Problems with VCI100 and DJTT mapping

Home :: Reviews of DJ equipment :: Problems with VCI100 and DJTT mappingReply
Problems with VCI100 and DJTT mapping
Posted on: 03.04.2011 by Jc Laky
ok so i bought a vestax vci 100 a couple weeks ago and decided to try out the DJTT mapping with traktor pro demo, it worked pretty solid but i encoutered a number of problems D: . I believe I have Firmware 1.2 but im not sure. So anyways my first problem is My Fourth effect Button (rightside next to temp slider under rotary effect parameter knob) doesnt activate the third effect in the FX bank and instead somtimes activiates the cue headphone button and just a few minutes ago i was playing with the vestax and when i pushed it and made my entire vestax's LED's start flashing oddly and stop responding sort of. And I just booted up traktor demo again and now when i hit the button again it toggles up and down the 'PAT' on the dedicated slicer's FX section .Also when i activated my sampler (on the DJTT mapping) and started to try and record my cue point juggle, the recorded loop would decrease in tempo greatly and then increase greatly (120bmp - 180bmp), even though i didnt touch it.

any ideas on whats happening? its a new vestax bought from amazon, im not too keen on buying the firmware upgrade from Djtt is there any way to fix this problem???
Help D:
Somer Vanstraten
04.04.2011
Originally Posted by fullenglishpint
That's what she said.

OHHHHH!!!!!!!!!! you got burned
ahah i can't understand English, feeling so f******n retarded right now
Tatum Ansaldo
04.04.2011
Originally Posted by CionniAsDj
what he said.
second time.
That's what she said.

OHHHHH!!!!!!!!!! you got burned
Somer Vanstraten
04.04.2011
Originally Posted by fullenglishpint
what he said.

And the other weird behaviour is most likely because you haven't selected the VCI in the IN/OUT port settings in controller manager. If it's set to all ports, crazy shit can happen.
what he said.
second time.
Somer Vanstraten
04.04.2011
Originally Posted by smoez
ok so i bought a vestax vci 100 a couple weeks ago and decided to try out the DJTT mapping with traktor pro demo, it worked pretty solid but i encoutered a number of problems D: . I believe I have Firmware 1.2 but im not sure. So anyways my first problem is My Fourth effect Button (rightside next to temp slider under rotary effect parameter knob) doesnt activate the third effect in the FX bank and instead somtimes activiates the cue headphone button and just a few minutes ago i was playing with the vestax and when i pushed it and made my entire vestax's LED's start flashing oddly and stop responding sort of. And I just booted up traktor demo again and now when i hit the button again it toggles up and down the 'PAT' on the dedicated slicer's FX section .Also when i activated my sampler (on the DJTT mapping) and started to try and record my cue point juggle, the recorded loop would decrease in tempo greatly and then increase greatly (120bmp - 180bmp), even though i didnt touch it.

any ideas on whats happening? its a new vestax bought from amazon, im not too keen on buying the firmware upgrade from Djtt is there any way to fix this problem???
Help D:
weel know bug of the 1.2 firmware on the 4 button.
an upgrade will solve it
Jc Laky
03.04.2011		ok so i bought a vestax vci 100 a couple weeks ago and decided to try out the DJTT mapping with traktor pro demo, it worked pretty solid but i encoutered a number of problems D: . I believe I have Firmware 1.2 but im not sure. So anyways my first problem is My Fourth effect Button (rightside next to temp slider under rotary effect parameter knob) doesnt activate the third effect in the FX bank and instead somtimes activiates the cue headphone button and just a few minutes ago i was playing with the vestax and when i pushed it and made my entire vestax's LED's start flashing oddly and stop responding sort of. And I just booted up traktor demo again and now when i hit the button again it toggles up and down the 'PAT' on the dedicated slicer's FX section .Also when i activated my sampler (on the DJTT mapping) and started to try and record my cue point juggle, the recorded loop would decrease in tempo greatly and then increase greatly (120bmp - 180bmp), even though i didnt touch it.

any ideas on whats happening? its a new vestax bought from amazon, im not too keen on buying the firmware upgrade from Djtt is there any way to fix this problem???
Help D:
Roberto Viccione
04.04.2011		It'll still be screwy. You're using FW1.2 at best, and that has all sorts of issues with the SE mapping (bass knobs not sending the filter signals, one of the sync buttons not toggling as you'd believe it should, etc. etc.)
Jc Laky
04.04.2011		Oh ok i believe it was set to all ports ill try it later thanks !
Somer Vanstraten
04.04.2011
Originally Posted by fullenglishpint
That's what she said.

OHHHHH!!!!!!!!!! you got burned
ahah i can't understand English, feeling so f******n retarded right now
Tatum Ansaldo
04.04.2011
Originally Posted by CionniAsDj
what he said.
second time.
That's what she said.

OHHHHH!!!!!!!!!! you got burned
Somer Vanstraten
04.04.2011
Originally Posted by fullenglishpint
what he said.

And the other weird behaviour is most likely because you haven't selected the VCI in the IN/OUT port settings in controller manager. If it's set to all ports, crazy shit can happen.
what he said.
second time.
Tatum Ansaldo
04.04.2011		what he said.

And the other weird behaviour is most likely because you haven't selected the VCI in the IN/OUT port settings in controller manager. If it's set to all ports, crazy shit can happen.
Somer Vanstraten
04.04.2011
Originally Posted by smoez
ok so i bought a vestax vci 100 a couple weeks ago and decided to try out the DJTT mapping with traktor pro demo, it worked pretty solid but i encoutered a number of problems D: . I believe I have Firmware 1.2 but im not sure. So anyways my first problem is My Fourth effect Button (rightside next to temp slider under rotary effect parameter knob) doesnt activate the third effect in the FX bank and instead somtimes activiates the cue headphone button and just a few minutes ago i was playing with the vestax and when i pushed it and made my entire vestax's LED's start flashing oddly and stop responding sort of. And I just booted up traktor demo again and now when i hit the button again it toggles up and down the 'PAT' on the dedicated slicer's FX section .Also when i activated my sampler (on the DJTT mapping) and started to try and record my cue point juggle, the recorded loop would decrease in tempo greatly and then increase greatly (120bmp - 180bmp), even though i didnt touch it.

any ideas on whats happening? its a new vestax bought from amazon, im not too keen on buying the firmware upgrade from Djtt is there any way to fix this problem???
Help D:
weel know bug of the 1.2 firmware on the 4 button.
an upgrade will solve it

<< Back to Reviews of DJ equipment Reply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy