Maschine as Livedeck with Audio8 and external Mixer?!?
Maschine as Livedeck with Audio8 and external Mixer?!? Posted on: 19.02.2013 by Jenine Fredette Hi All,I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don | |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 |
Originally Posted by makar1
This Tutorial I have read over and over and over But this Tutorial only shows how you can route all DECKS from Traktor in the Maschine. But there I cant find anything about Maschine route in a TrackDeck in Traktor. If i believe again regarding the mix recording problem... its not a problem |
| Jenine Fredette 19.02.2013 |
Originally Posted by makar1
yes i want to use the FX from traktor on the maschine- also I want to map the play button (for LiveDeck) that I can start/stop the maschin playing cause if I sync up the maschine the play button isnt available. Do you know how I can route it ? That I have DeckA&B (trackdecks) on separate mixer channel and maschin on a 3rd extra mixer channle but routet through traktor ? |
| Jenine Fredette 19.02.2013 | Hi All, I have a Macbook, Audio8,X1,external Mixer and newly I have a Maschine. So my actually Setup is I use 2 TrackDecks (A&B) which goes to A=output 1/2 (on the A8 from there with a Cable to the Mixer Channel1) , B=output 3/4 (on the A8 from there with a Cable to the Mixer Channel2) Im am controlling the 2 Track Decks with my X1. Now I want following: The sound from the Maschine should be routed in a the LiveDeckC and from there to the out ports 5/6 on the A8 and with a cable in the Mixer Channel3 I know that I must use JackOSX for this setup. But I don |
| Jenine Fredette 19.02.2013 |
Originally Posted by makar1
This Tutorial I have read over and over and over But this Tutorial only shows how you can route all DECKS from Traktor in the Maschine. But there I cant find anything about Maschine route in a TrackDeck in Traktor. If i believe again regarding the mix recording problem... its not a problem |
| Alphonso Deitchman 19.02.2013 | There's a detailed tutorial on Traktor Bible explaining all about joining Traktor and Maschine using JackOSX http://www.traktorbible.com/en/t2_maschine_ta10.aspx What problems were you having with recording your mix? |
| Jenine Fredette 19.02.2013 |
Originally Posted by makar1
yes i want to use the FX from traktor on the maschine- also I want to map the play button (for LiveDeck) that I can start/stop the maschin playing cause if I sync up the maschine the play button isnt available. Do you know how I can route it ? That I have DeckA&B (trackdecks) on separate mixer channel and maschin on a 3rd extra mixer channle but routet through traktor ? |
| Alphonso Deitchman 19.02.2013 | Are you routing Maschine through a Traktor deck so you can use FX? You could always just send it straight to your external mixer to free up your decks. And you still seem to have 3 sets of unused inputs - what's stopping you from recording the mix? |
<< Back to General DiscussionReply