How to make for 19" connection panel!
How to make for 19" connection panel! Posted on: 19.05.2011 by Tory Houp PART ONE: The BasicsIn this guide I'll try to guide the inexperienced solder through the making of a connection panel for your dj-setup. All links for shops will be to Thomann.de, they ship to most of Europe. If you're in the US, try to google the product number. Why would you want to make a connection panel? Well first of all it looks good and professional, and second it makes setting up at your gig so much easier. Where can i use it? The connections panel I've used is a 19" rack standard. That means it will also fit in any 19" amp racks. My flightcase came with a 19" 1 unit slot, for this exact purpose. What do I need? A standard 19" connection plate comes with 12 holes in D size. You can get the with fewer. You can mix how the connecters how you want, but ill write this guide to the exact panel i made. For that you need: 1x 19" connection panel (http://goo.gl/Sv4fU) 2x XLR sockets, male (http://goo.gl/UBwFo) - Main out 2x XLR sockets, female (http://goo.gl/ok9oe) - MIC inputs 2x Standard XLR cables, male-female (http://goo.gl/LSdWK) 2x RCA sockets, red, female (http://goo.gl/ugBUI) - Extra channels in/out 2x RCA sockets, white, female (http://goo.gl/kjwQ5) - Extra channels in/out 1x Standard RCA cable, male-male (http://goo.gl/vpHjN) - Extra channels in/out 2x USB sockets (http://goo.gl/H2IBx) - USB in/out for soundcard, MIDI, etc. 1x PowerCon socket, in (http://goo.gl/xxJDY) - Power in 1x PowerCon plug, in (http://goo.gl/marXT) - Power in 2x Standard power plug (whatever is used in your country) - Power in 1x Standard extension cord (whatever is used in your country, but something like this: http://goo.gl/vC2D3) - Power in 1x PowerCon socket, out (http://goo.gl/S6QmH) - Power out 1x PowerCon plug, out (http://goo.gl/JV3fO) - Power out 1x Standard (single) power socket (whatever is used in your country) - Power out 1x Standard household extentioncord - Power in/out Solder Soldering iron Tape or strips A couple of hours Well, that was a lot of information. But its not that difficult, let me break it down with a picture. Connection panel (from left to right)
But what about all the extension cords and cables? Well, you're going to fabricate your own cables for power in and power out. This (proberly) won't demand any soldering. Its pretty easy, just remove the isolation and disassemble the plugs and sockets and mount the cords. The sockets have illustrated where positive, negative and ground goes. Code:
<Standard Plug>--------CORD-------<PowerCon In Plug> <PowerCon Out Plug>---------CORD-------<Standard (single) Socket> In the top left of this picture, you'll see the 'power-area' of my flightcase. The 2 first sockets is for power in/out. Lets start with the power, and all the audio will be explained later on. Code:
<PowerCon In Socket>-----EXTENSION CORD-<Socket><Socket><Socket><Socket> <PowerCon Out Socket>-----CORD-----<Standard Plug> Lets carrie on to the MIC sockets. My mixer supports 2 mics, therefore there is 2 MIC socket. These 2 socket are identical. The cables will look like this: Code:
<XLR Female Socket>-----XLR Cable-----<XLR Male Plug> The next 4 socket are RCA for extra sound in or out. They are all identical, but for the ease use the same colors on the cable to the same color in the socket. The cable will look like this: Code:
<RCA Female Socket>----RCA Cable-----<RCA Plug Male> Code:
<XLR Male Socket>-----XLR Cable-----<XLR Plug Female Plug> Please feel free to come with feedback, questions or spelling corrections. | |
| Tory Houp 19.05.2011 |
Originally Posted by Buffalo Ill
|
| Tory Houp 19.05.2011 | PART ONE: The Basics In this guide I'll try to guide the inexperienced solder through the making of a connection panel for your dj-setup. All links for shops will be to Thomann.de, they ship to most of Europe. If you're in the US, try to google the product number. Why would you want to make a connection panel? Well first of all it looks good and professional, and second it makes setting up at your gig so much easier. Where can i use it? The connections panel I've used is a 19" rack standard. That means it will also fit in any 19" amp racks. My flightcase came with a 19" 1 unit slot, for this exact purpose. What do I need? A standard 19" connection plate comes with 12 holes in D size. You can get the with fewer. You can mix how the connecters how you want, but ill write this guide to the exact panel i made. For that you need: 1x 19" connection panel (http://goo.gl/Sv4fU) 2x XLR sockets, male (http://goo.gl/UBwFo) - Main out 2x XLR sockets, female (http://goo.gl/ok9oe) - MIC inputs 2x Standard XLR cables, male-female (http://goo.gl/LSdWK) 2x RCA sockets, red, female (http://goo.gl/ugBUI) - Extra channels in/out 2x RCA sockets, white, female (http://goo.gl/kjwQ5) - Extra channels in/out 1x Standard RCA cable, male-male (http://goo.gl/vpHjN) - Extra channels in/out 2x USB sockets (http://goo.gl/H2IBx) - USB in/out for soundcard, MIDI, etc. 1x PowerCon socket, in (http://goo.gl/xxJDY) - Power in 1x PowerCon plug, in (http://goo.gl/marXT) - Power in 2x Standard power plug (whatever is used in your country) - Power in 1x Standard extension cord (whatever is used in your country, but something like this: http://goo.gl/vC2D3) - Power in 1x PowerCon socket, out (http://goo.gl/S6QmH) - Power out 1x PowerCon plug, out (http://goo.gl/JV3fO) - Power out 1x Standard (single) power socket (whatever is used in your country) - Power out 1x Standard household extentioncord - Power in/out Solder Soldering iron Tape or strips A couple of hours Well, that was a lot of information. But its not that difficult, let me break it down with a picture. Connection panel (from left to right)
But what about all the extension cords and cables? Well, you're going to fabricate your own cables for power in and power out. This (proberly) won't demand any soldering. Its pretty easy, just remove the isolation and disassemble the plugs and sockets and mount the cords. The sockets have illustrated where positive, negative and ground goes. Code:
<Standard Plug>--------CORD-------<PowerCon In Plug> <PowerCon Out Plug>---------CORD-------<Standard (single) Socket> In the top left of this picture, you'll see the 'power-area' of my flightcase. The 2 first sockets is for power in/out. Lets start with the power, and all the audio will be explained later on. Code:
<PowerCon In Socket>-----EXTENSION CORD-<Socket><Socket><Socket><Socket> <PowerCon Out Socket>-----CORD-----<Standard Plug> Lets carrie on to the MIC sockets. My mixer supports 2 mics, therefore there is 2 MIC socket. These 2 socket are identical. The cables will look like this: Code:
<XLR Female Socket>-----XLR Cable-----<XLR Male Plug> The next 4 socket are RCA for extra sound in or out. They are all identical, but for the ease use the same colors on the cable to the same color in the socket. The cable will look like this: Code:
<RCA Female Socket>----RCA Cable-----<RCA Plug Male> Code:
<XLR Male Socket>-----XLR Cable-----<XLR Plug Female Plug> Please feel free to come with feedback, questions or spelling corrections. |
| Lewis Stumpf 20.05.2011 | Damn man, you work fast! Good work, it looks like (I should really get my ass together and read it through, instead of just skimming it, shouldn't I?) |
| Tory Houp 19.05.2011 | Thanks alot! I'm glad you find it useful! PART THREE is still coming up, about the installation and mounting! |
| Joan Kollmorgen 19.05.2011 | Nice tutorial and very detailed - thanks |
| Tory Houp 19.05.2011 | PART TWO: The Soldering Now for the fun part, the soldering. Make sure to have your solder, a nice hot soldering iron and a good place to work (i made mine at my coffee table, and it made it all a bit harder). The solderings is the crucial part. There's not much to fuck up in the soldering of the power sockets, but if you do a bad or 'cold' soldering of the audio cables, it will result in static noise. With that in mind, it's important to make sure that the different metal parts of the socket isn't soldered together. But don't worry, you will soon enough see how your soldering skills are. The Power Sockets Both PowerCon sockets are made of plastic, so make sure you don't melt it with the soldering iron. There are 3 connectors in the PowerCon sockets: postive (+), negative (-) and ground (the symbol is a upside down T). In most european countries isn't any differens between positive and negativ. In the US there is a difference. It dosen't matter which wire in the cord you use, as long as its the same wire for positive in both ends, and same wire for negative in both ends (FOR US ONLY). Its important that the ground wire is the same in both ends (ALL REGIONS). If your cord only has 2 wires inside its positive and negative (not ground). Make sure to solder the end of every wire, before soldering them to the socket. IMPORTANT: Put the cord from your Power In through one of the holes in your panel and the cord from your Power Out though another hole! You won't be able to get them through after the soldering. It's recommended to use a cord with ground (I'm not too familiar with the US power grid, and how common ground is 'over there'). The XLR Sockets (MIC & Main Out) Now for the audio part, and this is where it gets more tricky. For starters a little disclaimer: My guide is based on that your Mic input is a XLR socket. Some mixers and controllers use a balanced jack for Mic input. I'll cover this briefly at last. Speaker cable (XLR): MIC cable - Balanced (XLR): Theres no difference in soldering MIC cables and speaker cables, this is just to illustrate the signal going through the pins in the XLR. So make sure that PIN1 is connected to PIN1, PIN2 is connected to PIN2 and PIN3 i connected to PIN3. As you can read in PART ONE, maybe you already bought 2 standard XLR cables. Now take both of them and cut them in half on the middle. You could make you own XLR cable, just as the power cables, but this is much easier. Now take the ends with the female plug and remove the first layer of isolation. Now solder the end of every wire, before soldering them to the socket. Inside the cable is 4 wires. 1 postive, 1 negative, 1 ground and 1 for the casing. When you look at the back of the socket, you'll see 4 connectors. At the plug in the one end of the cable, you see the numbers 1,2 and 3 to the respective pins. Open the plug (GENTLE) and se which wires goes to which pin, and now solder the respective wires to the respective connectors on the socket (you'll see the numbers right next to the connectors). Make sure the soldering is made properly and it don't fall of when you move the cable around (GENTLE, don't pull). Now repeat this for both the Mic XLR and the Main Out XLR. If your mixer/controller got a jack input for Mic, just get a Jack stereo-Jack stereo cable, and do it the same way. Use this picture to guide you to which wires goes where. The USB Sockets No soldering here! Weeee ^_^! Just flip the socket the way you want it. The RCA Sockets (Additional In/Out) The soldering of the RCA cables is much easier than the XLR cable. I couldn't find a illustration for a RCA plug, but it's exactly the same as a regular jack cable. Now take the RCA and pull the stereo cable from each other! Now you have 2 mono RCA cables. Now cut these 2 cable on the middle, and remove some of the first layer of isolation. Now you'll see a bunch of cobber strings, pull them to the side and twist and solder them together. The cobber strings (the ground) was hiding another layer of isolation. Remove the isolation, and twist and solder the cobber string that appears now (the signal). The outer cobber goes to the outer connecter on the socket, and the middle cobber goes to the center connector on the socket. Repeat this 3 more times. If you done everything right you should now have: Code:
1x <Standard Plug>--------CORD-------<PowerCon In Plug> 1x <PowerCon Out Plug>---------CORD-------<Standard (single) Socket> 1x <PowerCon In Socket>-----EXTENSION CORD-<Socket><Socket><Socket><Socket> (Through a hole in the 19" panel) 1x <PowerCon Out Socket>-----CORD-----<Standard Plug> (Through a hole in the 19" panel) 2x <XLR Female Socket>-----XLR Cable-----<XLR Male Plug> 2x <XLR Male Socket>-----XLR Cable-----<XLR Plug Female Plug> 2x <RCA Female Socket, Red>----RCA Cable-----<RCA Plug Male, Red> 2x <RCA Female Socket, White>----RCA Cable-----<RCA Plug Male, White> 2 USB Sockets Please feel free to come with feedback, questions or spelling corrections. |
| Tory Houp 19.05.2011 |
Originally Posted by Buffalo Ill
|
| Antoine Wasiewicz 19.05.2011 | You are one fast worker!!! |
<< Back to Reviews of DJ equipment Reply