Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

TraktorPro2 Sample Deck Mapping for Korg Nano Kontrol (Decks 3 & 4)

Home :: Post and find Controller Mappings :: TraktorPro2 Sample Deck Mapping for Korg Nano Kontrol (Decks 3 & 4)Reply

TraktorPro2 Sample Deck Mapping for Korg Nano Kontrol (Decks 3 & 4) Posted on: 09.04.2011 by Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
09.04.2011	Originally Posted by blancodisco Thinking about this more... although it would be super duper nice to believe up of an awesome mapping for the VCI-100 to manage/control the 2 Sampler Decks (C+D) on the VCI-100, I'm beginning to change my thoughts here. It may make more sense to use a whole separate controller for the Sampler Decks on their own. I do wish to find a way on the VCI-100 device... once a loop is in play on Deck A or B to be able to pass it to one of the 8 samplers slot positions... from there, use that additional controller device/hardware to strictly control the sampler features. Sampler Controls: Play/Pause Loop/One Shot Filter FX Bank Selecte (1-4) Volume (1-4) Something like a Korg Nano Kontrol may work perfectly for the sampler functionality. Just trying to believe of practical solutions here. Focusing your thoughts of functionality on specific devices instead of the 1 device does all could make things a little easier, although setup may get a little more complicated. May try to wire something up soon and will share if I make any progress here. My Mapping is ready... http://blancodisco.com/downloads/Kor...raktorPro2.zip Original Blog post here: http://blancodisco.com/2011/04/09/tr...rol-decks-3-4/ I had to end up using two channels for a Sample Deck Slot in Traktor to get enough of the controls I wanted to tweak up font. That meant I required 2 Scenes for Deck 3 and then Deck 4. I suppose I could do some sort of lighter or basic mapping on Scene 4 as it is currently unused at the moment to fit both Sample Decks 3 and 4 . Sample Deck Controls. Scene 1 and 2 Control Sample Deck 3 and 4 Respectively. Channels 1 & 2 on the Korg Nano Kontrol affect Sample Slot 1, Channels 3 & 4, Sample Slot 2 Channels 5 & 6, Sample Slot 3 Channels 7 & 8, Sample Slot 4 Controls: Volume Filter Sweep Mute/Unmute Sample Start/Stop Loop/1 Shot Mode Loop Length Double Loop Length Half Loop Length Reset Channel 9, Loop Recorder Controls: Loop Length Dry/Wet Mix Start/Stop of Looper Record Loop On the Korg Nano Kontrol
23.04.2011	Thank You. Those are some good 'extra' ideas that take on some more 'global' like controls. Since we have the extra scene to play with, it doesn't hurt to try to fill it up. I'll do some believeing and see what I can come up with. bb
Jacalyn Birkenstock 23.04.2011	Great mapping! will be using it soon , maybe you can use scene 4 for things like beatgridding, browser, main and cue volume, fx bank selection; things that you don't move all the time. This kind of things aren't avaliable in many controllers so this can complement it.

<< Back to Post and find Controller Mappings Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Cambodia is:

TraktorPro2 Sample Deck Mapping for Korg Nano Kontrol (Decks 3 & 4)