XONE 42 help!!
XONE 42 help!! Posted on: 01.12.2012 by Tessa Gerou Yooooo I am very new to the community
and first off I would like to say I admire all the positivity on this site It feels like people are trying to help other than talk shit but off topic. I am very new to djing for I was only producing for a year but decided to take it up a notch. I purchased a xone 42 analog mixer and was planning on using the mixer with my two x1's and a maschine mk1(hopefully picking one up within the week). I was djing with my apc40 and x1s for a while but it wasnt doing justice for me. I play strictly minimal/dark grooves like shaded, kris wadsworth, richie, dubfuegooo etc. but I was hoping someone can help me on setting all of this up. Since the 42 is analog theres no midi mapping so How would I set up the 42 with traktor? I know i have to send the info from the comp to the mixer to the audio interface(audio 8) then to speakers? i get lost at this point but im more focused on setting the mixer up with traktor (preferences, directing each deck). I would really love some detailed direction from anyone who has a similar setup or even the same since its a pretty common setup. Any help is greatly appreciated! PS, no im not some spoiled brat buying a 42 for my first mixer, I have a great steady paying job and I really Just wanted to get the setup of my dreams(DB4 when im ready) , Why not if you have the funds | |
| Ulysses Vittetoe 16.12.2012 |
Originally Posted by Oleboi
|
| Tessa Gerou 02.12.2012 |
Originally Posted by DJ Asand
Thanks for the reply back! And thanks for all the help!!! I don't wish to mimic midi with the 42 I was planning on using the x1s to control traktor |
| Tessa Gerou 01.12.2012 | Yooooo I am very new to the community
and first off I would like to say I admire all the positivity on this site It feels like people are trying to help other than talk shit but off topic. I am very new to djing for I was only producing for a year but decided to take it up a notch. I purchased a xone 42 analog mixer and was planning on using the mixer with my two x1's and a maschine mk1(hopefully picking one up within the week). I was djing with my apc40 and x1s for a while but it wasnt doing justice for me. I play strictly minimal/dark grooves like shaded, kris wadsworth, richie, dubfuegooo etc. but I was hoping someone can help me on setting all of this up. Since the 42 is analog theres no midi mapping so How would I set up the 42 with traktor? I know i have to send the info from the comp to the mixer to the audio interface(audio 8) then to speakers? i get lost at this point but im more focused on setting the mixer up with traktor (preferences, directing each deck). I would really love some detailed direction from anyone who has a similar setup or even the same since its a pretty common setup. Any help is greatly appreciated! PS, no im not some spoiled brat buying a 42 for my first mixer, I have a great steady paying job and I really Just wanted to get the setup of my dreams(DB4 when im ready) , Why not if you have the funds |
| Tessa Gerou 11.01.2013 | Thank you for the info! I figured it out right when I pulled out the audio 10, I jump the gun on questions here lol but thank you I really appreciate it |
| Patty Mcgilbra 29.12.2012 | ok so 2xRCA (red/white) from your audio 10 per channel to the Xone 42 Line ins, this should be 8 cables if you intend to use all four traktor decks. then either: 1) XLR main output from the 42 to XLR/TRS in on you speakers 2) Booth out with RCA to you speakers this depends on your speakers and cable lying around, both works fine for short distances at home. this sets you up to play some music on the xone, volume control will be either master for 1 or booth for 2 on the xone. Now in Traktor the audio 10 should be set up automatically by the wizard if you run it. In general it should be like this: deck A Out 1/2, B out 3/4, C 5/6 and D 7/8 |
| Tessa Gerou 29.12.2012 | Christmas was good to me, swooped an audio 10 might as well I guess haha, so I take it I would need dual RCA cables both red whites on each side for each deck I wanna play with? Then quarter inch cables to direct te speakers to the mixer? Would I need quarter to xlr for the speakers to mixer? This cable ish annoys the hell out of me -____- |
| Ulysses Vittetoe 16.12.2012 |
Originally Posted by Oleboi
|
| Tessa Gerou 16.12.2012 | Quick question to anyone who is still on this post; say I want to use 2 x1s, a maschine and a xone 42, whats the best possible audio interface if i cant find a audio 6 or an 8? |
| Ralph Alderette 03.12.2012 | fasho! hmu if you need any more help. i'll be glad to help out by phone even. |
| Tessa Gerou 02.12.2012 |
Originally Posted by DJ Asand
Thanks for the reply back! And thanks for all the help!!! I don't wish to mimic midi with the 42 I was planning on using the x1s to control traktor |
| Ralph Alderette 02.12.2012 | So you're trying to use the Xone:42 as a MIDI controller for Traktor? Please don't.. you'd be wasting a mixer. Set up your soundcard the way Chris Macom suggested and use your X1's to control the software. btw I pm'd you back about my Maschine controller |
| Bunny Sockel 02.12.2012 | Traktor will need to send midi clock to maschine here's a video on how to do it
P.S the maschine is amazing when you're playing techno i love it |
| Malka Wickerham 01.12.2012 | Forgot. Plug your controller into laptop and select it in preferences, controller manager. |
| Malka Wickerham 01.12.2012 | Plug Audio 8 into your computer. Plug Audio 8's outputs into the back of your Xone. Plug speakers into back of mixer. Open Traktor go to preferences, Audio setup and make sure your Audio 8 is selected as the audio device. Click output routing then select external mixing. |
<< Back to Reviews of DJ equipment Reply