Reply to How to assign APC40/20 LEDs

So basically I could never find a clear way to map the leds with my apc40. I spent about 3 hours plugging in numbers and looking at other apc40 tsi files. SO here's the skinny on how to map the leds.

First you assign the output for what ever pad you want.
Step one
Activate modifier M1 to setting number 0
Type of controller: LED
Interaction Mode: Output
Assignment: (Deck of choice)

Here is the important part:
Controller range: min=0 max=1, and check the invert box.
Midi Range:
For green: min=1 max=1 (check the blend box)
For Red : min=3 max=3 (blend box)
For amber: min=5 max= (blend box)
If you want the buttons to blink when you activate them you set the second number to the number below it (i.e. 1 becomes zero, 3 becomes 2 and 5 becomes 4)