Allen & Heath Mixer W/ Chroma Caps
Allen & Heath Mixer W/ Chroma Caps Posted on: 10.01.2013 by Reena Erdei Does any one know whether the Allen & Heath Xone:62 mixer is compatible with the Chroma caps on the DJTT store? Tried the compatibility table at the bottom, and no mention of my mixer. | |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Cole Maroto 10.01.2013 |
Originally Posted by MYE
|
| Bunny Sockel 10.01.2013 |
Originally Posted by Gribble
|
| Reena Erdei 10.01.2013 | Does any one know whether the Allen & Heath Xone:62 mixer is compatible with the Chroma caps on the DJTT store? Tried the compatibility table at the bottom, and no mention of my mixer. |
| Romelia Stankard 12.01.2013 | A&H pots are strange and the flat part is 90* off from like every other pot so no they will not fit. |
| Gemma Saroff 11.01.2013 | Doesn't fit the xone 22 as well. DJTT you know what you have to do!^^ |
| Elizabet Sledz 10.01.2013 | Same goes with the DB2/4. They 'fit' on the knobs, but the markings are 90 degrees off. I imagine it's the same for all their mixers |
| Margaretta Hebenstreit 10.01.2013 | i believe you can fit the fader caps (did that on my 92) but they do not sit properly, they go down too far and scratch on the surface. the knobs fit but the white lines are turned 90 |
| Janyce Henningson 10.01.2013 | I believe someone said they go on but the white line doesn't face the correct way - but not 100% on that... Might've been K2 they were on about.. |
| Dick Korus 10.01.2013 | I know for a fact they don't fit on a k2, don't know if it helps, but its Allen and Heath so might be similar. |
| Cole Maroto 10.01.2013 |
Originally Posted by MYE
|
| Reena Erdei 10.01.2013 | Cheers for the clear response . . Some mixers listed had - NO - NO in the table (https://store.djranking s.com/chroma...=Chroma%2BCaps) That's why I asked as DJTT can't name every mixer / controller on the planet and needed some clarity from possible Allen & Heath owners . . |
| Bunny Sockel 10.01.2013 |
Originally Posted by Gribble
|
<< Back to General DiscussionReply