Numark N4 Traktor Cue Problem

Home :: General Discussion :: Numark N4 Traktor Cue ProblemReply
Numark N4 Traktor Cue Problem
Posted on: 02.11.2012 by Keli Duson
Okay so I have a Numark N4 and I'm running it with Traktor Pro 2. I have the mapping that Numark gives on the product page of the N4. However, I ran into a problem. When I cue a track it plays out both my speakers which are set to master and my headphones which are set to monitors. I only want to hear the cue through my headphones, not my speakers. So basically I want the cue not to come out of the master, only the monitors. Any help is much appreciated. Thanks.
Chrissy Priest
11.09.2013
Originally Posted by stonersteve
The problem is not with the output routing, after several hours I found that this was turned to master in traktor itself. So the cue-signal the mixer received was correct, only that traktor was sending the master.

n4 headphones cue problem solved.jpg
I'm sorry i my English is not very clear..
Could you please explain me step by step how did you solve te problem?
I didn't understand :s
It would help me a lot.
Daniel Whitsel
24.01.2013		The problem is not with the output routing, after several hours I found that this was turned to master in traktor itself. So the cue-signal the mixer received was correct, only that traktor was sending the master.

n4 headphones cue problem solved.jpg
Keli Duson
03.11.2012
Originally Posted by jayo
Have you checked to see that the knob controlling the cue/master isn't set over to master?
Yeah, it's all the way over at cue.
Keli Duson
02.11.2012
Originally Posted by Josie
Make sure either the balanced outputs or RCA master output on the back of the N4 are connected to your speakers. Like before just check that the output in the Output routing tab is set to
Output monitor to 1 & 2
Output master to 3 & 4
Quit Traktor turn off N4
Now restart N4 and then Traktor
Still doesn't work... thanks for the suggestions though I really appreciate it.
Keli Duson
02.11.2012
Originally Posted by Josie
Also what output of N4 do you have connected to your speakers maybe you have them backwards so you set the output in the Output routing tab instead to
Output monitor to 1 & 2
Output master to 3 & 4
Nope it's set to Master 0&1 and Monitor is 2&3.
Keli Duson
02.11.2012
Originally Posted by DarioJ
What is the soundcard selected?
Soundcard is set to the N4 soundcard.
Keli Duson
02.11.2012
Originally Posted by Josie
Set mixing mode to internal under Output routing Tab
Output monitor to 3 & 4
Output master to 1 & 2
That is what I've had it set at, yet the problem still persists.
Keli Duson
02.11.2012		Okay so I have a Numark N4 and I'm running it with Traktor Pro 2. I have the mapping that Numark gives on the product page of the N4. However, I ran into a problem. When I cue a track it plays out both my speakers which are set to master and my headphones which are set to monitors. I only want to hear the cue through my headphones, not my speakers. So basically I want the cue not to come out of the master, only the monitors. Any help is much appreciated. Thanks.
Chrissy Priest
11.09.2013
Originally Posted by stonersteve
The problem is not with the output routing, after several hours I found that this was turned to master in traktor itself. So the cue-signal the mixer received was correct, only that traktor was sending the master.

n4 headphones cue problem solved.jpg
I'm sorry i my English is not very clear..
Could you please explain me step by step how did you solve te problem?
I didn't understand :s
It would help me a lot.
Daniel Whitsel
24.01.2013		The problem is not with the output routing, after several hours I found that this was turned to master in traktor itself. So the cue-signal the mixer received was correct, only that traktor was sending the master.

n4 headphones cue problem solved.jpg
Keli Duson
03.11.2012
Originally Posted by jayo
Have you checked to see that the knob controlling the cue/master isn't set over to master?
Yeah, it's all the way over at cue.
Evie Baghdasarian
03.11.2012		Have you checked to see that the knob controlling the cue/master isn't set over to master?
Keli Duson
02.11.2012
Originally Posted by Josie
Make sure either the balanced outputs or RCA master output on the back of the N4 are connected to your speakers. Like before just check that the output in the Output routing tab is set to
Output monitor to 1 & 2
Output master to 3 & 4
Quit Traktor turn off N4
Now restart N4 and then Traktor
Still doesn't work... thanks for the suggestions though I really appreciate it.
Daisy Mitri
02.11.2012		Make sure either the balanced outputs or RCA master output on the back of the N4 are connected to your speakers. Like before just check that the output in the Output routing tab is set to
Output monitor to 1 & 2
Output master to 3 & 4
Quit Traktor turn off N4
Now restart N4 and then Traktor
Keli Duson
02.11.2012
Originally Posted by Josie
Also what output of N4 do you have connected to your speakers maybe you have them backwards so you set the output in the Output routing tab instead to
Output monitor to 1 & 2
Output master to 3 & 4
Nope it's set to Master 0&1 and Monitor is 2&3.
Keli Duson
02.11.2012
Originally Posted by DarioJ
What is the soundcard selected?
Soundcard is set to the N4 soundcard.
Daisy Mitri
02.11.2012		Also what output of N4 do you have connected to your speakers maybe you have them backwards so you set the output in the Output routing tab instead to
Output monitor to 1 & 2
Output master to 3 & 4
Judi Sissel
02.11.2012		What is the soundcard selected?
Daisy Mitri
02.11.2012		Audio setup of course is set to N4?
Keli Duson
02.11.2012
Originally Posted by Josie
Set mixing mode to internal under Output routing Tab
Output monitor to 3 & 4
Output master to 1 & 2
That is what I've had it set at, yet the problem still persists.
Daisy Mitri
02.11.2012		Set mixing mode to internal under Output routing Tab
Output monitor to 3 & 4
Output master to 1 & 2

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy