Top genres

Top 7 of 21 genres

Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

Top countries

Top 7 of 108 countries

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

The best DJ in Belarus is:

TROCKENSAFT

Who is the best DJ in Maldives?
Click to find out

Calvin Harris
and Dillon Francis
worked there... no way!

Ableton Mixer - Possible Build, Need input!

Home :: Reviews of DJ equipment :: Ableton Mixer - Possible Build, Need input!Reply

Ableton Mixer - Possible Build, Need input! Posted on: 15.04.2011 by Jammie Cromar Currently my set-up consists of a launchpad and an MPD 26. After using my friends APC40 I began to crave the extra control it offered. I started wishing akai sold just the knobs and cross fader section of the APC40(pretty much just what you dont get if you get the APC20). Seeing as they dont make this I began to ponder how I could make this myself. I have always loved diy, tinkering, modding etc. so it seemed like it could be a fun project. There is a chance this build is too far above my ability but I would at least like to get some input on my design and how to go about building it. This is what I drew up today [ame]http://i196.photobucket.com/albums/aa259/airsoft0866/diycontroller.png[/ame] I dont know why the link is showing up like this, its not a video but if you click the blue link it opens the image in a new window. Track Control - Everything that is labeled is pretty self explanatory - The green arrows and large gray nob are for scrolling through and select tracks, I thought it might be nice to be able to scroll through with a knob or buttons depending on how many tracks you have(knob being faster than a fader if you have a lot of them) Device Control -Knobs 1-8 would control the parameters of the selected device like you can on the APC40 -On/Off button turns the selected device on or off -Two black arrow button would shift what the knobs are controller over a spot. For example say the device has 10 parameters, pressing the right arrow would allow knob 4 and 8 to be controlling the extra 2 parameters.(Im not sure if this even possible....and I hope that explanation made sense) -Button 1 and 2 would just be free to assign to any parameter(I had the beat repeat on/off button in mind when adding these, or turning filters on/off. Something along those lines) -The green arrow buttons and the large grey knob would act the same way as they would in track control. It would just allow you to scroll through and select different devices. Other -Grey Square would be an X/Y touch pad for controlling effects -Cross fader to control the cross fader in ableton Im not worried about the build itself as much as I am worried about getting it to work properly. There are some functions that I would like to have that are not midi assignable and specific to the APC40. The ability to scroll between tracks/devices for example. That is not something that can just be assigned via midi. Im hoping I can use the remote script from the APC40 to help me with things like that but I have very limited programming experience. Anyways let me know what you believe....
Jammie Cromar 26.04.2011	Originally Posted by djsakebomb Not possible, unless you mean just to scroll through the scenes in your set. You can't scroll through the browser windows. I mean when you have a project open, you can use the arrow keys on your keyboard to scroll between which track is selected. I was hoping I could come up with a way to do that without having to use the computer keyboard. It would be nice to be able to do it right on the controller Originally Posted by djsakebomb Effects racks only have 8 macro knobs, so you can't control 10 parameters without doubling up some on a knob, which then makes the arrow buttons pointless. On the APC40, the left and right buttons switch between devices, rather than opening up additional macro knobs. Yeah I had a feeling I would be able to do that... Originally Posted by djsakebomb If you don't have very much programming knowledge, it will be very difficult to accomplish the non-MIDI-assignable portions of the project. [/quote] Seeing as the main non-midi assignable things I want to have are available on the APC 40 I was hoping I could just modify the default remote script or whatever to make those function work with a diy controller. I understand the basics and concepts of programming(java and c++ at least) im just not very good at writing things from scratch. And my father is a software engineer so I might be able to convince him to gimme some help
Ling Zambada 17.04.2011	Originally Posted by Mike MPD Track Control - The green arrows and large gray nob are for scrolling through and select tracks, I thought it might be nice to be able to scroll through with a knob or buttons depending on how many tracks you have(knob being faster than a fader if you have a lot of them) Not possible, unless you mean just to scroll through the scenes in your set. You can't scroll through the browser windows. Originally Posted by Mike MPD Device Control -Two black arrow button would shift what the knobs are controller over a spot. For example say the device has 10 parameters, pressing the right arrow would allow knob 4 and 8 to be controlling the extra 2 parameters.(Im not sure if this even possible....and I hope that explanation made sense) -The green arrow buttons and the large grey knob would act the same way as they would in track control. It would just allow you to scroll through and select different devices. Effects racks only have 8 macro knobs, so you can't control 10 parameters without doubling up some on a knob, which then makes the arrow buttons pointless. On the APC40, the left and right buttons switch between devices, rather than opening up additional macro knobs. Originally Posted by Mike MPD Im not worried about the build itself as much as I am worried about getting it to work properly. There are some functions that I would like to have that are not midi assignable and specific to the APC40. The ability to scroll between tracks/devices for example. That is not something that can just be assigned via midi. Im hoping I can use the remote script from the APC40 to help me with things like that but I have very limited programming experience. If you don't have very much programming knowledge, it will be very difficult to accomplish the non-MIDI-assignable portions of the project.
Jammie Cromar 15.04.2011	Currently my set-up consists of a launchpad and an MPD 26. After using my friends APC40 I began to crave the extra control it offered. I started wishing akai sold just the knobs and cross fader section of the APC40(pretty much just what you dont get if you get the APC20). Seeing as they dont make this I began to ponder how I could make this myself. I have always loved diy, tinkering, modding etc. so it seemed like it could be a fun project. There is a chance this build is too far above my ability but I would at least like to get some input on my design and how to go about building it. This is what I drew up today [ame]http://i196.photobucket.com/albums/aa259/airsoft0866/diycontroller.png[/ame] I dont know why the link is showing up like this, its not a video but if you click the blue link it opens the image in a new window. Track Control - Everything that is labeled is pretty self explanatory - The green arrows and large gray nob are for scrolling through and select tracks, I thought it might be nice to be able to scroll through with a knob or buttons depending on how many tracks you have(knob being faster than a fader if you have a lot of them) Device Control -Knobs 1-8 would control the parameters of the selected device like you can on the APC40 -On/Off button turns the selected device on or off -Two black arrow button would shift what the knobs are controller over a spot. For example say the device has 10 parameters, pressing the right arrow would allow knob 4 and 8 to be controlling the extra 2 parameters.(Im not sure if this even possible....and I hope that explanation made sense) -Button 1 and 2 would just be free to assign to any parameter(I had the beat repeat on/off button in mind when adding these, or turning filters on/off. Something along those lines) -The green arrow buttons and the large grey knob would act the same way as they would in track control. It would just allow you to scroll through and select different devices. Other -Grey Square would be an X/Y touch pad for controlling effects -Cross fader to control the cross fader in ableton Im not worried about the build itself as much as I am worried about getting it to work properly. There are some functions that I would like to have that are not midi assignable and specific to the APC40. The ability to scroll between tracks/devices for example. That is not something that can just be assigned via midi. Im hoping I can use the remote script from the APC40 to help me with things like that but I have very limited programming experience. Anyways let me know what you believe....
Jammie Cromar 26.04.2011	Originally Posted by djsakebomb Not possible, unless you mean just to scroll through the scenes in your set. You can't scroll through the browser windows. I mean when you have a project open, you can use the arrow keys on your keyboard to scroll between which track is selected. I was hoping I could come up with a way to do that without having to use the computer keyboard. It would be nice to be able to do it right on the controller Originally Posted by djsakebomb Effects racks only have 8 macro knobs, so you can't control 10 parameters without doubling up some on a knob, which then makes the arrow buttons pointless. On the APC40, the left and right buttons switch between devices, rather than opening up additional macro knobs. Yeah I had a feeling I would be able to do that... Originally Posted by djsakebomb If you don't have very much programming knowledge, it will be very difficult to accomplish the non-MIDI-assignable portions of the project. [/quote] Seeing as the main non-midi assignable things I want to have are available on the APC 40 I was hoping I could just modify the default remote script or whatever to make those function work with a diy controller. I understand the basics and concepts of programming(java and c++ at least) im just not very good at writing things from scratch. And my father is a software engineer so I might be able to convince him to gimme some help
Ling Zambada 17.04.2011	Originally Posted by Mike MPD Track Control - The green arrows and large gray nob are for scrolling through and select tracks, I thought it might be nice to be able to scroll through with a knob or buttons depending on how many tracks you have(knob being faster than a fader if you have a lot of them) Not possible, unless you mean just to scroll through the scenes in your set. You can't scroll through the browser windows. Originally Posted by Mike MPD Device Control -Two black arrow button would shift what the knobs are controller over a spot. For example say the device has 10 parameters, pressing the right arrow would allow knob 4 and 8 to be controlling the extra 2 parameters.(Im not sure if this even possible....and I hope that explanation made sense) -The green arrow buttons and the large grey knob would act the same way as they would in track control. It would just allow you to scroll through and select different devices. Effects racks only have 8 macro knobs, so you can't control 10 parameters without doubling up some on a knob, which then makes the arrow buttons pointless. On the APC40, the left and right buttons switch between devices, rather than opening up additional macro knobs. Originally Posted by Mike MPD Im not worried about the build itself as much as I am worried about getting it to work properly. There are some functions that I would like to have that are not midi assignable and specific to the APC40. The ability to scroll between tracks/devices for example. That is not something that can just be assigned via midi. Im hoping I can use the remote script from the APC40 to help me with things like that but I have very limited programming experience. If you don't have very much programming knowledge, it will be very difficult to accomplish the non-MIDI-assignable portions of the project.
Jammie Cromar 16.04.2011	http://www.djranking s.com/2008/02/0...ch-pad-for-25/
Maryanne Weatherill 17.04.2011	Your going to find it very hard to build and map an xy pad.
Jammie Cromar 15.04.2011	... not what Im looking for
Cammy Clegg 15.04.2011	... xone 1d
Jammie Cromar 15.04.2011	A little soon for an update haha but im believeing instead of the left and right arrow buttons in device control to scroll between the parameters, Bank buttons might be more feasible. Just have bank A and bank B instead of Left and Right so 8 knobs with 16 total controls.
Brock Ricapito 15.04.2011	I dont have any input about how feasible this is, so this isn't a useful post, but that's an AWESOME idea.

<< Back to Reviews of DJ equipment Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy