Output send/return
Output send/return Posted on: 02.08.2012 by Bobbie Scothern Wanna use a Korg Kaoss Pad Quad. Got no send/return on controller.So plan is: master cinch OUT (controller) --> cinch IN (Korg) ---> cinch OUT (Korg) --> Somekind of a mixer/splitter with two different outputs: one pair of cinch OUT (goes to my power amplifier) and one pair of xlr (goes to monitor boxes) To summ up the question: need a cheap way of splitting a cinch (RCA) to a cinch (RCA) and 2 xlrs (balanced) must be good sound quality with cheap I mean less than 100 euros I believe Y-Adapters lose a lot of quality. So basicly a box with same output possibilites that some controllers have - master (chinch) and additional xlr (balanced master) | |
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Bobbie Scothern 02.08.2012 | Wanna use a Korg Kaoss Pad Quad. Got no send/return on controller. So plan is: master cinch OUT (controller) --> cinch IN (Korg) ---> cinch OUT (Korg) --> Somekind of a mixer/splitter with two different outputs: one pair of cinch OUT (goes to my power amplifier) and one pair of xlr (goes to monitor boxes) To summ up the question: need a cheap way of splitting a cinch (RCA) to a cinch (RCA) and 2 xlrs (balanced) must be good sound quality with cheap I mean less than 100 euros I believe Y-Adapters lose a lot of quality. So basicly a box with same output possibilites that some controllers have - master (chinch) and additional xlr (balanced master) |
| Marva Cupid 09.08.2012 | Try something like this I have done something similar before and in my experience, if you use decent quality splitters then you have nothing to worry about. Hope it helped. otherwise you could maybe look into some of the powered audio visual splitters used in home entertainment. Like this |
| Kiyoko Wellisch 08.08.2012 | Sounds to me like it would work but you'd be effecting the master output which kinda sucks. |
| Brunilda Kora 05.08.2012 | Come off it. |
| Bobbie Scothern 05.08.2012 | you cant splitt a signal theoreticaly without losing intensity. you need additional preamp to not lose quality (additional power plug for the adaptor) |
| Brunilda Kora 05.08.2012 |
Originally Posted by Roman Nuss
|
| Bobbie Scothern 05.08.2012 | "RCA connector, sometimes called a phono connector or cinch connector" - yeah, my fault its cinch not chinch. Im not going to use a Kp3 - Im talking about a Kaoss Pad Quad. All I need is a kind of a "mixer" that will split signal into cinch (RCA) and XLR from RCA. So all I need is a kind of adapter from RCA to RCA and XLR |
| Jonathan Chiuchiolo 04.08.2012 | no it won't work... you could maybe "jack" your traktor outputs into ableton then with a two in two out soundcard hook your kp3 into the loop then "jack" back to traktor. It would be a pain in the ass if you asked me. You can also use it as a midi controller with these controls. Here is a pretty cool way to map it in VDJ, it would not be possible to map it that way in traktor. |
| Valene Guasp 04.08.2012 | What is a chinch? |
| Bobbie Scothern 04.08.2012 | Bump. Need a suggestion really fast. |
| Bobbie Scothern 02.08.2012 | Would this piece work? : http://www.thomann.de/gb/art_cleanbox_pro.htm Or doesnt it mix one IN to different OUTs? |
<< Back to Reviews of DJ equipment Reply