vci-100 left jogwheel won't respond
vci-100 left jogwheel won't respond Posted on: 22.02.2009 by DjMAX MONTANA I have a problem. I'm using the vci-100, w/1.3 firmware on traktor 3.4 (mac 10.4.11, Dual 2.0 G5, 3G ram) and my jogwheel on Deck A is acting up again.The left jogwheel (deck A) will not respond as well as the right jogwheel (deck B) More specifically, when I touch both, the LED will turn red on both, but when there are tracks loaded, the one on the left will not "scratch" the track forward or backward, regardless of how much I spin the jogwheel. The one on the left works correctly. What is wrong, and how do I fix it? It's the second time that this has happened. the first fix involved playing w/the rear sensitivity adjustment (and unscrewing the faulty jogwheel), but I don't use it daily or even weekly, so I can't say that overuse causes it. I don't believe that I should be tweaking the knob/unscrewing the jogwheel every time I use it. Any suggestions? | |
| Mitchel Mollenhauer 24.02.2009 |
Originally Posted by oquela
More detail to follow...... |
| DjMAX MONTANA 22.02.2009 | I have a problem. I'm using the vci-100, w/1.3 firmware on traktor 3.4 (mac 10.4.11, Dual 2.0 G5, 3G ram) and my jogwheel on Deck A is acting up again. The left jogwheel (deck A) will not respond as well as the right jogwheel (deck B) More specifically, when I touch both, the LED will turn red on both, but when there are tracks loaded, the one on the left will not "scratch" the track forward or backward, regardless of how much I spin the jogwheel. The one on the left works correctly. What is wrong, and how do I fix it? It's the second time that this has happened. the first fix involved playing w/the rear sensitivity adjustment (and unscrewing the faulty jogwheel), but I don't use it daily or even weekly, so I can't say that overuse causes it. I don't believe that I should be tweaking the knob/unscrewing the jogwheel every time I use it. Any suggestions? |
| DjMAX MONTANA 24.02.2009 | Fixed! did steps 1, 2, and 3 of the guide. No lubricant needed, and steps 5-8 are really just to see what's inside the encoder. It seems the 3 screws holding the plastic guard in place have a LOT to do with whether or not the jog wheel encoder is tracking correctly. They seem to be very sensitive (what I mean by that is that they have to be tightened pretty equally, or something doesn't work.) Thanks for your help. BTW: this was the SAME encoder that originally was "sticking" with a slight grinding noise. It came this way from the factory. The reason I know this is because there are some hot glue spots missing from when I removed them the first time. |
| DjMAX MONTANA 23.02.2009 | MixerDave & Anthony More, Thanks for the info. I hadn't seen that link in a while. I used it to fix my stuck wheel, but now it seems I need to fix the optical encoder disk. Thanks for the tips. Will post later to give you my results. |
| Mitchel Mollenhauer 23.02.2009 | Cheers Anthony, never had this help when I stripped mine down! Just got stuck in. Oquela...check the optical encoder disc is not warped during re-assembly. Mine was and caused the same issues your having with your VCI. |
| DJ Pablo 23.02.2009 | You can have a look here; http://www.djranking s.com/2008/01/0...-on-a-vci-100/ then click on the direct link in the text.. |
| Mitchel Mollenhauer 24.02.2009 |
Originally Posted by oquela
More detail to follow...... |
| DjMAX MONTANA 23.02.2009 | MixerDave, This is VERY interesting. I've read here that others have this same type of problem. Lots of people tend to have a tight jogwheel on new units, and/or some have this same side not work too with the wheel not scratching or cueing. You wouldn't happen to have pics of you taking this apart, would you? I'm not sure what disc/laser you're referring to. I would hate to make this worse. JesC, midi is ok and jogwheel is linked to A. The tks file is 1.4 TT style. Ean, Maybe you could give some input as to why this happens so often, and how to fix this. |
| Mitchel Mollenhauer 22.02.2009 | I recently had to completely strip my VCI down due to this. Deck A would not scratch but I still got the LED and could use the deck slowly for cueing. I found the disc the laser reads off was warped and moved up and down whilst rotating. I took this off and refitted being careful to equally tighten the 3 screws so the flimsy disc remains flat. This sorted my VCI out a treat! Just a thought. Whilst its off...bang some teflon based lubricant on the brass spindle....they'll glide like a dream. |
| Cristian Carmona 22.02.2009 | Did you check the DECK A jog wheel under midi to see if its link you the Deck A jog wheel on the vci? Also make sure that the scratch button is on sometime if you dont have anything mapped to it and its off the jog wheels will not work. Just a side question, what .TKS are you using? |
<< Back to DJ TechTools' VCI-100 FAQReply