Mixmeister Control, Traktor Kontrol X1 and Traktor Pro

Home :: Post and find Controller Mappings :: Mixmeister Control, Traktor Kontrol X1 and Traktor ProReply
Mixmeister Control, Traktor Kontrol X1 and Traktor Pro
Posted on: 15.01.2011 by Ignacio Hoal
HI
Right now I made this I'm still working on it, not all knobs and buttons are used (I'll put TSI when it will be done). Some of the functions are mapped to the traktor kontrol X1 (stock mapping).

It's 4 deck and 4 fx unit mapping, 2 chained FX unit are on this controller and 2 advanced fx on Traktor Kontrol X1 .
FX unit 1 and 2 are advanced, 3 and 4 are chained.
I'm using Fx unit 1 and 3 on deck A and C, Fx unit 2 and 4 on deck B and D.

Jog wheel is set to device target and have modifier.



I cant set the deck focus buttons leds to show which deck is set, there is only deck focus setting in traktor and no choice of deck. If anyone know how to set this I will be grateful for the help.

Any suggestions are welcome.

Fx Set 1 is from Priscilla's tutorial (little changed)
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE[/ame]
Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Ignacio Hoal
15.01.2011		HI
Right now I made this I'm still working on it, not all knobs and buttons are used (I'll put TSI when it will be done). Some of the functions are mapped to the traktor kontrol X1 (stock mapping).

It's 4 deck and 4 fx unit mapping, 2 chained FX unit are on this controller and 2 advanced fx on Traktor Kontrol X1 .
FX unit 1 and 2 are advanced, 3 and 4 are chained.
I'm using Fx unit 1 and 3 on deck A and C, Fx unit 2 and 4 on deck B and D.

Jog wheel is set to device target and have modifier.



I cant set the deck focus buttons leds to show which deck is set, there is only deck focus setting in traktor and no choice of deck. If anyone know how to set this I will be grateful for the help.

Any suggestions are welcome.

Fx Set 1 is from Priscilla's tutorial (little changed)
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE[/ame]
Ignacio Hoal
24.03.2011		Here is my mapping.
mix_meister_control_kontrol_x1_GAIDJIN.zip

Two knobs and one button are not in use, but they will be
Still working on it,its with working leds and volume leds are set as beat phase monitors

More description soon.
HAPPY TESTING





In this mapping is also Hotkey Mappings for computer keyboard.
[ame="http://www.youtube.com/user/armyofme4340#p/u/10/d6ayN_WJOOw"]Hotkey Mappings for computer keyboard[/ame]
Ignacio Hoal
15.03.2011
Originally Posted by Nosferatu
I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
That's great!

I almost finished my tsi, hope to finish it this weekend.

I also modified original X1 settings (just a little).
But my settings are for use Mixmeister Control with Kontrol X1 or other controller mapped like my X1.

I will post tsi on freaks and link in this post in next week.



EDIT
New mapping pictures.



Priscillas dynamic sweep build-up.
[ame="http://www.youtube.com/user/armyofme4340#p/u/4/lMbsAIBs3uE"]YouTube - armyofme4340's Channel[/ame]

Tyisha Towle
15.03.2011		I'm just about finished with my .tsi for the Mixmeister Control.

I will post the .tsi on traktorfreaks..but it should be noted, this is not a cue juggling mapping. I mapped the keys for straight up mixing (deep house) with effects, eq kills, looping, with working LEDs.

Since there aren't a whole lot of smart knobs (knobs that also double as buttons), the workflow relies on a lot of modifiers, so there's a fair bit of two-handed maneuvers involved....but I tried to map the modifiers close by, so you can do it if you have long enough fingers.

stay tuned.
Melda Carlucci
14.03.2011		Hi. I also have the Numark Mixmeister Controller and want to use with TS pro. Do you have a tsi file I can use? It would be greatly appreciated.
Ignacio Hoal
25.01.2011		I changed a lot. I will continue testing, a few buttons and knobs are not yet used.
I do not have too much time now, but maybe in the weekend will put a picture with a description and maybe I can attach a ready to go TSI.
Tyisha Towle
24.01.2011		gaidjin... how's it going?

I haven't had a chance to sit with the controller, but I'm planning on fine tuning the mapping toevening . I'm going to integrate the LED mappings you sent.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy