TRAKTOR recording question

Home :: General Discussion :: TRAKTOR recording questionReply
TRAKTOR recording question
Posted on: 15.12.2012 by Dania Hillers
Hey guys, kinda noob question but used cdj all my life and I'm not getting the point. I hook up the following setup for a young cousin thats now interested in EDM:

.TRAKTOR PRO 2.5.1
.TRAKTOR AUDIO 2
.NUMARK MIXTRACK

I've set it to Internal Recording (since there's no inputs in TA2 I can't route it to Audacity and record externally right?) but when the crossfader is in the middle I can clearly hear the sound coming from the opposite channel, even with the eq faders cranked down. When I put the crossfader all the oppositte way it gets clear, but mix that way sucks. What am I not getting?

Thanks in advance!
Dania Hillers
15.12.2012
Originally Posted by Nicky H
Traktor 2.6 added Z and P800 which totally kill the sound..
The other eq's are not "full" kills - try updating to 2.6
=D

Thats it, solved!

Thanks to all
Dania Hillers
15.12.2012
Originally Posted by MaxOne
Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO

There's no Z ISO mode in EQ Selection here. Just NUO, CLASSIC, XONE and P600
Dania Hillers
15.12.2012
Originally Posted by MaxOne
Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO
Thanks for the tips. I'm not from a english speaking country, sorry for misleading terms
Dania Hillers
15.12.2012
Originally Posted by OmniRoss
Make sure you've got your cross fader assigned correctly within Traktor.
It's correctly assigned. Look, if u mix without a real mixer, using traktor internal mode, the sound always leaks when the vhannel volume is up, but the eq faders all the way down?
Dania Hillers
15.12.2012		Hey guys, kinda noob question but used cdj all my life and I'm not getting the point. I hook up the following setup for a young cousin thats now interested in EDM:

.TRAKTOR PRO 2.5.1
.TRAKTOR AUDIO 2
.NUMARK MIXTRACK

I've set it to Internal Recording (since there's no inputs in TA2 I can't route it to Audacity and record externally right?) but when the crossfader is in the middle I can clearly hear the sound coming from the opposite channel, even with the eq faders cranked down. When I put the crossfader all the oppositte way it gets clear, but mix that way sucks. What am I not getting?

Thanks in advance!
Dania Hillers
15.12.2012
Originally Posted by Nicky H
Traktor 2.6 added Z and P800 which totally kill the sound..
The other eq's are not "full" kills - try updating to 2.6
=D

Thats it, solved!

Thanks to all
Janyce Henningson
15.12.2012		Traktor 2.6 added Z and P800 which totally kill the sound..
The other eq's are not "full" kills - try updating to 2.6
Dania Hillers
15.12.2012
Originally Posted by MaxOne
Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO

There's no Z ISO mode in EQ Selection here. Just NUO, CLASSIC, XONE and P600
Dania Hillers
15.12.2012
Originally Posted by MaxOne
Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO
Thanks for the tips. I'm not from a english speaking country, sorry for misleading terms
Dania Hillers
15.12.2012
Originally Posted by OmniRoss
Make sure you've got your cross fader assigned correctly within Traktor.
It's correctly assigned. Look, if u mix without a real mixer, using traktor internal mode, the sound always leaks when the vhannel volume is up, but the eq faders all the way down?
Hipolito Scionti
15.12.2012		Though you've explained what you're asking pretty badly try adjusting the sharpness of the mixer

Settings > Mixer > Crossfader adjust smooth / sharp bar

Change the EQs to Z ISO eq

Settings > Mixer > EQ Selection > Z ISO
Annalisa Shogren
15.12.2012		Make sure you've got your cross fader assigned correctly within Traktor.
Dania Hillers
15.12.2012		The EQ faders do work, but the sound "leaks" off the channel B, for example, a lot when the crossfaders isn't 100% left to channel A. Is it the lack of a proper mixer?
Tatum Ansaldo
15.12.2012		I'm not sure I fully understand what you're saying, do you mean the channel faders don't work? Try to explain a little better.

For starters make sure you're in INTERNAL mixing mode rather than external.

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy