Fader problem quick fix WORKS!
Fader problem quick fix WORKS! Posted on: 18.04.2012 by Emilio Janz Looks like a lot of you are having the same fader problem as myself(fader moving down 15-25% on it's own). If you watch the midi signal button when this is happening it blinks meaning a signal is still being sent to your laptop, in other words a Hardware problem, there seems to be a short in the circuit when the fader reaches the top of it's throw.A fix for this until you have time to send the S4 back, (at the moment i haven't) which stops the problem 100% is to tape a small piece of a rubber band to the top of the fader and let it hang a few millimetres INTO the fader slot, this acts as a rubber buffer and stops the 'short' which is causing the fader to move. If you watch the fader position on screen it still reaches the top meaning no loss of volume. It even seems to improve the feel of the fader because you get a slight bounce as the fader hits full throw. give it a go IT WORKS. | |
Emilio Janz 18.04.2012 | Looks like a lot of you are having the same fader problem as myself(fader moving down 15-25% on it's own). If you watch the midi signal button when this is happening it blinks meaning a signal is still being sent to your laptop, in other words a Hardware problem, there seems to be a short in the circuit when the fader reaches the top of it's throw. A fix for this until you have time to send the S4 back, (at the moment i haven't) which stops the problem 100% is to tape a small piece of a rubber band to the top of the fader and let it hang a few millimetres INTO the fader slot, this acts as a rubber buffer and stops the 'short' which is causing the fader to move. If you watch the fader position on screen it still reaches the top meaning no loss of volume. It even seems to improve the feel of the fader because you get a slight bounce as the fader hits full throw. give it a go IT WORKS. |
Kizzy Dienhart 08.02.2013 | http://community .djranking s.com/showthr...l=1#post584327 |
Brunilda Kora 02.02.2013 | Ghetto fix! |
Emilio Janz 02.02.2013 | Just an update, i haven't had time to get the faders repaired but as of today they are still working 100% with this fix. Absolutely no more problems so i believe it is just the top of the throw that causes errors. |
<< Back to NI - Native Instruments S4/S2 Controller talkReply