Problem upgrading firmware
Problem upgrading firmware Posted on: 19.12.2008 by Boyce Fennell I've followed the video perfectly but still get the following:Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A Connecting to device 'H8/3052F' on 'COM1' Configuration: 'BOOT Mode' connection - using emulated interface Opening port 'COM1' ... Loading Comms DLL Loaded Comms DLL Initiating BOOT SCI sequence Attempting 9600 Attempting 4800 Attempting 2400 Attempting 1200 Error No 15024: Boot failed MY Serial port is enabled in my BIOS, tried AUTO and tried different IRQs. Tried setting different Com settings: 1, 2, 6. I know it enters boot mode because of no lights. I am using a standard serial cable with a gender changer because the cable I have is female to female. | |
| Boyce Fennell 19.12.2008 | I've followed the video perfectly but still get the following: Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A Connecting to device 'H8/3052F' on 'COM1' Configuration: 'BOOT Mode' connection - using emulated interface Opening port 'COM1' ... Loading Comms DLL Loaded Comms DLL Initiating BOOT SCI sequence Attempting 9600 Attempting 4800 Attempting 2400 Attempting 1200 Error No 15024: Boot failed MY Serial port is enabled in my BIOS, tried AUTO and tried different IRQs. Tried setting different Com settings: 1, 2, 6. I know it enters boot mode because of no lights. I am using a standard serial cable with a gender changer because the cable I have is female to female. |
| 20.12.2008 | people have had problems with gender changers and you may want to try other com ports too- i believe the rule was something over 2 or 3- check out the problem thread for more details. |
<< Back to DJ TechTools' VCI-100 FAQReply