Reply to [Dev] Unoffical Oxygen 25 Mapping (based on DJTT)

Starting a thread to get testers for the sysex file and controller mapping for the Oxygen 25v3 and TP 1.2.7.

I tried using pilmat's files, but I believe they don't work anymore. Either different TP versions or Oxygen version... I had issues with wrong values being sent and mapping not matching DJTT's... so I made my own SysEx file based on pilmat's... mainly adding the crossfader and correcting the values sent by the filter knobs so low/high match TP's movement/values. Echo freeze was also fixed.

On top of all that, I just finished creating the layout image for the Oxygen 25v3.

Instructions

1. Download MIDI-OX http://www.midiox.com/moxdown.htm
2. Plug in and turn on your Oxygen 25 and let the drivers install.
3. 1. Open MIDI-OX (make sure TP or any other MIDI capable application is closed)
   2. Make sure Oxygen 25 is both your MIDI input and output. (Options > MIDI Devices)
   3. Change the default output buffers for SysEx to 512 (Options > Configure Buffers)
   4. Open the SysEx console (View > SysEx)
   5. Send the SysEx to your Oxygen 25 (File > Send SysEx File)
   6. This will take approx 10 secs, your Oxygen 25 LED Panel will show "SYS".
   7. Once done, restart your Oxygen 25. (switch off/switch on)
4. Open TP and import the .tsi file.

Waiting to hear from y'all! I don't consider myself a DJ yet, so I can't really test this layout but I know the bindings work, if you have suggestions on how to improve the mapping, don't hesitate!

Note: Cannot attach .sysex files, so rename from .txt to .sysex.