Xone 4D configuration and mappings
Xone 4D configuration and mappings Posted on: 02.06.2013 by Wilfredo Kiffmeyer Hi guysI have upgrade my setup and bought A&H xone 4D, but I'm having a lot of problems to set up everything. I use Mac and TSP 2.6. First thing I made was download the latest drivers and firmware. And after that I try to configure the outputs and inputs but everything that I try simple didn't work. I want to use 2 TT only and the other decks for remix decks. But all the configuration that I made the result was the same. With the internal output sound the mixer don't work all the mixer faders and knobs simple don't do anything With the external output I don't have external sound only on the phones, the mixer works, but the crossover don't work. This is normal with this mixer? This is very weird, I have unnistall all the drivers and TSP but it's the same. And other thing can anyone tell me a good and simple mapping to use? Thanks | |
Wilfredo Kiffmeyer 02.06.2013 |
Originally Posted by Ross
And I have one connect on channel 1 and the other on channel 2 And the sound even with the faders down still plays on the speakers Whats wrong with this... |
Wilfredo Kiffmeyer 02.06.2013 |
Originally Posted by Ross
test.jpg test1.jpg test2.jpg Its possible use this mixer with timecodes using the internal output? |
Wilfredo Kiffmeyer 02.06.2013 | Hi guys I have upgrade my setup and bought A&H xone 4D, but I'm having a lot of problems to set up everything. I use Mac and TSP 2.6. First thing I made was download the latest drivers and firmware. And after that I try to configure the outputs and inputs but everything that I try simple didn't work. I want to use 2 TT only and the other decks for remix decks. But all the configuration that I made the result was the same. With the internal output sound the mixer don't work all the mixer faders and knobs simple don't do anything With the external output I don't have external sound only on the phones, the mixer works, but the crossover don't work. This is normal with this mixer? This is very weird, I have unnistall all the drivers and TSP but it's the same. And other thing can anyone tell me a good and simple mapping to use? Thanks |
Annalisa Shogren 04.06.2013 | Try finding a map online and import it into Traktor. |
Wilfredo Kiffmeyer 03.06.2013 | Thanks Ross is almost everything working, now it's only some maps that didn't work. Thanks |
Wilfredo Kiffmeyer 02.06.2013 | The problem is in the output master, the channel out that I choose thats the one that we will play the music |
Wilfredo Kiffmeyer 02.06.2013 | I try to choose another input and connect the TT cable on other channel, but when music starts the music only play on channel 1 |
Annalisa Shogren 02.06.2013 | Also, have you set it to external mixing mode in preferences? |
Annalisa Shogren 02.06.2013 | Have you set it to different inputs in preferences to see if that works? |
Wilfredo Kiffmeyer 02.06.2013 |
Originally Posted by Ross
And I have one connect on channel 1 and the other on channel 2 And the sound even with the faders down still plays on the speakers Whats wrong with this... |
Annalisa Shogren 02.06.2013 | Are you already trying to use timecodes? Yes, it's Traktor Scratch certified. |
Wilfredo Kiffmeyer 02.06.2013 |
Originally Posted by Ross
test.jpg test1.jpg test2.jpg Its possible use this mixer with timecodes using the internal output? |
Annalisa Shogren 02.06.2013 | Can't read that, too small. |
Annalisa Shogren 02.06.2013 | What are your output settings in Traktor? |
<< Back to General DiscussionReply