Dj tech mix 101
Dj tech mix 101 Posted on: 13.02.2012 by Latesha Wolfenberger hi what it is have got a dj tech mix 101 and i cant seem to get the midi controller working on the software deckadance non of the main light light up for example play , cue and the deck selector any help would be much appreciated thanks | |
| Shonda Soulier 05.03.2012 |
Originally Posted by Jester.NZ
I'm happy to be the example of a poor commenter too. All you n00bs out there, this kinda crap doesn't fly here! |
| Latoria Kavulich 03.03.2012 |
Originally Posted by ToOntown
|
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
|
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
was only a thought - as i know i can select the midi channel that my djm101 uses. it's set on mine via a small selector on the side. i have mine set to minimum which is midi channel one. i presume your controller uses channels 1 thru 4 in that case whereas if u had it set to 2 then it would use channels 2 thru 5 etc... |
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
not sure if its for tp2 or not but most of the controls open in xtreme mapping ok. do the controls work as expected and just not the led feedback? i see a lot of OUT's in the mapping as well as IN's. the doc says you can configure the midi channels on the device but they'll need to be set to default i presume for the mapping to work. the mapping seems to use midi channel 1 for decks A+B and channel 2 for C+D. there's also just a few controls using channels 3+4. if the IN's are working with that tsi tho then the OUT's should be too, unless there's some issue with your actual controller. |
| Chasidy Heckenbach 20.02.2012 |
Originally Posted by rothwell90
i have the dj tech djm101 and i actually quite like it... it only has 2 led's tho that use midi notes 80 and 81 on midi channel 1 to make them light up. |
| Shonda Soulier 16.02.2012 |
Originally Posted by deevey
DJ Tech have become a major player and their gear has gotten more reliable, not to mention their CS. Hit them up... If it's under warranty you should be fine. |
| Shonda Soulier 15.02.2012 |
Originally Posted by deevey
I owned that controller for about 2 months when it first came out I thought it would be good to have for impromptu mixing at house parties--it does travel well cuz it's so small. It crapped out on me every time I used it. Buttons wouldn't work, LEDs stopped working... I didn't try it in Deckadance though...only Traktor. |
| Latesha Wolfenberger 13.02.2012 | hi what it is have got a dj tech mix 101 and i cant seem to get the midi controller working on the software deckadance non of the main light light up for example play , cue and the deck selector any help would be much appreciated thanks |
| Shonda Soulier 05.03.2012 |
Originally Posted by Jester.NZ
I'm happy to be the example of a poor commenter too. All you n00bs out there, this kinda crap doesn't fly here! |
| Latoria Kavulich 03.03.2012 |
Originally Posted by ToOntown
|
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
|
| Latesha Wolfenberger 03.03.2012 | tanks for all your help i have fixed it with a litle of your guidence thank you |
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
was only a thought - as i know i can select the midi channel that my djm101 uses. it's set on mine via a small selector on the side. i have mine set to minimum which is midi channel one. i presume your controller uses channels 1 thru 4 in that case whereas if u had it set to 2 then it would use channels 2 thru 5 etc... |
| Latesha Wolfenberger 03.03.2012 | thanks wht do you mean by the midi channel 1? when i seen other people use it online they can choose between the decks, where as i cant |
| Chasidy Heckenbach 03.03.2012 |
Originally Posted by rothwell90
not sure if its for tp2 or not but most of the controls open in xtreme mapping ok. do the controls work as expected and just not the led feedback? i see a lot of OUT's in the mapping as well as IN's. the doc says you can configure the midi channels on the device but they'll need to be set to default i presume for the mapping to work. the mapping seems to use midi channel 1 for decks A+B and channel 2 for C+D. there's also just a few controls using channels 3+4. if the IN's are working with that tsi tho then the OUT's should be too, unless there's some issue with your actual controller. |
| Latesha Wolfenberger 03.03.2012 | bump |
| Latesha Wolfenberger 20.02.2012 | I can get it to work if I programme myself I'd like it to work on traktor if I could But like I say usually it would light up but for some strange reason it isn't I've tried updating drivers but says got the newest one installed |
| Hanna Ridenbaugh 20.02.2012 | I'll load up decadence le toevening and try it out. see if i can help more. |
| Chasidy Heckenbach 20.02.2012 |
Originally Posted by rothwell90
i have the dj tech djm101 and i actually quite like it... it only has 2 led's tho that use midi notes 80 and 81 on midi channel 1 to make them light up. |
| Latesha Wolfenberger 20.02.2012 | hi im running windows on vista on my laptop i have tried traktor and deckadance but non of the lights seem to work any more ideas would be appreciaed thanks nigel |
| Shonda Soulier 16.02.2012 |
Originally Posted by deevey
DJ Tech have become a major player and their gear has gotten more reliable, not to mention their CS. Hit them up... If it's under warranty you should be fine. |
| Rolanda Clodfelder 16.02.2012 |
It crapped out on me every time I used it. Buttons wouldn't work, LEDs stopped working... I didn't try it in Deckadance though...only Traktor.
|
| Shonda Soulier 15.02.2012 |
Originally Posted by deevey
I owned that controller for about 2 months when it first came out I thought it would be good to have for impromptu mixing at house parties--it does travel well cuz it's so small. It crapped out on me every time I used it. Buttons wouldn't work, LEDs stopped working... I didn't try it in Deckadance though...only Traktor. |
| Hanna Ridenbaugh 15.02.2012 | Well here goes. i own one and although i don't use it now. just for back up now. it was actually a really cool little controller. works flawlessly. Does exactly what it's built to do. toontown have you ever actually used one? Anyway i used it with traktor. never tried decadence. the guy's at djtech were very helpful and quick to respond to my queries. Drop them an email. Best i can advise as i don't believe there are any decadence users around here. hopefully I'm wrong. |
| Rolanda Clodfelder 15.02.2012 | Is there a Mapping preloaded in Deckadance for that controller ? you'll probably need to provide more info about your setup... Windows / Mac Software + Version What have you done to make it work so far - Normally you'd need to select your controller within the software and load a map. |
<< Back to Reviews of DJ equipment Reply