Hercules RMX Toggle Modifier

Home :: Post and find Controller Mappings :: Hercules RMX Toggle ModifierReply
Hercules RMX Toggle Modifier
Posted on: 10.02.2011 by Carita Soucek
So I'm trying to get my Hercules RMX scratch button to become my modifier. I want to be able to toggle my modifier on and off. Is there anyway I can do that? I've been trying for quite a while but have had no luck.
Carita Soucek
11.02.2011
Originally Posted by StuC
Haha, what I didn't try was the inc/dec... Thanks again
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
YES!!! There we go!!! Thank you very much!!! That's exactly what I want it to do
Originally Posted by 08:42PM
Method1
add in Modifier1
Modifier1 = CH1 CC41
DIRECT
Value 1
(modifier condition => M1=0

copy command

Modifier1 = CH1 CC41
DIRECT
Value= 0
(modifier condition => M1=1[/B]



(OR if you don't want use DIRECT, use increase decrease with the modifier conditions)
Carita Soucek
11.02.2011
Originally Posted by StuC
so... last try

if you configure you're modifier that way... it works...
that easy

good luck
YES!!! There we go!!! Thank you very much!!! That's exactly what I want it to do
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
Still nothing.
so... last try

if you configure you're modifier that way... it works...
that easy

good luck
Carita Soucek
11.02.2011
Originally Posted by StuC
hmm.. you're on windows.. add .xml as sufix..

or download this
http://hotfile.com/dl/103801721/50a7...c.tsi.xml.html
Still nothing.
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
Neither of them picked up. It's just blank when I import them into Traktor.
hmm.. you're on windows.. add .xml as sufix..

or download this
http://hotfile.com/dl/103801721/50a7...c.tsi.xml.html
Carita Soucek
11.02.2011
Originally Posted by StuC
here it is. http://ul.to/jea4yb

you need the m3taltr0nic tsi
(if you will can you test my settings)
Neither of them picked up. It's just blank when I import them into Traktor.
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
I just tried this method and it's still not working out. It's still working the same way as before, where I need to hold the "Scratch" button down to trigger my modifiers.
i also own a hercules rmx, upload your TSI File (www.upload.to)

take a quick look, i know its working, it's working on my own.
Carita Soucek
11.02.2011
Originally Posted by StuC



Well... your Button is CC41 (i expect Channel1), the button has in his Standart Configuration = TOGGLE
edit: wrong... pressed = 127

So in Traktor say


Method1
add in Modifier1
Modifier1 = CH1 CC41
DIRECT
Value 1
(modifier condition => M1=0

copy command

Modifier1 = CH1 CC41
DIRECT
Value= 0
(modifier condition => M1=1[/B]


(OR if you don't want use DIRECT, use increase decrease with the modifier conditions)
I just tried this method and it's still not working out. It's still working the same way as before, where I need to hold the "Scratch" button down to trigger my modifiers.
Franklin Momany
11.02.2011
Originally Posted by tombruton69
hey my book covers this topic. there is a download link in my signiture. A full explination of how to do this is on page 17 of the alpha edition.

Sorry for pushing my book so hard every1(it is free tho)
On the OT, you may already have or w/e. But you outta hit up the mixtape art thread and see if they can make you a cool cover. I imagine a For Dummies books series type cover.
Carita Soucek
10.02.2011		So I'm trying to get my Hercules RMX scratch button to become my modifier. I want to be able to toggle my modifier on and off. Is there anyway I can do that? I've been trying for quite a while but have had no luck.
Carita Soucek
11.02.2011
Originally Posted by StuC
Haha, what I didn't try was the inc/dec... Thanks again
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
YES!!! There we go!!! Thank you very much!!! That's exactly what I want it to do
Originally Posted by 08:42PM
Method1
add in Modifier1
Modifier1 = CH1 CC41
DIRECT
Value 1
(modifier condition => M1=0

copy command

Modifier1 = CH1 CC41
DIRECT
Value= 0
(modifier condition => M1=1[/B]



(OR if you don't want use DIRECT, use increase decrease with the modifier conditions)
Carita Soucek
11.02.2011
Originally Posted by StuC
so... last try

if you configure you're modifier that way... it works...
that easy

good luck
YES!!! There we go!!! Thank you very much!!! That's exactly what I want it to do
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
Still nothing.
so... last try

if you configure you're modifier that way... it works...
that easy

good luck
Carita Soucek
11.02.2011
Originally Posted by StuC
hmm.. you're on windows.. add .xml as sufix..

or download this
http://hotfile.com/dl/103801721/50a7...c.tsi.xml.html
Still nothing.
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
Neither of them picked up. It's just blank when I import them into Traktor.
hmm.. you're on windows.. add .xml as sufix..

or download this
http://hotfile.com/dl/103801721/50a7...c.tsi.xml.html
Carita Soucek
11.02.2011
Originally Posted by StuC
here it is. http://ul.to/jea4yb

you need the m3taltr0nic tsi
(if you will can you test my settings)
Neither of them picked up. It's just blank when I import them into Traktor.
Jacki Agrillo
11.02.2011		here it is. http://ul.to/jea4yb

you need the m3taltr0nic tsi
(if you will can you test my settings)
Carita Soucek
11.02.2011		Okay, I uploaded my current TSI, you can take a look at how I have it setup currently.

TSI: http://ul.to/3zjl1d
Jacki Agrillo
11.02.2011
Originally Posted by m3taltr0nic
I just tried this method and it's still not working out. It's still working the same way as before, where I need to hold the "Scratch" button down to trigger my modifiers.
i also own a hercules rmx, upload your TSI File (www.upload.to)

take a quick look, i know its working, it's working on my own.
Carita Soucek
11.02.2011
Originally Posted by StuC



Well... your Button is CC41 (i expect Channel1), the button has in his Standart Configuration = TOGGLE
edit: wrong... pressed = 127

So in Traktor say


Method1
add in Modifier1
Modifier1 = CH1 CC41
DIRECT
Value 1
(modifier condition => M1=0

copy command

Modifier1 = CH1 CC41
DIRECT
Value= 0
(modifier condition => M1=1[/B]


(OR if you don't want use DIRECT, use increase decrease with the modifier conditions)
I just tried this method and it's still not working out. It's still working the same way as before, where I need to hold the "Scratch" button down to trigger my modifiers.
Jacki Agrillo
11.02.2011


Well... your Button is CC41 (i expect Channel1), the button has in his Standart Configuration = TOGGLE
edit: wrong... pressed = 127

So in Traktor say


Method1
add in Modifier1
Modifier1 = CH1 CC41
DIRECT
Value 1
(modifier condition => M1=0

copy command

Modifier1 = CH1 CC41
DIRECT
Value= 0
(modifier condition => M1=1[/B]


(OR if you don't want use DIRECT, use increase decrease with the modifier conditions)
Carita Soucek
11.02.2011		Thanks for all the responses guys, but I must be really retarded or something. I still can't get the modifier to function the way I want it to. Like I've tried every single way you guys have suggested to me. I'm just trying to get my "Scratch" button to work as a toggle on/off modifier button. Like for other features I do have the choice of changing the "Interaction Mode" to "Toggle," but when I'm trying to do it for the modifier, it doesn't allow me to select that option. I don't know if you understand what I'm trying to achieve.
Jacki Agrillo
11.02.2011		i don't know exactly what you're looking for. But you can make a Button Toggle, in Traktor, or even say the RMX how the Button acts...

If second one, you need this
Hercules MIDI Mapper v1.0 2009-07-30

Hercules Midi Mapper is a tool to change the MIDI commands sent or received by Hercules DJ Console Rmx and DJ Control Steel.

The function of this software it to provide advanced users a solution to map DJ software which can hardly be controlled by Hercules DJ Console Rmx and Hercules DJ Control Steel default MIDI commands (Control Change).

It is ONLY for advanced users, understanding MIDI commands.

It is not compatible with any other Hercules DJ devices (DJ Console Mk1, Mk2 and DJ Control MP3).

Minimum System Requirements:

- Hercules DJ Console Rmx or a DJ Control Steel

- Mac OS X 10.4/ 10.5/ 10.6 , with driver Unified 1.09 or superior.

- Windows XP/ Vista , with driver 1.HDJ.2009 or superior .

Notes:

This software is provided as a courtesy. There will be no technical support for this software, neither through the hot line or the email service.

[Mac OS X 10.4 (Tiger)/ 10.5 (Leopard)] 6 MB
[Windows XP/ Vista] 7 MB
Franklin Momany
11.02.2011
Originally Posted by tombruton69
hey my book covers this topic. there is a download link in my signiture. A full explination of how to do this is on page 17 of the alpha edition.

Sorry for pushing my book so hard every1(it is free tho)
On the OT, you may already have or w/e. But you outta hit up the mixtape art thread and see if they can make you a cool cover. I imagine a For Dummies books series type cover.
Marguerite Truka
10.02.2011		hey my book covers this topic. there is a download link in my signiture. A full explination of how to do this is on page 17 of the alpha edition.

Sorry for pushing my book so hard every1(it is free tho)
Franklin Momany
10.02.2011		What your looking for is to toggle between two modifier values. So if the button your describing changes between two midi notes it can be done. But if it doesn't send two midi notes like explained above, two buttons are required to get the toggle effect.

I sound like a broken record about now, but you want to look into direct modifiers. When pushed they will enter value constantly until another modifier of the same group is pushed (M1=1 M1=2).

For example, let say your shift button send a midi note of C1 the first time you press it.
The second time you press it, its send midi note D0. So you would want M1=1 set for C1 and M1=2 for D0.

Then the functions (cues,play,loops etc.) have to be assigned to which modiers value you want them to work with.

I made a mapping that uses this type of mapping. I call them modes you can check them out here: http://www.djranking s.com/community /showthread.php?t=23676

good luck,
Digi

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy