Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

ripping vinyl to garageband with audio 10 - what am I doing wrong?

Home :: Oldschool - vinyl and disc Djs topic :: ripping vinyl to garageband with audio 10 - what am I doing wrong?Reply

ripping vinyl to garageband with audio 10 - what am I doing wrong? Posted on: 29.10.2011 by Terese Marceau Hi all, I was in the process of ripping all my 12 inches from vinyl to MP3 with a firewire audio interface, now i have discarded that and am using audio 10 soundcard with TSP2 in my setup. however, Garageband doesn't seem to receive any sound. I have input and output set to Traktor audio 10 and monitor on, but no sound or soundwaves appear, does anyone know what I'm doing wrong? im obviously using direct thru from TSP2 to my mixer, and the only thing going from audio 10 to the laptop is the usb cable, I assumed this was enough? Hopefully i've listed all the info needed but if there's other info needed i'm missing let me know! Thanks in advance!
Dorie Scelzo 02.11.2011	I'm confused. Like
Terese Marceau 29.10.2011	Originally Posted by mostapha I don't use garage band, so take this with a grain of salt
Dorie Scelzo 29.10.2011	Originally Posted by Mad Abbott ops, not quite sorted - It doesn't seem possible to adjust the input volume level, so the recording is really really quiet. the volume slider is set to the minimum and is half greyed out so I cannot adjust it. I've tried adjusting the playing level in traktor, everything on my mixer yet nothing changes , ie waveform in garageband still way too low.... any ideas? thanks again I don't use garage band, so take this with a grain of salt
Neville Blackinton 02.11.2011	Originally Posted by R2D2 http://audacitydownload.y55.eu/ seriously fuck garage band Was going to post the same thing! Use Audacity to digitize your vinyl. And like others have said save in .wav format.
Dorie Scelzo 02.11.2011	I'm confused. Like
Terese Marceau 31.10.2011	Originally Posted by mostapha why would you need to move cables? because I was running vinyl as a thru in traktor...however couldnt adjust levels and it would be way too quiet in garageband. so just stopped using traktor and put an out from my mixer to the in on the audio 10 instead, and that way I could adjust levels.
Terese Marceau 29.10.2011	Originally Posted by mostapha I don't use garage band, so take this with a grain of salt
Halley Wurzer 29.10.2011	Originally Posted by R2D2 turntable dude :eek: wtf What's a "turntable"?
Dorie Scelzo 29.10.2011	Originally Posted by Mad Abbott ops, not quite sorted - It doesn't seem possible to adjust the input volume level, so the recording is really really quiet. the volume slider is set to the minimum and is half greyed out so I cannot adjust it. I've tried adjusting the playing level in traktor, everything on my mixer yet nothing changes , ie waveform in garageband still way too low.... any ideas? thanks again I don't use garage band, so take this with a grain of salt
Rolande Posso 30.10.2011	Originally Posted by Mad Abbott sorry if i'm a bit slow here, what does 'TT' refer to? thx turntable dude :eek: wtf
Terese Marceau 30.10.2011	Originally Posted by rgtb i know this isn't your main issue but do not route the TT through your mixer. instead, connect it to the TA10 directly. the mixer does nothing but adding noise (and coloring the signal). sorry if i'm a bit slow here, what does 'TT' refer to? thx
Terese Marceau 29.10.2011	Originally Posted by MaxOne Ummm, why aren't you using traktor to rip vinyl? Even if you haven't got tsp... Just wire mixer to an input on audio 10 and set up deck c or d to receive that input? hey Maxone, I had understood that was possible but you cant crop with that function, so if you miss the start or end you cant get rid of it? i suppose not really a problem as you would avoid playing it in traktor
Terese Marceau 29.10.2011	Hi all, I was in the process of ripping all my 12 inches from vinyl to MP3 with a firewire audio interface, now i have discarded that and am using audio 10 soundcard with TSP2 in my setup. however, Garageband doesn't seem to receive any sound. I have input and output set to Traktor audio 10 and monitor on, but no sound or soundwaves appear, does anyone know what I'm doing wrong? im obviously using direct thru from TSP2 to my mixer, and the only thing going from audio 10 to the laptop is the usb cable, I assumed this was enough? Hopefully i've listed all the info needed but if there's other info needed i'm missing let me know! Thanks in advance!
Dino Hapgood 02.11.2011	Why not just record in traktor and the cut and chop in a DAW as needed? You can't bring WAV files into garageband?
Neville Blackinton 02.11.2011	Originally Posted by R2D2 http://audacitydownload.y55.eu/ seriously fuck garage band Was going to post the same thing! Use Audacity to digitize your vinyl. And like others have said save in .wav format.
Dorie Scelzo 02.11.2011	I'm confused. Like
Terese Marceau 31.10.2011	Originally Posted by mostapha why would you need to move cables? because I was running vinyl as a thru in traktor...however couldnt adjust levels and it would be way too quiet in garageband. so just stopped using traktor and put an out from my mixer to the in on the audio 10 instead, and that way I could adjust levels.
Dorie Scelzo 31.10.2011	why would you need to move cables?
Terese Marceau 29.10.2011	Originally Posted by mostapha I don't use garage band, so take this with a grain of salt
Terese Marceau 29.10.2011	lol yeah yeah
Freddie Henrichs 29.10.2011	Audi TT.
Halley Wurzer 29.10.2011	Originally Posted by R2D2 turntable dude :eek: wtf What's a "turntable"?
Dorie Scelzo 29.10.2011	Originally Posted by Mad Abbott ops, not quite sorted - It doesn't seem possible to adjust the input volume level, so the recording is really really quiet. the volume slider is set to the minimum and is half greyed out so I cannot adjust it. I've tried adjusting the playing level in traktor, everything on my mixer yet nothing changes , ie waveform in garageband still way too low.... any ideas? thanks again I don't use garage band, so take this with a grain of salt
Rolande Posso 30.10.2011	Originally Posted by Mad Abbott sorry if i'm a bit slow here, what does 'TT' refer to? thx turntable dude :eek: wtf
Rolande Posso 30.10.2011	http://audacitydownload.y55.eu/ seriously fuck garage band
Terese Marceau 30.10.2011	Originally Posted by rgtb i know this isn't your main issue but do not route the TT through your mixer. instead, connect it to the TA10 directly. the mixer does nothing but adding noise (and coloring the signal). sorry if i'm a bit slow here, what does 'TT' refer to? thx
Terese Marceau 29.10.2011	Originally Posted by MaxOne Ummm, why aren't you using traktor to rip vinyl? Even if you haven't got tsp... Just wire mixer to an input on audio 10 and set up deck c or d to receive that input? hey Maxone, I had understood that was possible but you cant crop with that function, so if you miss the start or end you cant get rid of it? i suppose not really a problem as you would avoid playing it in traktor
Kesha Orde 29.10.2011	Also, rip them to wav, not mp3. You can keep the wavs as backup and convert to mp3 to play if you want afterwards.
Ngan Ernestine 29.10.2011	i know this isn't your main issue but do not route the TT through your mixer. instead, connect it to the TA10 directly. the mixer does nothing but adding noise (and coloring the signal).
Hipolito Scionti 29.10.2011	Ummm, why aren't you using traktor to rip vinyl? Even if you haven't got tsp... Just wire mixer to an input on audio 10 and set up deck c or d to receive that input?
Terese Marceau 29.10.2011	ops, not quite sorted - It doesn't seem possible to adjust the input volume level, so the recording is really really quiet. the volume slider is set to the minimum and is half greyed out so I cannot adjust it. I've tried adjusting the playing level in traktor, everything on my mixer yet nothing changes , ie waveform in garageband still way too low.... any ideas? thanks again
Terese Marceau 29.10.2011	ok just tried something that I hadn't tried before posting because i didnt believe it would make any difference, but in garageband I changed the input from channels 1+2 to 3+4, and now it works! strange as I was sure I would only have been using channels 1+2... hope I didn't waste anyone's time!

<< Back to Oldschool - vinyl and disc Djs topic Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Slovenia is:

ripping vinyl to garageband with audio 10 - what am I doing wrong?