Calvin Harris
and Dillon Francis
worked there... no way!
| Pioneer DDJ-SX Traktor Mapping Help Hey guys, ive been using the Pioneer DDJ-SX Viper mapping for a few weeks now. However, I i noticed early on the effects dont work as they should. I have the gater working and the beatmasher, but the delay (mapped to pad 1 ) doesnt work. It also seems some of the effects work and some dont. Does anyone have any idea why? Shift+Slicer opens a new bank of effects, flanger, lofi and zzzzrp works but delay and delay t3 dont. Does anyone have this mapping working correctly?
Also is there any documentation as to how Viper mapped each button so we can change it to suit ourselves?
Thank guys | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Kellie Myrum
27.01.2013 |
Originally Posted by viper9711
Delete all older mappings and import my file with the IMPORT button.
Isn't that IMPORT button overwrites all existing mappings? | Shakira Rodriguezcruz
26.01.2013 | Hey guys, ive been using the Pioneer DDJ-SX Viper mapping for a few weeks now. However, I i noticed early on the effects dont work as they should. I have the gater working and the beatmasher, but the delay (mapped to pad 1 ) doesnt work. It also seems some of the effects work and some dont. Does anyone have any idea why? Shift+Slicer opens a new bank of effects, flanger, lofi and zzzzrp works but delay and delay t3 dont. Does anyone have this mapping working correctly?
Also is there any documentation as to how Viper mapped each button so we can change it to suit ourselves?
Thank guys | Cherise Sleezer
08.02.2013 |
Originally Posted by dj wilki3
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Nichelle Jami
05.02.2013 |
Originally Posted by David Edge
Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks!
hi david, had the same problem with m led's using vipers tsi file, you might want to check if the midi is enabled on the unit as follows:
press shift and sync button on the left deck only at the same time , ( dont let go) turn the power on, as soon as it lights up press the key/tempo button ( under the vinyl mode button) if its lights up , it's midi enabled , switch the power off afterwards and its saved, run it again, it should work , i got mine working now,
@viper ist ne geile mapping , vielen dank f | Cherise Sleezer
02.02.2013 | Hi Viper, finally I tried your mapping, it works great and it is very stable and experience no audio clicks and drop-outs as compared to serato dj, because i am running on win7 64bit...the only problem i have is that the jogwheel LEDs in the middle, dont light up...it lights up when it acknowledges/responds to my selection of the in/out ports in the controller manager...what could be the problem? I assume that i am in the "other" mode because everything works fine except for my jogwheel LEDs...hope to hear from you bro, thanks! | Nichelle Jami
01.02.2013 | used your mapping viper , however the rotating led does not light up or even bunk/rotate any tips how i can make it work? vielen dank!!! | Donella Bentch
01.02.2013 | Yes, but you can save your old mappings separately step by step in the controller manager | Kellie Myrum
27.01.2013 |
Originally Posted by viper9711
Delete all older mappings and import my file with the IMPORT button.
Isn't that IMPORT button overwrites all existing mappings? | Donella Bentch
28.01.2013 | Delete all older mappings and import my file with the IMPORT button. ALL checkboxes have to be marked on. Only in this way your FX Presets be in the right order!
Greets
viper | Kellie Myrum
26.01.2013 | I'd make sure to contact author of the mapping before looking for help around town. |
|
