Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

Maschine MKII Routine Video & Free Mappings

Home :: General Discussion :: Maschine MKII Routine Video & Free MappingsReply

Maschine MKII Routine Video & Free Mappings Posted on: 24.06.2013 by Joannie Brague Hey Guys, I wanted to share with ya'll my Maschine MKII mappings. Check out the routine and the walkthrough video below. Cheers, Priscilla Download Here: http://on.fb.me/XdtCWU Read More Here http://bit.ly/14l40va Routine Walkthrough
Joannie Brague 30.07.2013	Originally Posted by Culture_Shock Awesome routine, awesome mapping! I don't even have a Maschine, but I'm always looking for more mapping techniques to work into the controllers I do have, thanks a lot. No problem. Let me know how you adapt it to other controllers.
Joannie Brague 27.06.2013	Originally Posted by botstein Awesome
Joannie Brague 26.06.2013	Originally Posted by Big Panda Argh only just bought a Z2 and want a maschine now too! Also love your blog Priscilla. I never play trap, except for once a month where I have a few hours mixing your sunday digs. Keep up the good work! Hehe. Thanks
Joannie Brague 25.06.2013	Originally Posted by BiggChev Priscilla going H.A.M. as always! Love the routine, and always grateful for the walk-through. Thanks! Thank You!
Kellie Myrum 25.06.2013	Originally Posted by jdownesbaird Thanks for the response. That's weird. Stewe, do you have any idea why that would happen? Nope. Never had this issue in my mappings even with 'restore parameters while switching FX' checked. The only issue I found with store preset is that preset won't work while loading certain effects in to some of slots in unit 2 and 3.
Joannie Brague 24.06.2013	Originally Posted by jdownesbaird Cool, thanks. Strange that it wouldn't already be in there, since the mapping has been road tested by some pro DJs. I'll take a closer look. I had some weird issues with adding the Preset store. Not sure why but I would still get a weird pop in the audio. The way around this is a very subtle tap of the pad to "prime" the effect. Taurus the Producer who used this at Low End Theory Japan said this is the only effective way for it to be fool proof and not act weird with the FC preset store command.
Kellie Myrum 29.09.2013	Yeah, first thing remove all of the Unit route commands and replace them with this concept. Now since the upper buttons are addressing same effects to specific deck from both sides you probably want to delete one set of commands (clone) and replace them with some other effects that you like the most. The commands you're looking for are Mixer > FX Unit 1,2,3,4 On
Delena Katherman 27.09.2013	Thanks for the quick reply, Stewe! That's exactly what I would love to be able to do with this mapping, but I'm not sure the easiest way to get there. Would it also be a quicker (less elegant) solution if I took out the commands that shut off the effects units on other decks when effects are engaged? Right now, here's how this mapping works. By pressing the A group button, the Maschine pads will activate various effects or cue points on deck A. Pressing B does the same for deck B. For the knobs at the top, the 4 left knobs/buttons control effects for deck A and the 4 on the right control deck B, regardless of which Group button is pushed. Group button, as mentioned, just changes the pads. When pressing a pad (or turning a knob) to activate an effect (like beatmasher, for example), the effect will activate for only the selected deck. However, the problem is that it also DEACTIVATES any effects units that are on for other decks. This is the command I would like to remove. At least I could then turn on effects units for deck C by using the pads assigned normally for A or B (whichever isn't currently playing a track). What specific commands would I be looking for to remove this "deactivation" when pressing a pad or turning a knob?
Kellie Myrum 27.09.2013	Need more input on how mapping currently address buttons I afraid. As for now I can suggest changing selection to this concept that I use in my mappings in 4FX unit mode: If that was me I'd probably go adding this for buttons A,B,C,D as a deck focus so you can select deck and route your FX units to that deck in a single press. And the shift function locks the focus and allow multiple deck selection buttons. I call it the "unit focus" feature Next step would be making use of the button row next to pads as a pad function (7 plus shift) and this would be optional for each deck separately. I know it sound quite complex to work for some people but true potential of this controller is endless as well as your performance mapping tools.
Delena Katherman 27.09.2013	I've been using this mapping since you released it publicly, and it is now an essential part of my workflow. However, it's so close to perfect, but I really wish there was a way to also use it on Decks C and D. A and B are my track decks, and C is my remix deck. D is live input. I would love to be able to use the effects on (especially) my remix deck. If I turn on an effects unit on deck C, it gets shut off the moment I press a button on the Maschine controller. Obviously I could make deck A a remix deck, but then I lose the ability to use this mapping's effects on that track deck. What would be the easiest way for me to make this work correctly for me? Should I edit the mapping to remove commands that automatically turn off effects units for deck C when buttons are pushed on the Maschine controller? Or, would it be possible to map additional Maschine banks for controlling deck C/D? I would greatly appreciate any insight. And, Stewe I would love your guidance as well!
Joannie Brague 30.07.2013	Originally Posted by Culture_Shock Awesome routine, awesome mapping! I don't even have a Maschine, but I'm always looking for more mapping techniques to work into the controllers I do have, thanks a lot. No problem. Let me know how you adapt it to other controllers.
Deangelo Boender 29.07.2013	Awesome routine, awesome mapping! I don't even have a Maschine, but I'm always looking for more mapping techniques to work into the controllers I do have, thanks a lot.
Joannie Brague 28.07.2013	ahh that makes sense.
Joannie Brague 27.06.2013	Originally Posted by botstein Awesome
Joannie Brague 26.06.2013	Originally Posted by Big Panda Argh only just bought a Z2 and want a maschine now too! Also love your blog Priscilla. I never play trap, except for once a month where I have a few hours mixing your sunday digs. Keep up the good work! Hehe. Thanks
Joannie Brague 25.06.2013	Originally Posted by BiggChev Priscilla going H.A.M. as always! Love the routine, and always grateful for the walk-through. Thanks! Thank You!
Kellie Myrum 25.06.2013	Originally Posted by jdownesbaird Thanks for the response. That's weird. Stewe, do you have any idea why that would happen? Nope. Never had this issue in my mappings even with 'restore parameters while switching FX' checked. The only issue I found with store preset is that preset won't work while loading certain effects in to some of slots in unit 2 and 3.
Sydney Lashway 25.06.2013	Priscilla going H.A.M. as always! Love the routine, and always grateful for the walk-through. Thanks!
Delena Katherman 24.06.2013	Thanks for the response. That's weird. Stewe, do you have any idea why that would happen?
Joannie Brague 24.06.2013	Originally Posted by jdownesbaird Cool, thanks. Strange that it wouldn't already be in there, since the mapping has been road tested by some pro DJs. I'll take a closer look. I had some weird issues with adding the Preset store. Not sure why but I would still get a weird pop in the audio. The way around this is a very subtle tap of the pad to "prime" the effect. Taurus the Producer who used this at Low End Theory Japan said this is the only effective way for it to be fool proof and not act weird with the FC preset store command.
Delena Katherman 24.06.2013	Cool, thanks. Strange that it wouldn't already be in there, since the mapping has been road tested by some pro DJs. I'll take a closer look.
Kellie Myrum 24.06.2013	I didn't look into this mapping jet but if there aren't any modifiers going on it should be pretty easy. Add In > FX Unit > FX Store Preset Just map it to all four Beatmash buttons and assign to corresponding FX unit.
Delena Katherman 24.06.2013	Originally Posted by Stewe Probably just FX store preset command is missing. Is this easy for me to add?
Kellie Myrum 24.06.2013	Originally Posted by jdownesbaird This mapping is a lot of fun. I just ordered a Xone DB2 and am getting rid of my S4, and will be using my Maschine for routines anyway. So, this is the perfect mapping for me, as soon as I get a couple X1 mkIIs! Question: Is there a way to switch back to the beatmasher effects without the audio drop out? I know Traktor acts funny when switching between the presets, but I've seen other mappings where you "prime" the new effect the first time you press a button (no effect, no dropout) and then you can activate it at will after that. Am I doing something wrong here? Probably just FX store preset command is missing.
Delena Katherman 24.06.2013	This mapping is a lot of fun. I just ordered a Xone DB2 and am getting rid of my S4, and will be using my Maschine for routines anyway. So, this is the perfect mapping for me, as soon as I get a couple X1 mkIIs! Question: Is there a way to switch back to the beatmasher effects without the audio drop out? I know Traktor acts funny when switching between the presets, but I've seen other mappings where you "prime" the new effect the first time you press a button (no effect, no dropout) and then you can activate it at will after that. Am I doing something wrong here?
Dedra Kreinbring 24.06.2013	Originally Posted by Paka Ono Thanks again for sharing your amazing videos! I want to go out and buy a Maschine right now! Argh only just bought a Z2 and want a maschine now too! Also love your blog Priscilla. I never play trap, except for once a month where I have a few hours mixing your sunday digs. Keep up the good work!
Gaynell Rydberg 24.06.2013	Your videos are always amazing.
Ervin Calvery 24.06.2013	Awesome
Neville Blackinton 24.06.2013	Thanks again for sharing your amazing videos! I want to go out and buy a Maschine right now!
Joannie Brague 24.06.2013	Originally Posted by jdownesbaird Got it. Thanks for the quick reply. Does it remove the function, or simply the layout change? Just the visual layout change. Function is a go.
Delena Katherman 24.06.2013	Got it. Thanks for the quick reply. Does it remove the function, or simply the layout change?
Joannie Brague 24.06.2013	Originally Posted by jdownesbaird FYI, when the TSI is imported using the instructions provided ("a small dialogue will come up with "effect settings" "controller mappings" and a few other boxes highlighted. Click OK.") many of your personal Traktor settings take effect. The deck layouts, the mapping menu (some mapping called Turntables: BPM training), the playlists/favorites (Sunday Digs?), and more. All we should really import to avoid your personal settings is "Controller Mappings" and "Effects Settings". The other highlighted boxes should be unchecked, right? Thanks for your hard work, and I'll be checking it out very soon when my Maschine is in front of me. There is a part of the mapping where you have control over master tempo and it will automatically switch the layout for you so you have the master clock up, if you don't need this feature all you have to do is import the controller and effect settings. Unfortunately Traktor has the playlists and the gui stuff grouped up so there was no way to separate this.
Delena Katherman 24.06.2013	FYI, when the TSI is imported using the instructions provided ("a small dialogue will come up with "effect settings" "controller mappings" and a few other boxes highlighted. Click OK.") many of your personal Traktor settings take effect. The deck layouts, the mapping menu (some mapping called Turntables: BPM training), the playlists/favorites (Sunday Digs?), and more. All we should really import to avoid your personal settings is "Controller Mappings" and "Effects Settings". The other highlighted boxes should be unchecked, right? Thanks for your hard work, and I'll be checking it out very soon when my Maschine is in front of me.
Joannie Brague 24.06.2013	Originally Posted by jdownesbaird I can't wait to try this! Looks awesome. Awesome. Let me know how it works out.
Joannie Brague 24.06.2013	Thanks for that. It's good to know the extra hardwork gets noticed
Joannie Brague 24.06.2013	Originally Posted by 031999 dude crank this video up, it is a must watch!!!! this girl needs to be on the DJTECHTOOLS team!....Ean, Zach, Dan..... Are you listening? lol this is a great mapping with many more to come i'm sure! Thanks!
Joannie Brague 24.06.2013	Originally Posted by Rukks No headphones at the moment so I apologize if this is mentioned in the video...but does the mapping work for the MKI, or can it be easily changed to function essentially the same with the MKI? Thanks again, video looks good, wish I wasn't in a quiet place without headphones to listen to it. I tested this on the MKI and didn't have any success importing the controller editor profile. They are however basic CCs so if you have the patience to test and debug, it should work, but unfortunately there was no quick fix for this. Give it a go and let me know if it works. I'd appreciate your feedback
Kellie Myrum 24.06.2013	It's nice mapping but your videos are amazing!
Delena Katherman 24.06.2013	I can't wait to try this! Looks awesome.
Lannie Kutay 24.06.2013	Originally Posted by Rukks No headphones at the moment so I apologize if this is mentioned in the video...but does the mapping work for the MKI, or can it be easily changed to function essentially the same with the MKI? Thanks again, video looks good, wish I wasn't in a quiet place without headphones to listen to it. dude crank this video up, it is a must watch!!!! this girl needs to be on the DJTECHTOOLS team!....Ean, Zach, Dan..... Are you listening? lol this is a great mapping with many more to come i'm sure!

<< Back to General Discussion Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Jamaica is:

Maschine MKII Routine Video & Free Mappings