S2 mapping tell me how they feel about the jogwheel VS the default mapping?
Yeah they lost the HID response, doesn't seem like it would be as important if you are using the mapping, I mean i never really scratch on my s4.

Would have been nice if they just implemented it like the armyofme mapping for the s2 where she just uses midi shift and gets all the joys of HID, u could possibly set that up though...I haven't done a midi mapping on top of the stock mapping.
Jacquiline Alabran
21.12.2011
The suspense is killing me! LOL
Josefina Schutten
22.12.2011
lol where have you heard about it? D:
Kandi Odom
21.12.2011
OMG release it already!!!!!!!!!!!!
Kandra Fagler
21.12.2011
i just bought the DJTT S2 mapping and while the mapping rocks, i am somewhat disappointed in the sudden change in the S2 jogwheel response

With the DJTT mapping the jogwheel feels somewhat laggy, i then tried deleting the mapping and restore to default to find suddenly the jogwheels feel really great again

i figured that the DJTT mapping was built almost entirely from scratch, meaning they kinda lost the HID jogwheel response? can anyone else who has the S2 mapping tell me how they feel about the jogwheel VS the default mapping?
Jacquiline Alabran
21.12.2011
Only 5 days till X-Mas!
Kandi Odom
18.12.2011
Can't wait!!!!!!!!!
Rey Holubar
17.12.2011
Nice! Here is a link, if anyone is interested.

http://twitter.com/DJTechTools

scamo
Roseanne Torstenson
16.12.2011
Just sent djranking s a twitter asking about this mapping and they replied "not sure. I saw Ean and Chris playing with it last evening " Followed by a tweet stating "The s4 mapping will be released next week in time for the holidays" The wait is over!!!!
Adrian Zadrozny
16.12.2011
Hopefully by Christmas. Would be a nice present.
Kayhan Polat
16.12.2011
Originally Posted by Xoduzz
lol i been checking every single day
+1
Tennie Dornburg
16.12.2011
lol i been checking every single day

<< Back to NI - Native Instruments S4/S2 Controller talkReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy