Audio 6 with behringer nox606 mixer
Audio 6 with behringer nox606 mixer Posted on: 01.12.2012 by Thanh Modesitt Hello AllFirstly Sorry , As it is nox303 and not nox606. I recently got audio 6 and behringer nox303 mixer I am trying to connect both but with no success. Here is what i am doing 1) connecting audio 6 to laptop with usb cable and have only "line" checked in audio 6 setup 2) connecting output 1 from audio 6 to input A of mixer with RCA and output 2 from Audio 6 to input B of mixer.(Line) 3) going to traktor mixing mode and selecting external. i have connected the output of mixer to the speaker and also hooked a headphone to the mixer. The Audio 6 doesnt have any lights on other than the USB. I am stuck people. Please tell me what exactly am i doing wrong here ? . After running the setup wizzard i get the window saying Audio 6 External mixer and the external mixing window opens. where i have to choose Deck A to go to mixer A and Deck B to go to Mixer B I am frustrated. Any help will be greatly appreciated. Cheers!! | |
| Thanh Modesitt 02.12.2012 |
Originally Posted by MrPopinjay
ty a ton mate Although, I figured out the setup late last evening . Its nearly the same as you said , just that I am not doing Audio 6 Main out to Mixer Line Input 3 Is that required ? the sound is playing even without that .. I am taking the output of the Mixer to the speaker . What exactly happens when i do Audio 6 out to mixer line input 3 ? |
| Thanh Modesitt 01.12.2012 | Hello All Firstly Sorry , As it is nox303 and not nox606. I recently got audio 6 and behringer nox303 mixer I am trying to connect both but with no success. Here is what i am doing 1) connecting audio 6 to laptop with usb cable and have only "line" checked in audio 6 setup 2) connecting output 1 from audio 6 to input A of mixer with RCA and output 2 from Audio 6 to input B of mixer.(Line) 3) going to traktor mixing mode and selecting external. i have connected the output of mixer to the speaker and also hooked a headphone to the mixer. The Audio 6 doesnt have any lights on other than the USB. I am stuck people. Please tell me what exactly am i doing wrong here ? . After running the setup wizzard i get the window saying Audio 6 External mixer and the external mixing window opens. where i have to choose Deck A to go to mixer A and Deck B to go to Mixer B I am frustrated. Any help will be greatly appreciated. Cheers!! |
| Thanh Modesitt 02.12.2012 | alright mate .. i knew that . was still wondering i am missing something. All clear now ! |
| Kiyoko Wellisch 02.12.2012 | It's not required. If you have another pair plugged into the third input it means you can mix 3 decks |
| Thanh Modesitt 02.12.2012 |
Originally Posted by MrPopinjay
ty a ton mate Although, I figured out the setup late last evening . Its nearly the same as you said , just that I am not doing Audio 6 Main out to Mixer Line Input 3 Is that required ? the sound is playing even without that .. I am taking the output of the Mixer to the speaker . What exactly happens when i do Audio 6 out to mixer line input 3 ? |
| Kiyoko Wellisch 01.12.2012 | Audio6 Out A (3 + 4) -> Mixer Line Input 1 Audio6 Out B (5 + 6) -> Mixer Line Input 2 Audio6 Out MAIN (1 + 2) -> Mixer Line Input 3 Ensure all the switches above the EQs on the mixer are set to LINE In the traktor audio settings: EXTERNAL mixing Deck A = 3 + 4 Deck B = 5 + 6 Deck C = 1 + 2 Deck D = 1 + 2 (deck C and D will both be on channel 3. Probably best to make one or both remix decks) Does that work? When you load tracks into the decks and play them do the green OUT lights on the Audio6 light up? Faders up? Cross fader in the middle? Crossfader assignment switches below EQs set to OFF? EQs left at 12oclock? Master + booth volume knobs turned up? edit: No, you do not need to connect the mixer via USB. |
| Thanh Modesitt 01.12.2012 | Also do i need to connect the mixer via usb cable to the laptop ? |
<< Back to General DiscussionReply