Panic!
Panic! Posted on: 15.06.2013 by Mazie Murtagh Ok first thing first. I just bought a Traktor X1 and a Audio2 external soundcard. I use an macbook pro with Traktor pro. I just arrived at the the place and they hace Pioneer DJM-900 mixer. Here is the thing. I have connected everything. But the thing is that i cant cue music on the next song. I believe there is something wrong with my "output routing" settings. Anyone kind enough to help a fellow out? Kind Regards Jarl | |
| Augustine Mitzen 16.06.2013 |
Originally Posted by shahryz
|
| Mazie Murtagh 15.06.2013 | Ok first thing first. I just bought a Traktor X1 and a Audio2 external soundcard. I use an macbook pro with Traktor pro. I just arrived at the the place and they hace Pioneer DJM-900 mixer. Here is the thing. I have connected everything. But the thing is that i cant cue music on the next song. I believe there is something wrong with my "output routing" settings. Anyone kind enough to help a fellow out? Kind Regards Jarl |
| Sina Haggans 16.06.2013 | Sorry, I just assumed he was using four decks inside of traktor. But yeah if he's only using two decks then definitely mix externally. |
| Augustine Mitzen 16.06.2013 |
Originally Posted by shahryz
|
| Alphonso Deitchman 15.06.2013 | If you're using an X1, Audio 2, and external mixer you pretty much have to use External mode. Send Deck A from Output A to Channel 2, Deck B from Output B to Channel 3. |
| Sina Haggans 15.06.2013 | Easiest way to go about it is plug one channel from the audio 2 into one of the channels on the mixer, and use the other channel on the audio 2 for your headphones. Use traktor's internal mixer. Under output routing in settings put (eg. channel 1) in to the mixer, and channel 2 for monitoring. On the DJM put hi/mid/low on neutral and adjust gain accordingly. Good luck! |
| Addie Engbrecht 15.06.2013 | Download DJM 900 Nexus driver software http://pioneerdj.com/support/product...M-900NXS&t=111 . When its downloaded and running plug the usb cable back into your 900 mixer and computer. The Nexus set up utility will pop up. Just make sure the mixer ouput says "Post CH 1 Fader" for USB 1/2 and "Post CH 2 Fader" for USB 3/4 and so on down the line. Don't need to mess with any other settings. WHen you go into Traktor, Select the DJM 900 as your soundcard in AUdio settings. The only other adjustments are all made in Output Routing (You're mixing w/ the X1 only right? no turntables or CDJ's?). Mixing mode should be set to external. CH 1 on the mixer (order going left to right) is "OUT 1" and "OUT 2" , and channel 2 on the mixer is "OUT 3" and "OUT 4" and so on for the other 2 remaining channels 3 + 4 (5/6 , 7/8). So in output routing screen you see Traktor's Deck A routing, if you want Channel 1 on the mixer to receive the sound from Traktor's Deck A you would put in Out 1/2 , or if you want Channel 4 to receive the sound coming from Traktor's Deck A instead, you would select OUT 7/8. If you understand this, then you can finish the rest without instruction. |
| Leon Albornoz 15.06.2013 | If they have a DJM900 why are you using an Audio 2 in the first place? Just connect the mixer directly to usb on mac and use the built-in soundcard which is way better than audio 2. |
| Julissa Serrone 15.06.2013 | are you trying to cue on the DJM? If so. Then you are mixing externally (on the hardware mixer not "internal" that would be inside of traktor), output routing should be external and channels a and b routed to the audio 2. To Cue, just press the cue button on the mixer for each channel and turn up the volume on the bottom right of the mixer. If you are mixing internally, then it's a little different. One of you Audio 2 channels is set to master, the other to monitor and you plug your headphones into that output of your audio 2. |
| Latoria Kavulich 15.06.2013 | are you trying to mix internally? plug both outs of the A2 into channels on the mixer and you are good to go. |
<< Back to General DiscussionReply