Ennoia APC40 Traktor Mapping Traktor 2.5.0
Ennoia APC40 Traktor Mapping Traktor 2.5.0 Posted on: 02.06.2012 by Lavona Lobner This is the new thread for My Mappings the original can be found here and the journey to get here:http://community .djranking s.com/showthread.php?t=29817 I wrote an essay on my other thread of instructions to this and i got shafted by the login and lost it so here is the file i'll re-write it 2moro. jpeg and video soon too. enjoy ***MACS, Change all in's and outs to APC 40 for all Presets in dropdown*** ***PC's Need Midi Yoke and Str8updrw Max Patch check other thread last page for download links | |
| Rodger Mangus 10.06.2012 |
Originally Posted by nonspacial
|
| Lavona Lobner 09.06.2012 |
Originally Posted by mix-or
|
| Rodger Mangus 09.06.2012 |
Originally Posted by nonspacial
|
| Lavona Lobner 09.06.2012 |
Originally Posted by mix-or
If you're actually on PC then you need Str8updrw's Max Patch which the deposit files link is still working from my old thread... see 1st post for link to it.... max patch is on page 8. If again that's the case (PC) to save you a bit of time reading the whole thread, do the following: Turn on APC Start Max Patch from Final Beta folder Change the top left box to Midi Yoke 2 Leave the one next to it and change both boxes for To Controller and From Controller to APC 40 in the list. Start Traktor If for some reason you don't have MidiYoke installed yet then get it from a google search but it will not install if User Account Control is switched on at all so you must disable it from Control Panel then reboot then install MidiYoke then reboot then turn on UAC again and reboot, to have UAC actually back on or you can just go to the steps above and restart another day. hope that helps Robbie |
| Rodger Mangus 09.06.2012 |
Originally Posted by nonspacial
I imported the tsi v1.1 and chose device "Beatgrid..." with In and out ports on APC40 but no way to control... Is there something i mess? Thanks |
| Lavona Lobner 02.06.2012 | This is the new thread for My Mappings the original can be found here and the journey to get here: http://community .djranking s.com/showthread.php?t=29817 I wrote an essay on my other thread of instructions to this and i got shafted by the login and lost it so here is the file i'll re-write it 2moro. jpeg and video soon too. enjoy ***MACS, Change all in's and outs to APC 40 for all Presets in dropdown*** ***PC's Need Midi Yoke and Str8updrw Max Patch check other thread last page for download links |
| Marcela Allyn 15.09.2012 | I am having a few problems, this template is amazing, I just don't know what I am doing wrong... 1. Holding MOD3 and pressing a cue doesn't seem to delete it. 2. Special page 2 and the beatmasher don't seem to work. I can get it to "kind of" work if I activate the FX before going into that page, but I assume this isn't the intended functionality? 3. All of my EQ's are set all the way to the left when I load. Is there a master reset for this? Thanks so much for all of your work. If I can get these last things working I'll be set! |
| Tawna Feyen 17.08.2012 | Just a heads up the download links for the Max Patch are broken. |
| Rodger Mangus 10.06.2012 |
Originally Posted by nonspacial
|
| Lavona Lobner 09.06.2012 |
Originally Posted by mix-or
|
| Rodger Mangus 09.06.2012 |
Originally Posted by nonspacial
|
| Lavona Lobner 09.06.2012 | it has the 1st 8 slots and is well ready as soon as they release the Midi Commands for the other 12 slots plus pages for the Banks. I's up to N.I. when this is... it has full control of the vol and filter for decks C/D and slot trigger stop load/unload for C/D slots. The way N.I. have currently worked it the selected sample in the slot will be played by the button so i could have slot 1 top, slot 2 middle top, and slot 3 bottom, etc selected and trigger at will... you would need to change the selected sample manually with a mouse to change the triggerable one and by clicking the appropriate place for this it plays that sample so it's either got to be in time or fader/knob down... all controls listed in Jpeg You can also save remix sets to disk and load entire sets to decks C/D and switch the Decks from Track to Remix for C/D independently . peace dude |
| Maxwell Zubke 09.06.2012 | Any chance this has the remix decks on it? I know its probably not possible until NI helps out, but wishful believeing cant hurt! |
| Lavona Lobner 09.06.2012 | It is also worth noting now that Traktor is actually much better at detecting the BPM's and Beatgridding them correctly for tracks if you setup the analysis correctly when you analyse. Here's what i found out today: For House Tracks the normal setting of 60-200 is pretty acurate but for anything else it seems pretty shit. For Drum 'n' Bass it often half Tempo's the tracks and to avoid laborious doubling or clicking and editing setting the analyis to 128-255 works great. For Dubstep it's the same 128-255 works perfectly good. You might believe that it's then just worth setting to that but i discovered some of my slower house tracks then get doubled from their 95-120BPM ranges and thus using the 2 of them i have been able to get the BPM's mostly correct and only had to sort by BPM to adjust very few groups in the massive collections i had to correct less than 1/2 a BPM in either direction. Traktor will not change a difference of 0.001 either way during batch edit and i reckon in a 7 minute track the difference this would make to your mix is potentially irrelevant and so i only change those that are greater than this value manually. Having your tracks beatgrid locked also allows you to transfer these to USB\SD card decks and preserve your grids so that you know the tempo fader is consistent in any other real world situations. My mates Denon's jump all over the place on his tracks and they're always fighting it at breakdowns etc, i put my tracks from taktor on a USB stick and they came up BPM locked and worked great. In the next version of the mapping i have included 2 buttons to Lock and Unlock the Beatgrid from the browser so that you can literally shift click the entire collection and unlock them, analyse and then lock them all again with ease. (that's all i've done so i won't be uploading it til there are some 1 shot FX too) Laters (Also set your Tempo Fader Range to 8% and it you can beat match with ease manually. at 128BPM 0.8% = 1BPM ish, at 174BPM 0.5-6% = 1 BPM ish) |
| Lavona Lobner 09.06.2012 |
Originally Posted by mix-or
If you're actually on PC then you need Str8updrw's Max Patch which the deposit files link is still working from my old thread... see 1st post for link to it.... max patch is on page 8. If again that's the case (PC) to save you a bit of time reading the whole thread, do the following: Turn on APC Start Max Patch from Final Beta folder Change the top left box to Midi Yoke 2 Leave the one next to it and change both boxes for To Controller and From Controller to APC 40 in the list. Start Traktor If for some reason you don't have MidiYoke installed yet then get it from a google search but it will not install if User Account Control is switched on at all so you must disable it from Control Panel then reboot then install MidiYoke then reboot then turn on UAC again and reboot, to have UAC actually back on or you can just go to the steps above and restart another day. hope that helps Robbie |
| Rodger Mangus 09.06.2012 |
Originally Posted by nonspacial
I imported the tsi v1.1 and chose device "Beatgrid..." with In and out ports on APC40 but no way to control... Is there something i mess? Thanks |
| Lavona Lobner 08.06.2012 | Jpeg attached i'll get doin a video 2moro so it makes more sense but i'm pretty happy with it's structure now |
| Lavona Lobner 06.06.2012 | I've re-uploaded the TSI in case it was a broken one so please re download it from the original post... Sorry PC Users: Max Patch should be set to To Traktor Midi Yoke 2 From Traktor Midi Yoke 1 Controllers APC40 on both Mac Users as above |
| Lavona Lobner 06.06.2012 | Here you go enjoy now knowing what the hell ur looking at |
<< Back to Reviews of DJ equipment Reply