help setting up my CDJs
help setting up my CDJs Posted on: 12.09.2012 by Tori Rumer Hey --- so i am having trouble connecting all this hardware correctly. i am trying to run 2 cdjs and 1 pioneer mixer to run traktor. i got everything working with just using CDs, but when it comes to connecting it to my computer so the traktor data reads through and all works im not sure exactly the parameters -- does anyone perform with this setup that can message me and ill show you what connections i have so far to fix? | |
Tori Rumer 13.09.2012 | if i choose the nexus 900 as my audio device, then my CDJs dont control my traktor decks. but if i choose my CDJs, all the controls work perfectly, but i dont have any options other than "front left" and "front right". here is below Screen Shot 2012-09-13 at 5.55.09 PM.jpgScreen Shot 2012-09-13 at 5.55.14 PM.jpgScreen Shot 2012-09-13 at 5.55.21 PM.jpg see those 3 images? one is with the nexus 900 selected as the audio driver, (i get alot of output options, but no control of the traktor decks by the CDjs) the other is the CDJ-900 as the audio option (where i get all the control but like no audio output options -- only front left and front right) |
Tori Rumer 12.09.2012 | Hey --- so i am having trouble connecting all this hardware correctly. i am trying to run 2 cdjs and 1 pioneer mixer to run traktor. i got everything working with just using CDs, but when it comes to connecting it to my computer so the traktor data reads through and all works im not sure exactly the parameters -- does anyone perform with this setup that can message me and ill show you what connections i have so far to fix? |
Tori Rumer 17.09.2012 | okay i figured it out..... i had my CDJs and Mixer USB plugged into a USB splitter that was going into my mac. apparently that doesnt work. the mixer USB has to be plugged in directly - the 2 CDJs can go into the splitter. Thanks everyone for the input! |
Francene Klimmek 14.09.2012 | Let's use your Nexus as the Audio Device for simplicity. All the outputs on your nexus will be listed from 0 to 9 0 will be equivalent to Channel 1 on your Mixer L, 1 = Channel 1 R 2 and 3 = Channel 2 L and R 4 & 5 = Channel 3 L and R Etc. Go to your settings "Audio Setup" , "Audio Device" - nexus Go to settings "Output routing" - "output deck A" L and R use 0 & 1 Output deck B use 2 & 3. Sound should come out of these two mixer channels now on your nexus . Don't forget to select the appropriate sound source on the Mixer itself. Then go to controller manager and check if the 900s are listed |
Tori Rumer 13.09.2012 | i do have the cables plugged in correctly right? i have RCA cables going from my monitors to the back to the MASTER output L and R |
Tori Rumer 13.09.2012 | if i choose the nexus 900 as my audio device, then my CDJs dont control my traktor decks. but if i choose my CDJs, all the controls work perfectly, but i dont have any options other than "front left" and "front right". here is below Screen Shot 2012-09-13 at 5.55.09 PM.jpgScreen Shot 2012-09-13 at 5.55.14 PM.jpgScreen Shot 2012-09-13 at 5.55.21 PM.jpg see those 3 images? one is with the nexus 900 selected as the audio driver, (i get alot of output options, but no control of the traktor decks by the CDjs) the other is the CDJ-900 as the audio option (where i get all the control but like no audio output options -- only front left and front right) |
Francene Klimmek 13.09.2012 | Audio routing. You can either use your DJM as the sound card completely or use the cdj900. You ll need to set up the CDJs as aggregate devices if you wanna use the CDJs as your sound card. Check the pioneer website for instructions and a program to automate that process. http://www.pioneer.eu/files/support/...Aggregator.zip Following which you will have to select that device as a sound card . Then you can choose your channels in traktor external mixer/routing setting. If you choose to use your Nexus mixer though, you don't have to set up aggregate devices , just choose your Nexus as the audio device. |
Nita Eviston 13.09.2012 | Also, once you get 2.5.1, make sure you change your CDJ900 HID mode to advanced! Hold down the menu button, scroll down to HID mode and flick it to advanced |
Tori Rumer 13.09.2012 | now all i gotta figure out is how to set up the audio routing... when i open up the external mixer tab of traktor and go to the audio tabs all i see if "left" and "right".... doesnt seem like enough options? |
Tori Rumer 13.09.2012 | thanks! |
Tori Rumer 13.09.2012 | olay got it to work. thats all it was. need to take a usb thumb drive, copy and paste those files onto it. do the cdj trick of holding down the buttons while turning it on and just plugging it in. it does that update automatically |
Alla Bluemke 13.09.2012 | You need to go to your NI service center and update you traktor to 2.5.1 Then go to this for CDJ 900 http://pioneerdj.com/support/product...p=CDJ-900&t=92 |
Tori Rumer 12.09.2012 | and to do the firmware update i just follow that process on the link i put up? okay i believe youre right actually. i just wasnt sure because im on a mac and when i upzipped the file from their site i didnt really recognize those file types |
Ciara Cuttill 12.09.2012 | i believe you have to update the firmware on your cdjs to enable them in traktor if you have done all the above already. |
Tori Rumer 12.09.2012 | i updated traktor to the newest drivers -- is that the same thing? or can you link me to the HID update if its different? |
Alla Bluemke 12.09.2012 | did you update traktor to work with HID? |
Tori Rumer 12.09.2012 | cdj 900s and nexus 900 mixer. i have both cdjs USB connected to my mac and also the mixer USB connected. i can scroll through on the screens and see my songs in traktor. and when traktor is playing music i can mess with it on the mixer, but none of the CDJ buttons work. i was reading that i need to do a firmware update, but it looks pretty absurd. here is the link http://pioneerdj.com/support/files/i...e_guide-en.pdf is that really what i need to do to get the cdjs to control the traktor info? |
Leeanna Ayla 12.09.2012 | What CDJ's and what mixer? |
<< Back to General DiscussionReply