Traktor Scratch Pro, only one deck working properly
Traktor Scratch Pro, only one deck working properly Posted on: 20.04.2013 by Rosaria Holekamp I use Scratch Pro with vinyl, and only one deck seems to work properly.The left deck seems to often get stuck on this setting, and it's impossible to click to the icon on the right. http://i.imgur.com/oyCLGHx.png The track plays but doesn't respond well to the deck, so if I pull the vinyl back it speeds the deck up. Any ideas what's going on? I've swapped needles on both decks in case that was the problem but it still only happens on the left deck. Any help much appreciated. | |
| Jetta Drenzek 19.04.2013 |
Originally Posted by prettyconfused
|
| Rosaria Holekamp 20.04.2013 | I use Scratch Pro with vinyl, and only one deck seems to work properly. The left deck seems to often get stuck on this setting, and it's impossible to click to the icon on the right. http://i.imgur.com/oyCLGHx.png The track plays but doesn't respond well to the deck, so if I pull the vinyl back it speeds the deck up. Any ideas what's going on? I've swapped needles on both decks in case that was the problem but it still only happens on the left deck. Any help much appreciated. |
| Yong Aptekar 19.04.2013 | Grounds, RCAs, stylus connection, headshell connection those would be the first things to check. But you only need one working deck to scratch Wiggle the RCA connectors at your soundcard, see if that works. Switch decks A and B physically, and see if the problem follows the turntable. If it doesn't, might be your soundcard. |
| Addie Engbrecht 19.04.2013 | signal is messed....more than likely. check your rcas |
| Jetta Drenzek 19.04.2013 |
Originally Posted by prettyconfused
|
| Alphonso Deitchman 20.04.2013 | A screenshot of your timecode scopes would be useful. |
<< Back to General DiscussionReply