S4 Xone EQ
S4 Xone EQ Posted on: 20.11.2011 by Lynetta Stanislav Does anyone use the Xone EQ type with the mid/low and mid/high eqs and which knob do you use to control the extra mid .Cheers Neil | |
| Lynetta Stanislav 27.11.2011 | Thanks so I just use the add button then import it on top of the IG mapping , how many maps can you have working at the same time. |
| Karolis Petrauskas 27.11.2011 | Yes it will work with the IG mapping. |
| Lynetta Stanislav 27.11.2011 | Will try again tomorrow , will this map work with a midifighter IG mapping. Cheers Neil |
| Karolis Petrauskas 27.11.2011 | @Neil. Yes both mid knobs should turn. Make sure you have you S4 selected in the mapping I uploaded. |
| Jaclyn Minjarez 27.11.2011 | Thanks alot bigbeatzz, I just downloaded this and will give it a play when I get home this week, but wanting to use that eq for sometime, but lack of free time had held me back from doing a mapping. Now you made an easy solution for my laziness! |
| Karolis Petrauskas 27.11.2011 | I'm glad it worked for you...It really does make a difference. When that sub bass kicks in it's so so good. |
| Lynetta Stanislav 27.11.2011 | Downloaded the tsi then upload to traktor , when you turn the mid knob on the s4 should both the mids move on the laptop screen as only one is moving. |
| Melvina Tubergen 27.11.2011 | it work great i try it last evening @ the club what a difference thanks |
| Lynetta Stanislav 26.11.2011 | Will down load this later and give it a go cheers . Neil |
| Karolis Petrauskas 26.11.2011 | If you search around I believe you'll find one that's done already. To be honest, I really don't have the time to map it. I just posted this one to share. |
| Elliot Dunphy 26.11.2011 | Can you also map it so I can use the filter as the LOW? I don't really use the filter anyway.. plus I could theoretically just set the filter on one of the FX panes. |
| Karolis Petrauskas 26.11.2011 | Cool, like I said it's super basic but allows you to utilize the xone eq and still retain the filter. Edit: POST 700. |
| Elliot Dunphy 26.11.2011 | Just downloaded the TSI, I'll give a run through when I get home toevening . |
| Karolis Petrauskas 26.11.2011 | Here is the mapping I made, it's super simple. Just put your eq in xone mode in the settings. Then go to: 1 - controller manager 2 - add 3 - import 4 - enjoy The mid knob now controls mid and low mid. You may not notice the difference but I have excellent monitors and the difference is very noticeable. |
| Kecia Wnukowski 26.11.2011 |
Well, I mean if someone could remap everything to it's default setting and just mapped the filter to be a LOW. I've tried this but I can't get the LEDs to display properly or the GAIN to be the filter.
Also, I wanted to set it so when shit+GAIN CLICK turned the filter on and off, so theoretically I could have the filter parameter set and be able to come in and out of it. |
| Elliot Dunphy 26.11.2011 | Well, I mean if someone could remap everything to it's default setting and just mapped the filter to be a LOW. I've tried this but I can't get the LEDs to display properly or the GAIN to be the filter. Also, I wanted to set it so when shit+GAIN CLICK turned the filter on and off, so theoretically I could have the filter parameter set and be able to come in and out of it. |
| Kecia Wnukowski 26.11.2011 |
I was looking to do something similar to this, but I wanted to use the filter knob as the LOW knob and something like shift+gain for the filter.
|
| Elliot Dunphy 26.11.2011 | I was looking to do something similar to this, but I wanted to use the filter knob as the LOW knob and something like shift+gain for the filter. Right now I'm using the P600 mixer option and setting the filter to drop out the sub bass. I've played with a light custom mapping for the EQ and prefer the Xone over the other ones. If anyone finds a way to make a custom TSI using the filter knob as the LOW and everything displayed and used normally, please post. |
| Lynetta Stanislav 25.11.2011 | Bigbeatzz when will you post the tsi for the Xone EQ , cheers Neil |
| Karolis Petrauskas 22.11.2011 | I will try and post up a TSI laster toevening . |
| Lynetta Stanislav 22.11.2011 | can u tell me how to do it . cheers neil |
| Karolis Petrauskas 22.11.2011 | I have it mapped so both mids are attached to the mid knob. The reason I chose the Xone EQ is because when you drop the bass the mids sound much cleaner than the Ecler EQ. With the others some of the mid bass drops when you turn the lows down. I prefer a nice punchy sound when I'm in the mix. |
| Lynetta Stanislav 23.11.2011 | Cheers for the reply , will go back to one of the other eqs not got to the stage where I can do the mapping. |
| Kecia Wnukowski 21.11.2011 | The s4 isn't made for that. Most logical answer would be to use the filter knobs (why are you asking that, there aren't many knobs on the s4....). But you can't really do it with the embedded mapping as you won't be able to block the movement of the filter knobs to control the filter (unless you block it to a defined value (or you can cumulate both mids on the mid knobs, but that's a 'meh' solution, what's the point if you want to use the xone eq?). Otherwise you drop the native mapping and make a custom one either in HID mode or midi mode (using all 3 knobs and filter knobs for the Xone Eq and use the jogwheel to control the filter for a given deck). |
| Len Lukawski 21.11.2011 | I would like to see someone respond to this too. If not I will go back to the Oracle |
| Lynetta Stanislav 21.11.2011 | Does anyone use the Xone EQ ? |
<< Back to NI - Native Instruments S4/S2 Controller talkReply