Updated Overlay for VCI-100 Ean?
Updated Overlay for VCI-100 Ean? Posted on: 25.11.2008 by Jose Rodriguez Hey Ean,I had asked you this before and you said it would probably be about a couple months before you have a new overlay for the VCI-100 to work with Traktor Pro and all your new modifications for the program. I was just wondering, might you have a better idea of when exactly? If its still up in the air, no problem, just thought I would ask. Thanks again for everything Reg | |
| Federico Vilas 27.11.2008 |
Originally Posted by Flaekiface
|
| Jose Rodriguez 25.11.2008 | Hey Ean, I had asked you this before and you said it would probably be about a couple months before you have a new overlay for the VCI-100 to work with Traktor Pro and all your new modifications for the program. I was just wondering, might you have a better idea of when exactly? If its still up in the air, no problem, just thought I would ask. Thanks again for everything Reg |
| Petio Petev 05.12.2008 | I really hope a traktor pro the overlay for the VCI-100SE can be specialy designed so as not to cover up the EG special edition/vestax branding top left |
| Federico Vilas 27.11.2008 |
Originally Posted by Flaekiface
|
| casey rascal 26.11.2008 | The easiest thing would probably be to re-label the FX zone yourself, with a label maker or simular. But of cause, the work re-mapping the FX part needs to be done first. |
| 26.11.2008 | Hey Regero, the overlay we currently have works very well with traktor pro. Until new concepts and mix strategies are developed there is not really a need for new overlays at the moment. The only section that could really be radically re-labeled is the FX zone right now. I would like to spend the next month working with the community to come up with the best mapping possible and then look at the right way express those in an overlay. Realistically it will be about 2 months before that would come out. |
<< Back to DJ TechTools' VCI-100 FAQReply