How many LED's do I need?
How many LED's do I need? Posted on: 29.04.2010 by Leeanna Ayla Looking at this articlehttp://www.djranking s.com/2009/08/3...-a-button-led/ Its says:
3mm LEDS-I bought mine from ebay ($6 for 100 leds) and you can choose how many of each color you want. I went with 40 x Blue, 40 x White, and 20 x Red
I'm going red, white, and blue and may have a trick or two up my sleeve for the modding . We'll see if any of my crazy ideas actually work though. | |
| Leeanna Ayla 29.04.2010 | Looking at this article http://www.djranking s.com/2009/08/3...-a-button-led/ Its says:
3mm LEDS-I bought mine from ebay ($6 for 100 leds) and you can choose how many of each color you want. I went with 40 x Blue, 40 x White, and 20 x Red
I'm going red, white, and blue and may have a trick or two up my sleeve for the modding . We'll see if any of my crazy ideas actually work though. |
| Lanny Vanosten 29.04.2010 | Try one led first and see it it works, since de-soldering leds on the board is very delicate work. Pulling the led if the solder on both legs are not hot enough (or too hot) may cause the printed circuit board (or track I call it) to come off. This will affect other leds on the board since they all share the same voltage side. Also, Vestax used leds with very thin legs. Leds that you buy elsewhere have thicker lags and don't fit in the board's smaller diameter ones. I had to fix 'a few tracks myself and ended up modding only the headphone leds and the scratch leds. It took way too much time for me anyway.. Good luck! |
| Dorcas Bassignani 29.04.2010 | there's 2 per button, ish some only have 1, but if you double up you're all good |
<< Back to Reviews of DJ equipment Reply