Modding X1 Knobs etc
Modding X1 Knobs etc Posted on: 31.03.2011 by Brock Ricapito I've scoured the community
s for as much info as possible but i wanted to ask some questions that would help me find solid answers.I would like to modify my Kontrol X1s in a manner similar to this big props to Deejaysoul for that, since I am ripping that picture from another thread. Anyway, I am under the impression the knob shaft of the X1 is 6.3mm or 1/4th" but I haven't been able to find confirmation on that, but if I am not mistaken the knobs are D-shaped. Now, I treat my controllers very carefully, and am a bit nervous about just yanking the knobs off the controller. How does one go about properly modifying the knobs without screwing anything up? Also, do the different knobs on the X1 have different shaft sizes? I would be extremely grateful for guidance and general tips. | |
| Liza Lamonde 10.04.2011 |
Originally Posted by hurundi
what a bummer, the knobs would have looked great. now i have to start another search through the internet to find a good alternative. edit: got the item today. still not the best seller as he din't responce to any messaged but at least sends the product. knobs don't fit that well but i could make it work with a little tweaking. |
| Caitlyn Scarantino 04.04.2011 |
Originally Posted by ajrindy
|
| Leeanna Ayla 31.03.2011 |
Originally Posted by Jason Cerna
|
| Orlando Stadnick 31.03.2011 |
Originally Posted by ajrindy
|
| Brock Ricapito 31.03.2011 |
Originally Posted by Jason Cerna
are the S4 and X1 knob shafts the same size? are the knob shafts of the FX/EQ knobs the same as the looping knobs? I'm guessing the answer is yes and yes, but It would be great to have confirmation. Also, can anyone recommend some places to purchase cool knobs? I have found places on ebay, but I would be happy to have more sources. thanks a bunch for the responses guys. |
| Brock Ricapito 31.03.2011 | I've scoured the community
s for as much info as possible but i wanted to ask some questions that would help me find solid answers. I would like to modify my Kontrol X1s in a manner similar to this big props to Deejaysoul for that, since I am ripping that picture from another thread. Anyway, I am under the impression the knob shaft of the X1 is 6.3mm or 1/4th" but I haven't been able to find confirmation on that, but if I am not mistaken the knobs are D-shaped. Now, I treat my controllers very carefully, and am a bit nervous about just yanking the knobs off the controller. How does one go about properly modifying the knobs without screwing anything up? Also, do the different knobs on the X1 have different shaft sizes? I would be extremely grateful for guidance and general tips. |
| Liza Lamonde 10.04.2011 |
Originally Posted by hurundi
what a bummer, the knobs would have looked great. now i have to start another search through the internet to find a good alternative. edit: got the item today. still not the best seller as he din't responce to any messaged but at least sends the product. knobs don't fit that well but i could make it work with a little tweaking. |
| Danae Dumler 05.04.2011 | Knob heaven for me is mammoth electronics: http://www.mammothelectronics.com/category-s/25.htm I replaced some of my VCI knobs with their black aluminum numbers, very sweet chunky feel to them. But honestly I don't see the point of replacing the knobs on the X1 or the S4 -- the rubberized ones these machines come with are REALLY nice. I've tried both the Radio Shack knobs on the S4 pictured and just as far as the feel of the knob, I feel like it would be a downgrade (particularly for the little ones). Though I do prefer fatter knobs in general, so there is room for improvement. Custom knobs like those McIntosh ones are another more high-end way to go though more expensive of course... |
| Brock Ricapito 05.04.2011 | many many kudos and thank you deejaysoul! It was originally your mod, so who could better advise me than you yourself? Thanks a lot. |
| Caitlyn Scarantino 04.04.2011 |
Originally Posted by ajrindy
|
| Brock Ricapito 04.04.2011 | after a while being away from here and not looking at modding, I looked around again this afternoon and have been unable to find as many good knobs as I wanted... can anyone clue me in on some good sites to shop for knobs? I have a couple, but not exactly the ones that I would like. thanks guys |
| Leeanna Ayla 31.03.2011 |
Originally Posted by Jason Cerna
|
| Orlando Stadnick 31.03.2011 |
Originally Posted by ajrindy
|
| Brock Ricapito 31.03.2011 |
Originally Posted by Jason Cerna
are the S4 and X1 knob shafts the same size? are the knob shafts of the FX/EQ knobs the same as the looping knobs? I'm guessing the answer is yes and yes, but It would be great to have confirmation. Also, can anyone recommend some places to purchase cool knobs? I have found places on ebay, but I would be happy to have more sources. thanks a bunch for the responses guys. |
| Liza Lamonde 31.03.2011 | i bought a pair of these knobs to replace two rotarys on my x1 http://cgi.ebay.com/ws/eBayISAPI.dll...AQ%3AUS%3A1123. they should fit (d-shaft) but i could'nt try it as i haven't received them yet (waiting for 3 weeks now). i'll let you know once they arrive. |
| Harley Hendzel 31.03.2011 | I replaced the majority of knobs on my s4 in January. The exact size is 6mm d/flatted shaft. You can also pickup knobs that don't fit that shaft if the knob you are getting has a setscrew to secure the knob on the pot shaft. |
| Leeanna Ayla 31.03.2011 | That's pretty pimp looking. I believe they're 6.3, but I'm not 100% on that either. |
| Orlando Stadnick 31.03.2011 | They're all D-shaped and with the same shaft size. It's just that I'm not sure if they're 6mm or 6.3mm, someone would better confirm you first. I changed mine but can't remember if they're 6 or 6.3mm. For taking off the knob, don't be affraid : 2 fingers, hold tight & pull them off The pot himself is "fixed in the X1", you just can't take anything else apart the knob doing this. |
<< Back to Reviews of DJ equipment Reply