Top genres

Top 7 of 21 genres

Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

Top countries

Top 7 of 108 countries

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

The best DJ in Jordan is:

FLAVA

Who is the best DJ in Australia?
Click to find out

Calvin Harris
and Dillon Francis
worked there... no way!

Behringer DDM4000 midi to usb cable, advice needed

Home :: General Discussion :: Behringer DDM4000 midi to usb cable, advice neededReply

Behringer DDM4000 midi to usb cable, advice needed Posted on: 02.04.2013 by Nathanial Bussmann Hi there, I recently bought a Behringer DDM4000 and the midi to usb cable I received with it doesn't work. Whether that is because its faulty or not compatible with the mixer I don't know. Here is the cable I have: http://www.amazon.co.uk/Keyboard-Int...4835465&sr=8-3 What I'm trying to determine is what sort of midi to usb cable will work with my mixer and how much do I have to spend? Any advice would be much appreciated, Thank you.
Nathanial Bussmann 06.04.2013	Originally Posted by makar1 Have you set the correct I/O ports in the Controller Manager? Nice one! it works fine now, thanks so much for that, it was driving me mad!
Nathanial Bussmann 04.04.2013	Originally Posted by DJ Asand ^This. I used one of these: http://www.zzounds.com/item--MDOUNO m-audio midi sport uno. all cables are interchangeable. make sure the MIDI IN is going into the MIDI OUT of your mixer. Tryed that, light on the adaptor is coming on when pressing buttons on mixer so signal is definitely being received but traktor isnt responding to it for some reason...
Ralph Alderette 02.04.2013	Originally Posted by makar1 Also the connectors on that adapter are confusing - I believe IN connects to OUT on your mixer and vice versa. ^This. I used one of these: http://www.zzounds.com/item--MDOUNO m-audio midi sport uno. all cables are interchangeable. make sure the MIDI IN is going into the MIDI OUT of your mixer.
Nathanial Bussmann 02.04.2013	Originally Posted by makar1 I have that MIDI adapter and it works fine for my keyboard. Only when plugged directly into the computer though, rather than through a hub. Is there something you have to enable on the DDM for it to send MIDI? Also the connectors on that adapter are confusing - I believe IN connects to OUT on your mixer and vice versa. Dont believe anything has to be enabled, tryed using a friends cable and that worked fine so i reckon its just a dud cable. No worries
Nathanial Bussmann 01.04.2013	Originally Posted by Patch It's possible that you just got a dud cable. if you've used one that works, just buy one like that. Cool, thanks for ur help
Nathanial Bussmann 01.04.2013	Originally Posted by Patch That's all you should need. Download this and check to see if any midi is getting INTO your computer from the DDM4K: http://www.midiox.com/ Ok, checked that, lights coming on on the cable itself but no input from the mixer. Iv tried using a friends cable and I had no issues with that, everything worked fine so I reckon theres a problem with the cable im stuck with. Question now is, what sort of cable do I need to get? Are all midi usb cables interchangeable with all mixers or do certain mixers require a certain cables with different capabilities?
Nathanial Bussmann 02.04.2013	Hi there, I recently bought a Behringer DDM4000 and the midi to usb cable I received with it doesn't work. Whether that is because its faulty or not compatible with the mixer I don't know. Here is the cable I have: http://www.amazon.co.uk/Keyboard-Int...4835465&sr=8-3 What I'm trying to determine is what sort of midi to usb cable will work with my mixer and how much do I have to spend? Any advice would be much appreciated, Thank you.
Nathanial Bussmann 06.04.2013	Originally Posted by makar1 Have you set the correct I/O ports in the Controller Manager? Nice one! it works fine now, thanks so much for that, it was driving me mad!
Alphonso Deitchman 04.04.2013	Have you set the correct I/O ports in the Controller Manager?
Nathanial Bussmann 04.04.2013	Originally Posted by DJ Asand ^This. I used one of these: http://www.zzounds.com/item--MDOUNO m-audio midi sport uno. all cables are interchangeable. make sure the MIDI IN is going into the MIDI OUT of your mixer. Tryed that, light on the adaptor is coming on when pressing buttons on mixer so signal is definitely being received but traktor isnt responding to it for some reason...
Ralph Alderette 02.04.2013	Originally Posted by makar1 Also the connectors on that adapter are confusing - I believe IN connects to OUT on your mixer and vice versa. ^This. I used one of these: http://www.zzounds.com/item--MDOUNO m-audio midi sport uno. all cables are interchangeable. make sure the MIDI IN is going into the MIDI OUT of your mixer.
Nathanial Bussmann 02.04.2013	Originally Posted by makar1 I have that MIDI adapter and it works fine for my keyboard. Only when plugged directly into the computer though, rather than through a hub. Is there something you have to enable on the DDM for it to send MIDI? Also the connectors on that adapter are confusing - I believe IN connects to OUT on your mixer and vice versa. Dont believe anything has to be enabled, tryed using a friends cable and that worked fine so i reckon its just a dud cable. No worries
Alphonso Deitchman 01.04.2013	I have that MIDI adapter and it works fine for my keyboard. Only when plugged directly into the computer though, rather than through a hub. Is there something you have to enable on the DDM for it to send MIDI? Also the connectors on that adapter are confusing - I believe IN connects to OUT on your mixer and vice versa.
Nathanial Bussmann 01.04.2013	Originally Posted by Patch It's possible that you just got a dud cable. if you've used one that works, just buy one like that. Cool, thanks for ur help
Brunilda Kora 01.04.2013	It's possible that you just got a dud cable. if you've used one that works, just buy one like that.
Nathanial Bussmann 01.04.2013	Originally Posted by Patch That's all you should need. Download this and check to see if any midi is getting INTO your computer from the DDM4K: http://www.midiox.com/ Ok, checked that, lights coming on on the cable itself but no input from the mixer. Iv tried using a friends cable and I had no issues with that, everything worked fine so I reckon theres a problem with the cable im stuck with. Question now is, what sort of cable do I need to get? Are all midi usb cables interchangeable with all mixers or do certain mixers require a certain cables with different capabilities?
Brunilda Kora 02.04.2013	That's all you should need. Download this and check to see if any midi is getting INTO your computer from the DDM4K: http://www.midiox.com/

<< Back to General Discussion Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy