Hercules RMX mapping

Home :: Post and find Controller Mappings :: Hercules RMX mappingReply
Hercules RMX mapping
Posted on: 15.11.2010 by Somer Vanstraten
http://www.djranking s.com/community /sho...538#post182538

Mapping is done, go to this thread

http://www.djranking s.com/community /sho...538#post182538















First at all, sorry for my english.
So, i'm mapping a RMX for traktor pro 1.2.7
I believe is a quite good work, 2 deks, jugglin mode with 8 cue point and delete option on the go, fx mode, with 4 chained fx, 2 controlled with gain and eq and 2 controlled with jog and fader.
I cant figure out a thing, effect 3 on with the fader in 0 position, like in the VCI mapping of Ean.
Someone can help me?

The dj ranking s mapping are awesome, i'm believeing of editing the vci mapping and adapt it to the rmx.
Or someone has already a real pro mapping for rmx like the vci one?

thank you

Saluti from Italy
Somer Vanstraten
19.11.2010
Originally Posted by Ulle
The RMX is unfortunately not made for 4 decks and either for Traktor.. well, the console is alright, but Virtual dj is not. Its a bit weird no one else has done an good tsi before?
Thanks "Cionni" for the time you put in this I tried mapping 4 decks myself, but didn't figure it out.. Let us know when you got it Peace!
http://www.djranking s.com/community /sho...538#post182538

is finished! have a look, try it, and let me know.
Somer Vanstraten
17.11.2010
Originally Posted by kjeldbjerg
Well, I don't know, are you using the STOP button for anything yet? I know i am not.. So, maybe make this your shift button (maybe add lights in cue and plkay to show that your in shift), and when the shift is on, you control deck c and d in the exact same way as a and b in normal mode..?
It could be! I was believeing Also, to map the load button to the left and right arrow buttons in the center of the consol. Load a and load b original button to' be monitor cue, and the original monitor cue to a-c and b-d switches.

I don't know if you have seen the tsi.
Now pressing scratch button out rmx in fx mode. Knob and gain an buttons Are used for fx 1-2 and jog and faders for fx3-4.
Shift button (source 2) is for fx preset.
Source 1 is a 3 value modifier. 0 is BASIC mode, 1 juggle 1-4 , 2 is juggle 5-8. And can be acrivated Also in fx mode.
Shif is for deleting cue point.

This is in general my tsi.

Too much modifiers for a 4 deck mapping, i'm trying to understand how vci works with 4 decks.

Or, making mapping with less option( Or in a smarter way) and put 4 decks.
Chae Gnatek
17.11.2010
Originally Posted by CionniAsDj
I'm starting a new mapping for complete function with four deck. Like in the vci.
Having some problem because the rmx have Very few knobs.

Before starting, i was believein of changing the layout. Now It's like 2 juggle layout mode, 1 fx layout, 1 BASIC layout and shift layouts for every layout that i say.

I'm believeing of make this simpler, cause i haven't enough modifier to use this exact setting and 4 decks.

I'm begging for opinion, how can i do? I don't want a mapping, only opinion about a ideal layout.
I'll do the mapping on my own.

Thank you
Well, I don't know, are you using the STOP button for anything yet? I know i am not.. So, maybe make this your shift button (maybe add lights in cue and plkay to show that your in shift), and when the shift is on, you control deck c and d in the exact same way as a and b in normal mode..?
Somer Vanstraten
15.11.2010		http://www.djranking s.com/community /sho...538#post182538

Mapping is done, go to this thread

http://www.djranking s.com/community /sho...538#post182538















First at all, sorry for my english.
So, i'm mapping a RMX for traktor pro 1.2.7
I believe is a quite good work, 2 deks, jugglin mode with 8 cue point and delete option on the go, fx mode, with 4 chained fx, 2 controlled with gain and eq and 2 controlled with jog and fader.
I cant figure out a thing, effect 3 on with the fader in 0 position, like in the VCI mapping of Ean.
Someone can help me?

The dj ranking s mapping are awesome, i'm believeing of editing the vci mapping and adapt it to the rmx.
Or someone has already a real pro mapping for rmx like the vci one?

thank you

Saluti from Italy
Lucius Breitigan
22.11.2010		Thank you! I have still got this problem i allways had combining my RMX with traktor.. when i have the rmx connected and everything seems to be working fine in traktor with the TSI and everything. Its just that when i close the preferences menu after choosing your, or any elses TSI, it automaticly goes back to "generic keyboard" and the Rmx wont work.. as if traktor wont use the rmx or something.. Cant figure this out... anyone familiar with this? Im kind of Done using Virtual DJ
Somer Vanstraten
19.11.2010
Originally Posted by Ulle
The RMX is unfortunately not made for 4 decks and either for Traktor.. well, the console is alright, but Virtual dj is not. Its a bit weird no one else has done an good tsi before?
Thanks "Cionni" for the time you put in this I tried mapping 4 decks myself, but didn't figure it out.. Let us know when you got it Peace!
http://www.djranking s.com/community /sho...538#post182538

is finished! have a look, try it, and let me know.
Lucius Breitigan
18.11.2010		The RMX is unfortunately not made for 4 decks and either for Traktor.. well, the console is alright, but Virtual dj is not. Its a bit weird no one else has done an good tsi before?
Thanks "Cionni" for the time you put in this I tried mapping 4 decks myself, but didn't figure it out.. Let us know when you got it Peace!
Somer Vanstraten
18.11.2010		I mapped a 4 deck complete mapping, more complete respect other on the community .
i cant figure out only one thing.
led on play button when switching decks.
if deck a is playing and i select deck c, and deck c is stopped, the led is still open!

how can i do?
after that, i'll post layout and tsi.

is 3 pages of mapping so quite long
Somer Vanstraten
17.11.2010
Originally Posted by kjeldbjerg
Well, I don't know, are you using the STOP button for anything yet? I know i am not.. So, maybe make this your shift button (maybe add lights in cue and plkay to show that your in shift), and when the shift is on, you control deck c and d in the exact same way as a and b in normal mode..?
It could be! I was believeing Also, to map the load button to the left and right arrow buttons in the center of the consol. Load a and load b original button to' be monitor cue, and the original monitor cue to a-c and b-d switches.

I don't know if you have seen the tsi.
Now pressing scratch button out rmx in fx mode. Knob and gain an buttons Are used for fx 1-2 and jog and faders for fx3-4.
Shift button (source 2) is for fx preset.
Source 1 is a 3 value modifier. 0 is BASIC mode, 1 juggle 1-4 , 2 is juggle 5-8. And can be acrivated Also in fx mode.
Shif is for deleting cue point.

This is in general my tsi.

Too much modifiers for a 4 deck mapping, i'm trying to understand how vci works with 4 decks.

Or, making mapping with less option( Or in a smarter way) and put 4 decks.
Chae Gnatek
17.11.2010
Originally Posted by CionniAsDj
I'm starting a new mapping for complete function with four deck. Like in the vci.
Having some problem because the rmx have Very few knobs.

Before starting, i was believein of changing the layout. Now It's like 2 juggle layout mode, 1 fx layout, 1 BASIC layout and shift layouts for every layout that i say.

I'm believeing of make this simpler, cause i haven't enough modifier to use this exact setting and 4 decks.

I'm begging for opinion, how can i do? I don't want a mapping, only opinion about a ideal layout.
I'll do the mapping on my own.

Thank you
Well, I don't know, are you using the STOP button for anything yet? I know i am not.. So, maybe make this your shift button (maybe add lights in cue and plkay to show that your in shift), and when the shift is on, you control deck c and d in the exact same way as a and b in normal mode..?
Somer Vanstraten
17.11.2010		I'm starting a new mapping for complete function with four deck. Like in the vci.
Having some problem because the rmx have Very few knobs.

Before starting, i was believein of changing the layout. Now It's like 2 juggle layout mode, 1 fx layout, 1 BASIC layout and shift layouts for every layout that i say.

I'm believeing of make this simpler, cause i haven't enough modifier to use this exact setting and 4 decks.

I'm begging for opinion, how can i do? I don't want a mapping, only opinion about a ideal layout.
I'll do the mapping on my own.

Thank you
Somer Vanstraten
16.11.2010		So, i got finally a TSI, written in the basic by me and with part of the vci tsi.

2 deck (at the moment i dont need 4, but i can add this thing at the tsi), juggle mode 1-4 and 4-8 with deleting option on the go.
FX mode and Fader FX mode, with some upgrade.(4 FXslot)
FX preset for 2 Fx chained slot, the same of the vci, each Fx preset has a button, possibility to manually change every single fx with shift and knobs (in a preset or in a chained fx)
Shift function for most of the buttons.

It doesn't have, rapid button for echo, slider and "sampler" (the advance FX)
Thinking of adding them or not.


I'll post a video or a layout of the mapping.

if someone want test it i'll attach the TSI.

Give me feedbacks please, I wanto to make it better.








NEW VERSION with some bug fixed soon, with video explanation.

Now working on the same complete configuration with 4 decks
Somer Vanstraten
15.11.2010		I'm studing all the video of the vci mapping and all the tsi.
I'm gonna select the respective buttons knobs and fader on the rmx and re-learn the midi.
3 pages of writing right now for learning the configuration ahah

I'm gonna share with you when finish.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy