MixTrack Pro w/ 2 turntables...

Home :: General Discussion :: MixTrack Pro w/ 2 turntables...Reply
MixTrack Pro w/ 2 turntables...
Posted on: 02.04.2013 by Ingrid Skelnik
Is it possible to use the mixtrack pro as the mixer of two turntables using an audio interface like A6/10?

Had a faulty numark x6 sent to me so exploring other options. I know the S4 is fitted for this type of thing but just curious if the mixtrack pro can do it some way too..

thanks!
Ingrid Skelnik
05.04.2013
Originally Posted by DjLiquitATL
Issue with that us that the mix track pro is a 2 channel midi controller... You could midi assign the middle fader to control the gain of c/d... I would suggest using one or the other... Use the midi for when someone doesn't want to pay you a lot for a gig... Don't lug the ttables out for a $200 gig... Use the midi instead

It is always wise to have a analog mixer for emergencies and so you can have a line input setup for request via iPod/mp3 player when people ask for song you never heard of
Great info and tips for me there, thanks alot.
Federico Vilas
04.04.2013
Originally Posted by kshook
Have an A6 with license on the way



Could i control decks 1 & 2 on turntables then 3 and 4 on the mix track pro also?
Issue with that us that the mix track pro is a 2 channel midi controller... You could midi assign the middle fader to control the gain of c/d... I would suggest using one or the other... Use the midi for when someone doesn't want to pay you a lot for a gig... Don't lug the ttables out for a $200 gig... Use the midi instead

It is always wise to have a analog mixer for emergencies and so you can have a line input setup for request via iPod/mp3 player when people ask for song you never heard of
Ingrid Skelnik
04.04.2013
Originally Posted by lethal_pizzle
Yes it's possible. I used to use an audio8 with Tech12's and a VCI to mix with TSPro. You'd use the audio6/10's outputs instead of the Mixtrack. You'd obviously need a scratch license.
Have an A6 with license on the way

Originally Posted by DjLiquitATL
I misread the question above... you would just set the audio options to internal... I would still route the audio outputs to the audio 6 directly and just map out the mixtrak as a midi controller only... I would map out the jog wheels for something like...fx...dry/wet
Could i control decks 1 & 2 on turntables then 3 and 4 on the mix track pro also?
Cole Maroto
03.04.2013
Originally Posted by DjLiquitATL
numark_mixtrackpro_back_lg-624x390.jpg

cannot be done without...INPUTS
The audio 6/10 has the inputs. The mixtrack would just be a midi controller.
Federico Vilas
03.04.2013
Originally Posted by Steve Zorilow
Yup it's doable. It's all about mapping and settings
numark_mixtrackpro_back_lg-624x390.jpg

cannot be done without...INPUTS
Ingrid Skelnik
02.04.2013		Is it possible to use the mixtrack pro as the mixer of two turntables using an audio interface like A6/10?

Had a faulty numark x6 sent to me so exploring other options. I know the S4 is fitted for this type of thing but just curious if the mixtrack pro can do it some way too..

thanks!
Federico Vilas
05.04.2013		i've got a LPD8 for $40.00 shipped that I just bought and no longer need if you want it PM...it works great along with the mixtrack pro...they recently had a promotion for them together. It will be posted on the buy/sell community once they "approve" it
Ingrid Skelnik
05.04.2013
Originally Posted by DjLiquitATL
Issue with that us that the mix track pro is a 2 channel midi controller... You could midi assign the middle fader to control the gain of c/d... I would suggest using one or the other... Use the midi for when someone doesn't want to pay you a lot for a gig... Don't lug the ttables out for a $200 gig... Use the midi instead

It is always wise to have a analog mixer for emergencies and so you can have a line input setup for request via iPod/mp3 player when people ask for song you never heard of
Great info and tips for me there, thanks alot.
Federico Vilas
04.04.2013
Originally Posted by kshook
Have an A6 with license on the way



Could i control decks 1 & 2 on turntables then 3 and 4 on the mix track pro also?
Issue with that us that the mix track pro is a 2 channel midi controller... You could midi assign the middle fader to control the gain of c/d... I would suggest using one or the other... Use the midi for when someone doesn't want to pay you a lot for a gig... Don't lug the ttables out for a $200 gig... Use the midi instead

It is always wise to have a analog mixer for emergencies and so you can have a line input setup for request via iPod/mp3 player when people ask for song you never heard of
Ingrid Skelnik
04.04.2013
Originally Posted by lethal_pizzle
Yes it's possible. I used to use an audio8 with Tech12's and a VCI to mix with TSPro. You'd use the audio6/10's outputs instead of the Mixtrack. You'd obviously need a scratch license.
Have an A6 with license on the way

Originally Posted by DjLiquitATL
I misread the question above... you would just set the audio options to internal... I would still route the audio outputs to the audio 6 directly and just map out the mixtrak as a midi controller only... I would map out the jog wheels for something like...fx...dry/wet
Could i control decks 1 & 2 on turntables then 3 and 4 on the mix track pro also?
Federico Vilas
04.04.2013		I misread the question above... you would just set the audio options to internal... I would still route the audio outputs to the audio 6 directly and just map out the mixtrak as a midi controller only... I would map out the jog wheels for something like...fx...dry/wet
Marshall Aby
03.04.2013		Yes it's possible. I used to use an audio8 with Tech12's and a VCI to mix with TSPro. You'd use the audio6/10's outputs instead of the Mixtrack. You'd obviously need a scratch license.
Augustine Mitzen
03.04.2013		-- i know jack shit about digital djing so this is a mere hypothesis --

i assume he meant he wants to play vinyl, for which he'd need inputs to plug into the mixtrack, BUT... is it possible to route the Audio through the A6 and control the internal mixer using the MTP?

could work in theory
Cole Maroto
03.04.2013
Originally Posted by DjLiquitATL
numark_mixtrackpro_back_lg-624x390.jpg

cannot be done without...INPUTS
The audio 6/10 has the inputs. The mixtrack would just be a midi controller.
Federico Vilas
03.04.2013
Originally Posted by Steve Zorilow
Yup it's doable. It's all about mapping and settings
numark_mixtrackpro_back_lg-624x390.jpg

cannot be done without...INPUTS
Lisa Lochotzki
02.04.2013		Yup it's doable. It's all about mapping and settings

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy