RCA output in Kontrol s4

Home :: NI - Native Instruments S4/S2 Controller talk :: RCA output in Kontrol s4Reply
RCA output in Kontrol s4
Posted on: 09.12.2010 by Rosario Byro
Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
nayit ruiz jaramillo
14.12.2010
Originally Posted by photojojo
Sorry, have to ask. Are you sure you're connecting to the RCA outs?
... and not Channel D inputs...


Both Output pairs are live so there should be sound from both all the time.
Liliana Stath
13.12.2010
Originally Posted by hacksics
I checked everything. funny thing is that I have signal on 1/4" output not in RCA.

I'll check it toevening as well to make sure I did not miss anything.

Thanks for the help guys. All of you


let me know if you fix it.
Rosario Byro
14.12.2010
Originally Posted by Robotears
first off was there music playing?
second is your filter and eq all zeroed out.
third, check your crossfader,
then check your upfaders,
then check your main gain,
then check your output routing to makesure it did not get screwed up
if none of these fix it then i have no idea what is wrong.
I checked everything. funny thing is that I have signal on 1/4" output not in RCA.

I'll check it toevening as well to make sure I did not miss anything.

Thanks for the help guys. All of you
Carlee Pickard
11.12.2010
Originally Posted by hacksics
Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
Do what Robotears said, but if I remember right the manual actually is very helpful for this! I had the same problem with mine initially, then I went through the manual step by step and notice I just messed up and forgot some dumb like knob somewhere that I had to adjust or something.

Basically if his checklist doesn't work, try the manual .
Liliana Stath
11.12.2010
Originally Posted by hacksics
Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
first off was there music playing?
second is your filter and eq all zeroed out.
third, check your crossfader,
then check your upfaders,
then check your main gain,
then check your output routing to makesure it did not get screwed up
if none of these fix it then i have no idea what is wrong.
Rosario Byro
09.12.2010		Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
Kandi Odom
04.04.2012		I am having the same problem wich trs to rca cable should i buy?
nayit ruiz jaramillo
14.12.2010
Originally Posted by photojojo
Sorry, have to ask. Are you sure you're connecting to the RCA outs?
... and not Channel D inputs...


Both Output pairs are live so there should be sound from both all the time.
Leeanna Ayla
14.12.2010		Sorry, have to ask. Are you sure you're connecting to the RCA outs?
Liliana Stath
13.12.2010
Originally Posted by hacksics
I checked everything. funny thing is that I have signal on 1/4" output not in RCA.

I'll check it toevening as well to make sure I did not miss anything.

Thanks for the help guys. All of you


let me know if you fix it.
Rosario Byro
14.12.2010
Originally Posted by Robotears
first off was there music playing?
second is your filter and eq all zeroed out.
third, check your crossfader,
then check your upfaders,
then check your main gain,
then check your output routing to makesure it did not get screwed up
if none of these fix it then i have no idea what is wrong.
I checked everything. funny thing is that I have signal on 1/4" output not in RCA.

I'll check it toevening as well to make sure I did not miss anything.

Thanks for the help guys. All of you
Leeanna Ayla
11.12.2010		check that your cue mix knob on the controller is all the way to the right.
Carlee Pickard
11.12.2010
Originally Posted by hacksics
Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
Do what Robotears said, but if I remember right the manual actually is very helpful for this! I had the same problem with mine initially, then I went through the manual step by step and notice I just messed up and forgot some dumb like knob somewhere that I had to adjust or something.

Basically if his checklist doesn't work, try the manual .
Liliana Stath
11.12.2010
Originally Posted by hacksics
Hi Guys,

I just tried connecting RCA output cables to my stereo but no sound came out. However I can confirm 1/4 balanced ones are working fine.

Did I miss something here?

Can you guys help me with this?

Thanks
first off was there music playing?
second is your filter and eq all zeroed out.
third, check your crossfader,
then check your upfaders,
then check your main gain,
then check your output routing to makesure it did not get screwed up
if none of these fix it then i have no idea what is wrong.
Mandy Lupone
10.12.2010		hey, im a noob when it comes to traktor, but have you checked the output settings in the traktor software?

<< Back to NI - Native Instruments S4/S2 Controller talkReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy