Setting up TSP with a Korg Zero 4 ???

Home :: General Discussion :: Setting up TSP with a Korg Zero 4 ???Reply
Setting up TSP with a Korg Zero 4 ???
Posted on: 15.09.2012 by Nereida Jasnoch
Hi, it's me again with my massive learning curve mixer.

2 weeks ago I bought TSP 2 (the scratch upgrade kit for scratch certified mixers, I use the soundcard of my mixer, not a NI soundcard) and multiple times I tried to set it up but I never can get it "fully setup".

I can manipulate the tracks in traktor with the vinyl, and flipping it loads the next track. And I can hear the tracks on my speakers wich are plugged into the mixer.

BUT I can't mix. Volume faders do nothing (with them all down I can still hear the tracks) EQ's do nothing,...
You get the picture.

Skype or screenshots would be a massive help. Thanks in advance.
Nereida Jasnoch
18.09.2012
Originally Posted by Stewe
It is midi controller as well so check for MIDI mode have maybe being enabled - just try to map some knobs with midi learn on. If that you might need to disable it. Only a thought...
GOOD GOD!

At first glance, this solved the problem. It was in midi mode, so then I had to map the faders etc. In audio mode it works like I wanted it too.

God it's things like this that make me love this community .
Kellie Myrum
18.09.2012
Originally Posted by MyUsername
The problem is that the signal seems to bypass the mixing section and the line faders and everything else on the mixer has no effect on the audio. Very, very strange.
It is midi controller as well so check for MIDI mode have maybe being enabled - just try to map some knobs with midi learn on. If that you might need to disable it. Only a thought...
Nereida Jasnoch
18.09.2012
Originally Posted by OmniRoss
You need to make sure that your outputs correspond with your inputs...
I'm sorry but what ?

The timecode signal from the vinyl reaches the software, I can play tracks, scratch etc.

- So the inpust are good probably.

The outputs I've selected are the only ones that get the sound to the speakers.

- So it seems that these outputs are my only option


The problem is that the signal seems to bypass the mixing section and the line faders and everything else on the mixer has no effect on the audio. Very, very strange.
Nereida Jasnoch
18.09.2012
Originally Posted by photojojo
Give us some screen shots of your routings



Originally Posted by BuRdTuRd
You have to hit the A or B above the line faders on the mixer. Only thing I can believe of.
Nope.

Originally Posted by OmniRoss
Make sure you're in external mixing mode.
I am.

Originally Posted by Percy
Here is a link for Traktor adpt in case you don't already have it. http://traktor-adapt-for-zero-4.mac.informer.com/
I have it. Used it. Nope.
Nereida Jasnoch
15.09.2012
Hi, it's me again with my massive learning curve mixer.

2 weeks ago I bought TSP 2 (the scratch upgrade kit for scratch certified mixers, I use the soundcard of my mixer, not a NI soundcard) and multiple times I tried to set it up but I never can get it "fully setup".

I can manipulate the tracks in traktor with the vinyl, and flipping it loads the next track. And I can hear the tracks on my speakers wich are plugged into the mixer.

BUT I can't mix. Volume faders do nothing (with them all down I can still hear the tracks) EQ's do nothing,...
You get the picture.

Skype or screenshots would be a massive help. Thanks in advance.
Kellie Myrum
18.09.2012
Glad that helps
Leeanna Ayla
18.09.2012
+ one million internetz to stewe.
Nereida Jasnoch
18.09.2012
Originally Posted by Stewe
It is midi controller as well so check for MIDI mode have maybe being enabled - just try to map some knobs with midi learn on. If that you might need to disable it. Only a thought...
GOOD GOD!

At first glance, this solved the problem. It was in midi mode, so then I had to map the faders etc. In audio mode it works like I wanted it too.

God it's things like this that make me love this community .
Kellie Myrum
18.09.2012
Originally Posted by MyUsername
The problem is that the signal seems to bypass the mixing section and the line faders and everything else on the mixer has no effect on the audio. Very, very strange.
It is midi controller as well so check for MIDI mode have maybe being enabled - just try to map some knobs with midi learn on. If that you might need to disable it. Only a thought...
Nereida Jasnoch
18.09.2012
Originally Posted by OmniRoss
You need to make sure that your outputs correspond with your inputs...
I'm sorry but what ?

The timecode signal from the vinyl reaches the software, I can play tracks, scratch etc.

- So the inpust are good probably.

The outputs I've selected are the only ones that get the sound to the speakers.

- So it seems that these outputs are my only option


The problem is that the signal seems to bypass the mixing section and the line faders and everything else on the mixer has no effect on the audio. Very, very strange.
Annalisa Shogren
18.09.2012
You need to make sure that your outputs correspond with your inputs...
Nereida Jasnoch
18.09.2012
^Woops, one of the pics is supposed to be this one:

Nereida Jasnoch
18.09.2012
Originally Posted by photojojo
Give us some screen shots of your routings



Originally Posted by BuRdTuRd
You have to hit the A or B above the line faders on the mixer. Only thing I can believe of.
Nope.

Originally Posted by OmniRoss
Make sure you're in external mixing mode.
I am.

Originally Posted by Percy
Here is a link for Traktor adpt in case you don't already have it. http://traktor-adapt-for-zero-4.mac.informer.com/
I have it. Used it. Nope.
Annalisa Shogren
17.09.2012
Make sure you're in external mixing mode.
Kamala Temple
17.09.2012
You have to hit the A or B above the line faders on the mixer. Only thing I can believe of.
Erich Fearday
16.09.2012
Here is a link for Traktor adpt in case you don't already have it. http://traktor-adapt-for-zero-4.mac.informer.com/
Erich Fearday
16.09.2012
To set the channels up on the mixer you need to run a small piece of free software called Traktor Adapt. This sets the mixeer up if i remember correct. Just google it. Great mixer but the first set up for T.S.P is a pain from what i remember.
Leeanna Ayla
15.09.2012
Give us some screen shots of your routings

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy