Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

Denon Mc3000 Traktor mapping, help

Home :: General Discussion :: Denon Mc3000 Traktor mapping, helpReply

Denon Mc3000 Traktor mapping, help Posted on: 29.09.2012 by Iluminada Vandevoort Just bought the Denon Mc3000 and trakto 2.5 pro. On the set up I matched it with the Denon Mc3000 and everything was fine, decks A and B work as intended and what not. However, I don't believe all the keys are mapped. Like, when I want to put a track on deck C and D, the play/pause button doesn't work, but the low mid hi filter etc works fine. I'm guessing this is a mapping issue? Also, how do the effects work in traktor? Do I have to set them up? If so, how do I do this? My effects are not working at all, I press fx on 1 with group settings, and when I turn on an individual effect nothing happens.
Iluminada Vandevoort 02.10.2012	Originally Posted by SirReal http://usa.d-mpro.com/us/denondj/Pro...oductId=MC3000 It's on the bottom left. Denon did a stupid thing and separated their Dj stuff from everything else and since then it's much more difficult to navigate. Ah, was difficult to spot it. Cheers man!
Iluminada Vandevoort 02.10.2012	Originally Posted by SirReal This was taken from the product page on the Denon site for the MC3000. Maybe you should start there. DUH! ***Important Notice for Traktor 2.5.0 Users*** The Mapping (.tsi) file for the MC3000 included in the latest release of Traktor (2.5.0) is missing the mappings related with Loop Recorder and Remix Decks. These will be updated and replaced in future builds of Traktor software. To utilize these features with the current version please download and install the mapping file (Traktor Pro 2.5 Mapping & Instructions) which can be found under the 'downloads' heading on this page. I'm on the Denon website but can't seem to find the download link for the missing maps.
Iluminada Vandevoort 02.10.2012	Originally Posted by robdquick If it's the same as on my MC6000, the efx 1 button doesn't do anything, and the efx 1 knob controls the wet/dry for the effects section. So EFX 2/3/4 knob/buttons actually control FX1/2/3 in traktor if in group mode, and effect parameter 1/2/3 in single mode. EFX 1 has a button underneath it for if you are using it with virtaul dj, as you can use more than 3 effects at a time in virtual dj. To change the effects on each knob, hold down the shift button and then rotate the EFX 2/3/4 knob, this should change the effect that is assigned to that knob. I don't use samples so I can't help you there. Did it not come with a manual explaining everything? Does your decks C and D function properly? I'm unable to loop and create any cue points in those 2 decks.
Cassie Sangermano 01.10.2012	Originally Posted by DemiAlex EFX.1 is the name of one of the knobs on FX1 section in my controller. I posted the screenshot, can you show me where the option to manually place the effects to each knobs are? Also, how do I create samples and store them? If it's the same as on my MC6000, the efx 1 button doesn't do anything, and the efx 1 knob controls the wet/dry for the effects section. So EFX 2/3/4 knob/buttons actually control FX1/2/3 in traktor if in group mode, and effect parameter 1/2/3 in single mode. EFX 1 has a button underneath it for if you are using it with virtaul dj, as you can use more than 3 effects at a time in virtual dj. To change the effects on each knob, hold down the shift button and then rotate the EFX 2/3/4 knob, this should change the effect that is assigned to that knob. I don't use samples so I can't help you there. Did it not come with a manual explaining everything?
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe If by "EFX.1" you believe on Unit on buttons at mixer section of the screen then answer is yes. EFX.1 is the name of one of the knobs on FX1 section in my controller. I posted the screenshot, can you show me where the option to manually place the effects to each knobs are? Also, how do I create samples and store them?
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe 1. Create a screenshot. 2. It means how many FX units you want to display and use. 3. With group mode you will have three effects per FX unit and single mode says for itself. So with group mode, if I enabled EFX.1 for example, it would auto play 3 different effects at once depending on which effects are assigned to it? Screenshots: traktor.jpg traktor2.jpg
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe I thought you are talking about FX units 1 and 2. It looks like you need to select effect in slots there. Click on little arrow next to related effect to select it from drop down menu or map "effect selector" command and set it to button-direct and select effect that you want. You can map multiple effect to one button. Where is related effects? I don't see this page anywhere, all I have is an effect page with no little arrows or a drop down menu or effect selector to place individual effects onto my settings. What does 2Fx units and 4FX units mean? Also on the FX panel mode, what settings should they be at? Group or Single?
Kellie Myrum 30.09.2012	Originally Posted by DemiAlex Yeah I imported it twice from the import button @ preferences. I'm using a 4 deck mapping file downloaded from the internet since the one traktor supported isn't fully functional. The play button works now on deck C and D, however I can't loop anything from those decks:/ I downloaded the mapping file from http://www.traktorbible.com/freaks/m...ne.aspx?id=179 The traktor version I am using is 2.5.1 What does insert and send mean? Is there anyway I could customize which effect button does what? I checked on the effects page and it says I'm using all the default effects, however EFX.1 on FX1 doesn't do anything, yet EFX.2 EFX.3 and EFX.4 on FX1 function as intended. Goes the same for on FX2, EFX.1 works fine, however the rest doesn't work (although it says they are in effect, there's nothing noticiable with it on or off). I thought you are talking about FX units 1 and 2. It looks like you need to select effect in slots there. Click on little arrow next to related effect to select it from drop down menu or map "effect selector" command and set it to button-direct and select effect that you want. You can map multiple effect to one button.
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe 1. Did you reload your mapping twice from big import button? Also which mapping and traktor version do you use? 2. Check FX routing and set "insert" mode instead of "send". Yeah I imported it twice from the import button @ preferences. I'm using a 4 deck mapping file downloaded from the internet since the one traktor supported isn't fully functional. The play button works now on deck C and D, however I can't loop anything from those decks:/ I downloaded the mapping file from http://www.traktorbible.com/freaks/m...ne.aspx?id=179 The traktor version I am using is 2.5.1 What does insert and send mean? Is there anyway I could customize which effect button does what? I checked on the effects page and it says I'm using all the default effects, however EFX.1 on FX1 doesn't do anything, yet EFX.2 EFX.3 and EFX.4 on FX1 function as intended. Goes the same for on FX2, EFX.1 works fine, however the rest doesn't work (although it says they are in effect, there's nothing noticiable with it on or off).
Iluminada Vandevoort 29.09.2012	Just bought the Denon Mc3000 and trakto 2.5 pro. On the set up I matched it with the Denon Mc3000 and everything was fine, decks A and B work as intended and what not. However, I don't believe all the keys are mapped. Like, when I want to put a track on deck C and D, the play/pause button doesn't work, but the low mid hi filter etc works fine. I'm guessing this is a mapping issue? Also, how do the effects work in traktor? Do I have to set them up? If so, how do I do this? My effects are not working at all, I press fx on 1 with group settings, and when I turn on an individual effect nothing happens.
Antonetta Wikel 02.10.2012	No prob, hope it helps but I'm not holding my breath. The tsi for the Denon sc2000 was horrible and needed much tweaking. Let us know how it goes.
Iluminada Vandevoort 02.10.2012	Originally Posted by SirReal http://usa.d-mpro.com/us/denondj/Pro...oductId=MC3000 It's on the bottom left. Denon did a stupid thing and separated their Dj stuff from everything else and since then it's much more difficult to navigate. Ah, was difficult to spot it. Cheers man!
Antonetta Wikel 02.10.2012	http://usa.d-mpro.com/us/denondj/Pro...oductId=MC3000 It's on the bottom right. Denon did a stupid thing and separated their Dj stuff from everything else and since then it's much more difficult to navigate.
Iluminada Vandevoort 02.10.2012	Originally Posted by SirReal This was taken from the product page on the Denon site for the MC3000. Maybe you should start there. DUH! ***Important Notice for Traktor 2.5.0 Users*** The Mapping (.tsi) file for the MC3000 included in the latest release of Traktor (2.5.0) is missing the mappings related with Loop Recorder and Remix Decks. These will be updated and replaced in future builds of Traktor software. To utilize these features with the current version please download and install the mapping file (Traktor Pro 2.5 Mapping & Instructions) which can be found under the 'downloads' heading on this page. I'm on the Denon website but can't seem to find the download link for the missing maps.
Antonetta Wikel 01.10.2012	This was taken from the product page on the Denon site for the MC3000. Maybe you should start there. DUH! ***Important Notice for Traktor 2.5.0 Users*** The Mapping (.tsi) file for the MC3000 included in the latest release of Traktor (2.5.0) is missing the mappings related with Loop Recorder and Remix Decks. These will be updated and replaced in future builds of Traktor software. To utilize these features with the current version please download and install the mapping file (Traktor Pro 2.5 Mapping & Instructions) which can be found under the 'downloads' heading on this page.
Iluminada Vandevoort 02.10.2012	Originally Posted by robdquick If it's the same as on my MC6000, the efx 1 button doesn't do anything, and the efx 1 knob controls the wet/dry for the effects section. So EFX 2/3/4 knob/buttons actually control FX1/2/3 in traktor if in group mode, and effect parameter 1/2/3 in single mode. EFX 1 has a button underneath it for if you are using it with virtaul dj, as you can use more than 3 effects at a time in virtual dj. To change the effects on each knob, hold down the shift button and then rotate the EFX 2/3/4 knob, this should change the effect that is assigned to that knob. I don't use samples so I can't help you there. Did it not come with a manual explaining everything? Does your decks C and D function properly? I'm unable to loop and create any cue points in those 2 decks.
Cassie Sangermano 01.10.2012	Originally Posted by DemiAlex EFX.1 is the name of one of the knobs on FX1 section in my controller. I posted the screenshot, can you show me where the option to manually place the effects to each knobs are? Also, how do I create samples and store them? If it's the same as on my MC6000, the efx 1 button doesn't do anything, and the efx 1 knob controls the wet/dry for the effects section. So EFX 2/3/4 knob/buttons actually control FX1/2/3 in traktor if in group mode, and effect parameter 1/2/3 in single mode. EFX 1 has a button underneath it for if you are using it with virtaul dj, as you can use more than 3 effects at a time in virtual dj. To change the effects on each knob, hold down the shift button and then rotate the EFX 2/3/4 knob, this should change the effect that is assigned to that knob. I don't use samples so I can't help you there. Did it not come with a manual explaining everything?
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe If by "EFX.1" you believe on Unit on buttons at mixer section of the screen then answer is yes. EFX.1 is the name of one of the knobs on FX1 section in my controller. I posted the screenshot, can you show me where the option to manually place the effects to each knobs are? Also, how do I create samples and store them?
Kellie Myrum 30.09.2012	If by "EFX.1" you believe on Unit on buttons at mixer section of the screen then answer is yes.
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe 1. Create a screenshot. 2. It means how many FX units you want to display and use. 3. With group mode you will have three effects per FX unit and single mode says for itself. So with group mode, if I enabled EFX.1 for example, it would auto play 3 different effects at once depending on which effects are assigned to it? Screenshots: traktor.jpg traktor2.jpg
Kellie Myrum 30.09.2012	1. Create a screenshot. 2. It means how many FX units you want to display and use. 3. With group mode you will have three effects per FX unit and single mode says for itself.
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe I thought you are talking about FX units 1 and 2. It looks like you need to select effect in slots there. Click on little arrow next to related effect to select it from drop down menu or map "effect selector" command and set it to button-direct and select effect that you want. You can map multiple effect to one button. Where is related effects? I don't see this page anywhere, all I have is an effect page with no little arrows or a drop down menu or effect selector to place individual effects onto my settings. What does 2Fx units and 4FX units mean? Also on the FX panel mode, what settings should they be at? Group or Single?
Kellie Myrum 30.09.2012	Originally Posted by DemiAlex Yeah I imported it twice from the import button @ preferences. I'm using a 4 deck mapping file downloaded from the internet since the one traktor supported isn't fully functional. The play button works now on deck C and D, however I can't loop anything from those decks:/ I downloaded the mapping file from http://www.traktorbible.com/freaks/m...ne.aspx?id=179 The traktor version I am using is 2.5.1 What does insert and send mean? Is there anyway I could customize which effect button does what? I checked on the effects page and it says I'm using all the default effects, however EFX.1 on FX1 doesn't do anything, yet EFX.2 EFX.3 and EFX.4 on FX1 function as intended. Goes the same for on FX2, EFX.1 works fine, however the rest doesn't work (although it says they are in effect, there's nothing noticiable with it on or off). I thought you are talking about FX units 1 and 2. It looks like you need to select effect in slots there. Click on little arrow next to related effect to select it from drop down menu or map "effect selector" command and set it to button-direct and select effect that you want. You can map multiple effect to one button.
Iluminada Vandevoort 30.09.2012	Originally Posted by Stewe 1. Did you reload your mapping twice from big import button? Also which mapping and traktor version do you use? 2. Check FX routing and set "insert" mode instead of "send". Yeah I imported it twice from the import button @ preferences. I'm using a 4 deck mapping file downloaded from the internet since the one traktor supported isn't fully functional. The play button works now on deck C and D, however I can't loop anything from those decks:/ I downloaded the mapping file from http://www.traktorbible.com/freaks/m...ne.aspx?id=179 The traktor version I am using is 2.5.1 What does insert and send mean? Is there anyway I could customize which effect button does what? I checked on the effects page and it says I'm using all the default effects, however EFX.1 on FX1 doesn't do anything, yet EFX.2 EFX.3 and EFX.4 on FX1 function as intended. Goes the same for on FX2, EFX.1 works fine, however the rest doesn't work (although it says they are in effect, there's nothing noticiable with it on or off).
Kellie Myrum 30.09.2012	1. Did you reload your mapping twice from big import button? Also which mapping and traktor version do you use? 2. Check FX routing and set "insert" mode instead of "send".

<< Back to General Discussion Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Albania is:

Denon Mc3000 Traktor mapping, help