Help me midi fighter has 13 leds on and it wont work
Home :: MIDIfighter Resources and Discussion :: Help me midi fighter has 13 leds on and it wont workReply
Help me midi fighter has 13 leds on and it wont work Posted on: 20.06.2011 by Jeanine Waylett upon switching from 2 deck mode back to 4 deck mode my midi fighter went spastic and 13 of the led's are on i cant go into mode select i cant reset it it is basically crippled now i have been using instans grat mapping but i also use it as midi drums in ableton so the problem happened changing back to 4 decks mode the lights that are on are as follows if that matters#*## *### *### #### #being the leds that are on please help me sorry if this question has allready been answered somewhere else please direct me there but i looked for ages and this problem did not seem to come up anywhere else . | |
| Carma Panhorst 23.06.2011 |
Originally Posted by Nightwalkerian
downloaded the firmware and tried to upload it using the four corner button method and it's just telling me that it cant do anything because it "failed to find midi in bootloader mode" im using a Mac Bok Pro with Traktor 2.0.1 and this is all i can believe of |
| Jeanine Waylett 20.06.2011 | upon switching from 2 deck mode back to 4 deck mode my midi fighter went spastic and 13 of the led's are on i cant go into mode select i cant reset it it is basically crippled now i have been using instans grat mapping but i also use it as midi drums in ableton so the problem happened changing back to 4 decks mode the lights that are on are as follows if that matters #*## *### *### #### #being the leds that are on please help me sorry if this question has allready been answered somewhere else please direct me there but i looked for ages and this problem did not seem to come up anywhere else . |
| Inell Rigterink 01.02.2012 | ok -i'll shoot an email out. I've barely used my fighter, hoping i can get this resolved without issue. thank you!! |
| Adolf Hit 30.01.2012 | Hey guys - try contacting support, as both of you are in the US we can arrange a repair. We generally repair product the same day it comes in so you would only be waiting on shipping . |
| Inell Rigterink 27.01.2012 | Same result as the original post on this thread, but diff actions to cause it. -Plugged it in, launched utility and was told that I had old version and needed to update to be compatible with the utility. -Followed the steps and obtained the "Successful!" message along with the checkerboard lights, but there wasn't an OK button to exit the configuration menu/screen (the directions mention selecting ok when its finished) - I unplugged, closed the utility, then plugged back in. Had weird lights config, carried on by launching the utility... "no midi fighter detected" screen appeared and it's been like that ever since. Now my fighter displays mostly lights "on" in a slightly different pattern each time I plug it in. plugging it in once I might get- all lights on except for 1 (off). Next time I do it, I'll get all lights on or some variation... What's the next step ? |
| Carma Panhorst 23.06.2011 |
Originally Posted by Nightwalkerian
downloaded the firmware and tried to upload it using the four corner button method and it's just telling me that it cant do anything because it "failed to find midi in bootloader mode" im using a Mac Bok Pro with Traktor 2.0.1 and this is all i can believe of |
| Adolf Hit 22.06.2011 | The reason it changes from 4 deck to two decks is you are importing all the settings when you open the Tsi - you should just need midi device settings and fx settings for the IG mapping |
| Jeanine Waylett 22.06.2011 | nup scrap that it is still not working properly my midi fighter is now just not working in tractor when i push the buttons the ctrl light comes on in traktor but nothing happens with effects i have deleted reloaded inst grat tsi but it and then some how i lost all my settings in traktor sick about ready to smash this midi fighter i have read threw billion posts nothing seems to help ive re flashed re booted re loaded tsi again and why is it that every time i load it now it changes my traktor from 4 deck mode to 2 deck mode? that was not how it was before help me please i am loosing my mind fuck |
| Jeanine Waylett 21.06.2011 | bro do the boot thing mentioned above. works a treat and then re flash the controller. It may not work at first but keep trying it took me a few goes all you need to do is pull the silicone cover off then grab some speaker wire strip it use some tweezers to put the wire in and it will work just follow the instructions i doubt there could be anything else wrong with it hopefully .. I had to do a set without my midi fighter cause i didnt know how to fix it but it was a good set anyways lol just had to mix a little diff goodluck bro |
| Carma Panhorst 21.06.2011 | and with a different USB cable ALL of the lights are on... and it will not move from that |
| Carma Panhorst 21.06.2011 | i have the same problem and its not the first time my midi has done this i have installed the two micro buttons on the side and nothing will work everytime i plug in the usb the lights are as followed #*## #### #### ###* # = on the buttons wont work and it happened right after a set i played for a school carnival...i have one coming up in two days and i need help |
| Tatum Ansaldo 20.06.2011 | If you can't get into boot mode, read this thread: http://www.djranking s.com/community /showthread.php?t=17824 and reflash the firmware. |
<< Back to MIDIfighter Resources and DiscussionReply