Electrix Tweaker Traktor Pro 2 tsi
Electrix Tweaker Traktor Pro 2 tsi Posted on: 28.03.2013 by Laurence Oleyar Hi folks,I recently bought a Electrix Tweaker and I'm struggling with the tsi-file. It seems the led feedback behavior for the EQs is broken. When switching between the different Modes (Loop, FX and EQ) and getting back to the EQ-Mode, the LEDs arent properly updated and you first have to move one of the knobs to jump to the corresponding software position. I reseted my Traktor Settings and started from Scratch but the issue still remains. I also reseted the Tweaker to default. It's quite diffcult to figure out the problem because the tsi is very complex. Traktor Reference Manual: http://www.electrixpro.com/manuals/T...ence_Guide.pdf TSI-File: http://www.electrixpro.com/mappings/...ktor_Pro_2.tsi Cheers | |
| Laurence Oleyar 31.03.2013 | I believe you miss something here: "Soft Takeover" is only available for Fader/Knob. Also the Tweakers LED-Rings respond on a different Midi-Message than the Encoders itself (which is pretty clever). I got a bit deeper in the way it handels MIDI-Feedback and it seems that there is an issue with the way the Tweaker reacts on a change of the LED-Ring Mode through the "Settings Channel" (16ch). Everytime I press the Modifier Button, which switches the encoders and led-rings to different modes and therefore make them available for different function (like Loop, EQ and FX), Midimessages are send to the "Settings Channel" to achieve that. So for, so good. But the issue is that in the moment e.g. the top-left encoder |
| Cyril Teese 12.06.2013 |
Originally Posted by mixware
As a side note: the Tweaker really is a fun and great controller. The main thing that pulled me to it was it's cross-compatibility with Ableton. As someone kind of just dabbling in Djing, its nice to know I'll have a use for the Tweaker when I eventually transition to fully original sets performed using Live. My only other feedback is that I find the filter knobs would be better suited to just always be active instead of being disabled when the headphone monitors/cue are activated on a given track. I really like being able to have the mix coming out of my headphones pretty much all the time so having an extra step to go through in order to use the filter on the fly is kind of cumbersome. It seems like maybe adding the headphone monitor and mix controls to that "emergency" layer (which I haven't really had to use) may be a good place to toss those in order for the filter knob to always be active? Of course these are just suggestions for the mapping and not the product itself- obviously everyone will have their preferences/two cents but just thought I'd toss mine in :] Thanks again for an innovative and fun to use (AND awesome looking) product! |
| Casimira Tavormina 12.06.2013 |
Originally Posted by Remoire
It'll definitely still stay in my kit bag for awhile yet, if for nothing else than the fact that it lights up like a xmas tree in a evening club and get's all kinds of 'WTF?!?' kind of attention!! Haha!! Oh and just in case anyone was wondering if 'sync' ain't your thing, know that you can totally beatmatch on this controller!! Obviously not jog wheel style, but in 'yellow' mode i use the nudge buttons and the bass EQ encoder (in 'yellow' mode it acts just like the rotary pitch control on the Novation Twitch). It seems to be more smooth than using the channel fader (which in 'yellow' mode also becomes a pitch slider), and you don't end up when you change 'modes' with the physical slider in all kinds of wrong positions in relation to the software. ;-) |
| Cyril Teese 12.06.2013 |
Originally Posted by mixware
I'm experiencing the same issues with the EQ knobs. In addition to the OPs problem, I notice it most when I pre-load a song (say in Deck A for example), and adjust the EQ knobs before starting the track (like to cut out the bass, or make room for the highs, etc). Once I start the song the EQ lights will reset and will no longer reflect the actual knob settings w/o me, like the OP, moving a knob one click to the left or the right. This sucks as I was at a live gig last Friday and in the moment didn't realize my Lows were still turned down from a previous track and when I transitioned to my new song the Tweaker said my Lows were normal but Traktor showed them to be turned all the way down. bummer :[ I obviously don't believe the controller should be doing all the work for me, but working as advertised would be swell... I'm considering selling it and going for the Twitch instead. A new functioning mapping would be so killer!! |
| Laurence Oleyar 31.03.2013 | I believe you miss something here: "Soft Takeover" is only available for Fader/Knob. Also the Tweakers LED-Rings respond on a different Midi-Message than the Encoders itself (which is pretty clever). I got a bit deeper in the way it handels MIDI-Feedback and it seems that there is an issue with the way the Tweaker reacts on a change of the LED-Ring Mode through the "Settings Channel" (16ch). Everytime I press the Modifier Button, which switches the encoders and led-rings to different modes and therefore make them available for different function (like Loop, EQ and FX), Midimessages are send to the "Settings Channel" to achieve that. So for, so good. But the issue is that in the moment e.g. the top-left encoder |
| Laurence Oleyar 28.03.2013 | Hi folks, I recently bought a Electrix Tweaker and I'm struggling with the tsi-file. It seems the led feedback behavior for the EQs is broken. When switching between the different Modes (Loop, FX and EQ) and getting back to the EQ-Mode, the LEDs arent properly updated and you first have to move one of the knobs to jump to the corresponding software position. I reseted my Traktor Settings and started from Scratch but the issue still remains. I also reseted the Tweaker to default. It's quite diffcult to figure out the problem because the tsi is very complex. Traktor Reference Manual: http://www.electrixpro.com/manuals/T...ence_Guide.pdf TSI-File: http://www.electrixpro.com/mappings/...ktor_Pro_2.tsi Cheers |
| Hortense Cheatwood 06.11.2013 | any update on a solution? I am contemplating purchasing a tweaker but would like to know this beforehand |
| Hortense Cheatwood 04.11.2013 | Anynews on the permanent LED fix? I am really interested in purchasing a tweaker, but would like this funcionality as I could def see it being troublesome as others have mentioned |
| Laurence Oleyar 02.10.2013 | Anything new on this? I mean is the issue resolved rather than workaround? |
| Cyril Teese 12.06.2013 | Took less than 5 minutes to do and both work perfectly! I am officially a satisfied customer! Woo!!! Thank you tons mixware! |
| Jerica Salava 12.06.2013 | this is what customer service is all about. great job mixware. |
| Stefania Mockler 12.06.2013 | Here you go: http://www.electrixpro.com/mappings/...gsCueShift.zip Filter is on all the time. Now you have to hold shift for Cue Mix and Cue Level - when Monitor Cue in ON for either deck. PS: The link in our previous post also has the editor preset (part of the fix) so download both and use either tsi file (cue mix with or without shift). |
| Stefania Mockler 12.06.2013 | Hey Remoire, Thanks for the feedback!! Your request is easy enough. We'll post a modified tsi shortly... |
| Cyril Teese 12.06.2013 |
Originally Posted by mixware
As a side note: the Tweaker really is a fun and great controller. The main thing that pulled me to it was it's cross-compatibility with Ableton. As someone kind of just dabbling in Djing, its nice to know I'll have a use for the Tweaker when I eventually transition to fully original sets performed using Live. My only other feedback is that I find the filter knobs would be better suited to just always be active instead of being disabled when the headphone monitors/cue are activated on a given track. I really like being able to have the mix coming out of my headphones pretty much all the time so having an extra step to go through in order to use the filter on the fly is kind of cumbersome. It seems like maybe adding the headphone monitor and mix controls to that "emergency" layer (which I haven't really had to use) may be a good place to toss those in order for the filter knob to always be active? Of course these are just suggestions for the mapping and not the product itself- obviously everyone will have their preferences/two cents but just thought I'd toss mine in :] Thanks again for an innovative and fun to use (AND awesome looking) product! |
| Stefania Mockler 12.06.2013 | We're working on this issue via a firmware update. This is unfortunately not something we can fix permanently via a new mapping. We've uploaded the fix we described above so you can just install the files instead of modifying the mapping yourself. This fix will put the rings in Walk mode for all layers. It's not as cool as having the rings change with the layers, but at least it's functional while we work on the permanent fix. Here is the link for the zip file. Make sure to follow the included instructions. http://www.electrixpro.com/mappings/...TraktorFix.zip |
| Casimira Tavormina 12.06.2013 |
Originally Posted by Remoire
It'll definitely still stay in my kit bag for awhile yet, if for nothing else than the fact that it lights up like a xmas tree in a evening club and get's all kinds of 'WTF?!?' kind of attention!! Haha!! Oh and just in case anyone was wondering if 'sync' ain't your thing, know that you can totally beatmatch on this controller!! Obviously not jog wheel style, but in 'yellow' mode i use the nudge buttons and the bass EQ encoder (in 'yellow' mode it acts just like the rotary pitch control on the Novation Twitch). It seems to be more smooth than using the channel fader (which in 'yellow' mode also becomes a pitch slider), and you don't end up when you change 'modes' with the physical slider in all kinds of wrong positions in relation to the software. ;-) |
| Cyril Teese 12.06.2013 |
Originally Posted by mixware
I'm experiencing the same issues with the EQ knobs. In addition to the OPs problem, I notice it most when I pre-load a song (say in Deck A for example), and adjust the EQ knobs before starting the track (like to cut out the bass, or make room for the highs, etc). Once I start the song the EQ lights will reset and will no longer reflect the actual knob settings w/o me, like the OP, moving a knob one click to the left or the right. This sucks as I was at a live gig last Friday and in the moment didn't realize my Lows were still turned down from a previous track and when I transitioned to my new song the Tweaker said my Lows were normal but Traktor showed them to be turned all the way down. bummer :[ I obviously don't believe the controller should be doing all the work for me, but working as advertised would be swell... I'm considering selling it and going for the Twitch instead. A new functioning mapping would be so killer!! |
| Stefania Mockler 02.05.2013 | We are making progress with a solution on this and we'll be issuing a fix as soon as possible. The problem is in the way the Tweaker's settings channel interacts with Traktor. This seems to be an intermittent problem and is not happening with every user. In the meantime, you can delete all outgoing messages to Channel 16 in Traktor's controller manager. This will remove all messages sent to the settings channel. Then you'll need to open the Tweaker Editor, change all the encoders to relative, and chose a display mode for the LED rings (EQ, Fill, Walk, Spread). That means the LED display modes will no longer change when changing the control layers for the encoder, it's not ideal but at least they will display the correct value. This is just a temporary fix. It's a good idea to save that as a preset in the editor for the time being. And make sure to hit "save to tweaker' so this setting will remain when the controller is unplugged. Also a good idea to export and save a copy of the tsi once you've deleted the CH16 messages. Once we issue a fix you'll be able to reload the original mapping (or possibly a new version that we will provide) to have the LED display modes change when changing control layers. Hope this helps. |
| Laurence Oleyar 13.04.2013 | If someone should be struggeling with the same issue - I feel like I'm the only one who bought the tweaker - I got a message from the support team:
Sorry for the delay in getting back to you. We had experienced this during the tsi development, but it had been resolved, so we are surprised you are seeing this issue again.
To help troubleshoot the issue, could you let us know: - What firmware version to you have - What version of the tai file are you using? (Is it the one from the CD/website or the one in the Traktor setup wizard? They should be the same file but let us know the process you used to setup Traktor and that will give us a starting point to investigate. |
| Laurence Oleyar 31.03.2013 | I believe you miss something here: "Soft Takeover" is only available for Fader/Knob. Also the Tweakers LED-Rings respond on a different Midi-Message than the Encoders itself (which is pretty clever). I got a bit deeper in the way it handels MIDI-Feedback and it seems that there is an issue with the way the Tweaker reacts on a change of the LED-Ring Mode through the "Settings Channel" (16ch). Everytime I press the Modifier Button, which switches the encoders and led-rings to different modes and therefore make them available for different function (like Loop, EQ and FX), Midimessages are send to the "Settings Channel" to achieve that. So for, so good. But the issue is that in the moment e.g. the top-left encoder |
<< Back to General DiscussionReply