Reply to Rane 68 Traktor two deck mapping

This TSI is Zach Stone's from Rane/Serato

Open Traktor, open the preferences, click 'Import' at the bottom of the page, and select the preset.

The side strips are mapped as followed from top to bottom:

1. Scroll knobs mapped to scroll through the library.
2. Pressing down on Scroll knob A loads the selected track to the left deck. Pressing down on B loads track to right deck.
3. Manual/Auto button not mapped to anything.
4. Loops select knob mapped to scroll through loops on either deck A or B.
5. Pressing down on Loop select knobs triggers loops on A or B.
6. Loop IN button triggers a 16bar Loop Jump Forward for both decks.
7. Loop OUT button triggers a 16bar Loop Jump Backwards for both decks.
8. Loop/Save buttons turn on SYNC for either deck A or B.
9. Delete is mapped to the Play button for both decks .
10. Cue buttons 1-5 are mapped to the the Cue points.

I also mapped the Mic section plus a couple buttons on the side strips with Advanced FX loaded on 1&2 effect inserts:

1. Mic 1 button turns on the Advanced FX 1 (left side effect) and Mic 2 button turns the Advanced FX 2 (right side).

2. Level pots turn up/down the wet/dry of effect.

3. Pan pot controls Effect Parameter 1.

4. High pot controls Effect Parameter 2.

5. Low pot controls Effect Parameter 3.

6. * I mapped the 'back' buttons on the left/right side strips to the Effect Parameter Reset.

7. * Manual/Auto button on left/right side strips are mapped to trigger the Effect Button 1 (This is the button next to the Effect Parameter Reset in the FX section and is also the FRZ button when using a Delay effect).

8. The Flex FX buttons underneath the mic section are set as Modifier 1.
To scroll through the different FX hold down the Flex Fx button and turn the Level pot at the top of the mic strip.


Have fun and feel free to pass this along to whomever.