Very low volume. Technic 1210MK3D
Very low volume. Technic 1210MK3D Posted on: 08.01.2012 by Luella Mckenrick Hi i just picked up a second hand pair of 1210MK3D they came in almost new condition, everything is working fine with my serato box except, one of my turntables has almost completely dropped the sound from the left channel (you can hear it, it's just very low in volume). Now i have cleaned the tone arm contacts, re-soldered the rca cables and soldered new cable also, but the problem still persists. I'm now believeing something wrong with the tone arm itself? Anybody ever had this problem? What did you do to fix it? Any help would be greatly appreciated. | |
| Takisha Daugherty 08.01.2012 |
Originally Posted by MLT
|
| Luella Mckenrick 08.01.2012 |
Originally Posted by xombiexplox
|
| Micaela Scherbert 08.01.2012 |
Originally Posted by MLT
that's what i'd recommend. first hook your bad deck directly to the phono input on channel 2 and play the time code. tone = good. if it's still super quiet, hook the bad deck up to channel 1 and test again. |
| Luella Mckenrick 08.01.2012 | Hi i just picked up a second hand pair of 1210MK3D they came in almost new condition, everything is working fine with my serato box except, one of my turntables has almost completely dropped the sound from the left channel (you can hear it, it's just very low in volume). Now i have cleaned the tone arm contacts, re-soldered the rca cables and soldered new cable also, but the problem still persists. I'm now believeing something wrong with the tone arm itself? Anybody ever had this problem? What did you do to fix it? Any help would be greatly appreciated. |
| Len Lukawski 08.01.2012 | Ch 1 and Ch 2 will [almost] always have been used when the mixer was being used in the past. Ch 3 may have seen no action whatsoever. Judging by the looks of the unit (on google) it seems there are only 4 or screws to remove the face plate. Pull that off and go in with a can of compressed air and try clean all of the line faders. If it's been sat, you might want to go and do the same for the crossfader while you're at it. If that solved the problem - bingo. The next step would be to use a contact cleaner like Dexoit or whatever you can get hold of. |
| Takisha Daugherty 08.01.2012 | But anyway, good luck fixing it :[ sorry it's giving you problems |
| Takisha Daugherty 08.01.2012 |
Originally Posted by MLT
|
| Luella Mckenrick 08.01.2012 |
Originally Posted by xombiexplox
|
| Takisha Daugherty 08.01.2012 | I remember a while back on my old M3D the sound just stopped on the left channel. I spent WEEKS browsing community
s trying to figure it out and then I gave up. Fast forward a few months, I step on my last M447 so I go to take out the one on the M3D and throw it on my M5G and I notice my left channel doesn't have sound.... ...turns out my headshell wires for the left channel came loose -_____- |
| Luella Mckenrick 08.01.2012 | Ok so it's not actually the Box or the Turntables but the mixer it seems, on channel one i only get the right channel same on channel 2, but on channel 3 everything is fine loud and clear, i cant test it on channel 4 since its both line inputs. I got the mixer from my dad he's had it on his loft a long time but he tells me its barely been used. The mixer is a Vestax PCM-15 MKII, i cant seem to figure out what is different from channels 1&2 and channel 3. |
| Romelia Stankard 08.01.2012 | See what happens through the mixer and look at the meter. One of the pre-amps on my audio 8 died too and the same thing happened. I don't feel like getting a new soundcard and I use it mostly at home so I bought this $20 mini phono preamp. [ame="http://www.amazon.com/Behringer-PP400-Ultra-Compact-Phono-Preamp/dp/B000H2BC4E/ref=sr_1_1?ie=UTF8&qid=1326045930&sr=8-1"]Amazon.com: Behringer PP400 Ultra-Compact Phono Preamp: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41E3FtHTLaL.@@AMEPARAM@@41E3FtHTLaL[/ame] |
| Nella Libin 09.01.2012 | Tones. Any kind of tones All types of tones just hypnotones Not the ones that make you moan and groan But the ones that keep you dancin' |
| Micaela Scherbert 08.01.2012 |
Originally Posted by MLT
that's what i'd recommend. first hook your bad deck directly to the phono input on channel 2 and play the time code. tone = good. if it's still super quiet, hook the bad deck up to channel 1 and test again. |
| Luella Mckenrick 08.01.2012 | All I have on my currently are 4 serato timecode so unable to test this out, going to pop out and pick up some of my vinyl and give it a go. I'll report back shortly. |
| Len Lukawski 08.01.2012 | What happens if you take the box out of the equation altogether and use the mixer with straight vinyl? |
| Luella Mckenrick 08.01.2012 | On a slightly different note, has anybody here ever had to dismantle a serato box before? |
| Luella Mckenrick 08.01.2012 | Yes tried swapping them over same issue, I swapped over the phono cables to the other turntable and had the same issue so I'm believeing it's actually a problem with the box itself, I didn't even consider this as an option. I'll have to open it up later to see if anything is wrong. |
| Len Lukawski 08.01.2012 | Gonna ask the dumb question first. Have you ruled out the Serato box as an issue? Also, have you tried swapping the needles/carts over to rule them out? |
<< Back to Oldschool - vinyl and disc Djs topicReply