Midi Fighter Utility Problem

Home :: MIDIfighter Resources and Discussion :: Midi Fighter Utility ProblemReply
Midi Fighter Utility Problem
Posted on: 16.09.2011 by Vicente Feldberg
So a got a weird a problem and the program said that I need to post it here, so here it is:

Code:
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
Contacting DJTechTools...
Downloading HEX file
Download success
Putting Midifighter into bootloader mode...
RtMidiOut::sendMessage: error preparing sysex header.
Flashing the Midifighter...
Failed to find a Midifighter in Bootloader mode.
Cleaning up...
Shanta Rork
23.06.2013
Originally Posted by Lauren5
Thanks, its working!
And i'm even using a Windows Vista pc and not a Windows 7 one!
I hope this method will solve a lot of problems! ;d
Sorry for unburrying old post... but was the solution you used ? the so called 'utility' thread doesn't seem to exist anymore and there are so many utility threads...
Vicente Feldberg
16.09.2011
So a got a weird a problem and the program said that I need to post it here, so here it is:

Code:
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
RtMidiIn::openPort: error creating Windows MM MIDI input port.
RtMidiOut::openPort: error creating Windows MM MIDI output port.
Contacting DJTechTools...
Downloading HEX file
Download success
Putting Midifighter into bootloader mode...
RtMidiOut::sendMessage: error preparing sysex header.
Flashing the Midifighter...
Failed to find a Midifighter in Bootloader mode.
Cleaning up...
Shanta Rork
23.06.2013
Originally Posted by Lauren5
Thanks, its working!
And i'm even using a Windows Vista pc and not a Windows 7 one!
I hope this method will solve a lot of problems! ;d
Sorry for unburrying old post... but was the solution you used ? the so called 'utility' thread doesn't seem to exist anymore and there are so many utility threads...
Vicente Feldberg
21.09.2011
Thanks, its working!
And i'm even using a Windows Vista pc and not a Windows 7 one!
I hope this method will solve a lot of problems! ;d
Adolf Hit
20.09.2011
Hey Lauren, check the end of the Utility thread - I have posted a fix to your problem..
Vicente Feldberg
21.09.2011
My leds are like this:
X = Light
O = No light

XOXO
OXOX
XOXO
OXOX

And then I press ok but it don't works...
Adolf Hit
19.09.2011
Hey Lauren,

Please confirm the MF is in fact in bootloader mode before you push the OK key.

In Bootloader mode every other led should be on in a checker board patter.
Cheryll Winquist
17.09.2011
I have no midi software running and it definately looks connected fine and i'm still having issues
Kimberly Lewark
17.09.2011
I've had this problem in both of the following scenarios:

1. Traktor, MIDI-OX or some other MIDI program was running and was already connected to the Midifighter - at least under Windows, it doesn't seem to be possible to have more than one program connect to a given MIDI device

2. The USB plug wasn't in properly - the Midifighter was powered, but communicating with it did not work properly

So check that no other MIDI software is running and that all plugs are properly connected. Also try plugging it into a different USB port.
Cheryll Winquist
17.09.2011
I also do not have traktor running when I try the software and it does the same thing.

Should we try maybe pressing the red switches in the back first?
Vicente Feldberg
17.09.2011
Traktor wasn't running. ;s
Adolf Hit
16.09.2011
It can have an issue if you have any other software which uses midi running at the same time, is it possible you had Traktor/Ableton etc running at the same time?
Cheryll Winquist
16.09.2011
I have the same problem and i'm not sure either

<< Back to MIDIfighter Resources and DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy