Top genres

Top 7 of 21 genres

Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

Top countries

Top 7 of 108 countries

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

The best DJ in Lithuania is:

UNDER BLACK HELMET

Who is the best DJ in Puerto Rico?
Click to find out

Calvin Harris
and Dillon Francis
worked there... no way!

Very low volume. Technic 1210MK3D

Home :: Oldschool - vinyl and disc Djs topic :: Very low volume. Technic 1210MK3DReply

Very low volume. Technic 1210MK3D Posted on: 08.01.2012 by Luella Mckenrick Hi i just picked up a second hand pair of 1210MK3D they came in almost new condition, everything is working fine with my serato box except, one of my turntables has almost completely dropped the sound from the left channel (you can hear it, it's just very low in volume). Now i have cleaned the tone arm contacts, re-soldered the rca cables and soldered new cable also, but the problem still persists. I'm now believeing something wrong with the tone arm itself? Anybody ever had this problem? What did you do to fix it? Any help would be greatly appreciated.
Takisha Daugherty 08.01.2012	Originally Posted by MLT That doesn't appear to be my problem i don't believe as as they work fine in channel 3, and if i use a line input into channel 3 that's fine also, but a line input into channels 1&2 gives me the same result as the phono inputs where i can barely hear the left channel or not at all. I see, guess it's time for a new mixer! I'm in the same boat, I have a less-than-stellar Numark M3. Turns out you don't wanna try and buy cheap something that all your sound goes through!
Luella Mckenrick 08.01.2012	Originally Posted by xombiexplox I remember a while back on my old M3D the sound just stopped on the left channel. I spent WEEKS browsing community s trying to figure it out and then I gave up. Fast forward a few months, I step on my last M447 so I go to take out the one on the M3D and throw it on my M5G and I notice my left channel doesn't have sound.... ...turns out my headshell wires for the left channel came loose -_____- That doesn't appear to be my problem i don't believe as as they work fine in channel 3, and if i use a line input into channel 3 that's fine also, but a line input into channels 1&2 gives me the same result as the phono inputs where i can barely hear the left channel or not at all.
Micaela Scherbert 08.01.2012	Originally Posted by MLT All I have on my currently are 4 serato timecode so unable to test this out, going to pop out and pick up some of my vinyl and give it a go. I'll report back shortly. you can test with the time codes. you'll just hear a tone. that's what i'd recommend. first hook your bad deck directly to the phono input on channel 2 and play the time code. tone = good. if it's still super quiet, hook the bad deck up to channel 1 and test again.
Luella Mckenrick 08.01.2012	Hi i just picked up a second hand pair of 1210MK3D they came in almost new condition, everything is working fine with my serato box except, one of my turntables has almost completely dropped the sound from the left channel (you can hear it, it's just very low in volume). Now i have cleaned the tone arm contacts, re-soldered the rca cables and soldered new cable also, but the problem still persists. I'm now believeing something wrong with the tone arm itself? Anybody ever had this problem? What did you do to fix it? Any help would be greatly appreciated.
Len Lukawski 08.01.2012	Ch 1 and Ch 2 will [almost] always have been used when the mixer was being used in the past. Ch 3 may have seen no action whatsoever. Judging by the looks of the unit (on google) it seems there are only 4 or screws to remove the face plate. Pull that off and go in with a can of compressed air and try clean all of the line faders. If it's been sat, you might want to go and do the same for the crossfader while you're at it. If that solved the problem - bingo. The next step would be to use a contact cleaner like Dexoit or whatever you can get hold of.
Takisha Daugherty 08.01.2012	But anyway, good luck fixing it :[ sorry it's giving you problems
Takisha Daugherty 08.01.2012	Originally Posted by MLT That doesn't appear to be my problem i don't believe as as they work fine in channel 3, and if i use a line input into channel 3 that's fine also, but a line input into channels 1&2 gives me the same result as the phono inputs where i can barely hear the left channel or not at all. I see, guess it's time for a new mixer! I'm in the same boat, I have a less-than-stellar Numark M3. Turns out you don't wanna try and buy cheap something that all your sound goes through!
Luella Mckenrick 08.01.2012	Originally Posted by xombiexplox I remember a while back on my old M3D the sound just stopped on the left channel. I spent WEEKS browsing community s trying to figure it out and then I gave up. Fast forward a few months, I step on my last M447 so I go to take out the one on the M3D and throw it on my M5G and I notice my left channel doesn't have sound.... ...turns out my headshell wires for the left channel came loose -_____- That doesn't appear to be my problem i don't believe as as they work fine in channel 3, and if i use a line input into channel 3 that's fine also, but a line input into channels 1&2 gives me the same result as the phono inputs where i can barely hear the left channel or not at all.
Takisha Daugherty 08.01.2012	I remember a while back on my old M3D the sound just stopped on the left channel. I spent WEEKS browsing community s trying to figure it out and then I gave up. Fast forward a few months, I step on my last M447 so I go to take out the one on the M3D and throw it on my M5G and I notice my left channel doesn't have sound.... ...turns out my headshell wires for the left channel came loose -_____-
Luella Mckenrick 08.01.2012	Ok so it's not actually the Box or the Turntables but the mixer it seems, on channel one i only get the right channel same on channel 2, but on channel 3 everything is fine loud and clear, i cant test it on channel 4 since its both line inputs. I got the mixer from my dad he's had it on his loft a long time but he tells me its barely been used. The mixer is a Vestax PCM-15 MKII, i cant seem to figure out what is different from channels 1&2 and channel 3.
Romelia Stankard 08.01.2012	See what happens through the mixer and look at the meter. One of the pre-amps on my audio 8 died too and the same thing happened. I don't feel like getting a new soundcard and I use it mostly at home so I bought this $20 mini phono preamp. [ame="http://www.amazon.com/Behringer-PP400-Ultra-Compact-Phono-Preamp/dp/B000H2BC4E/ref=sr_1_1?ie=UTF8&qid=1326045930&sr=8-1"]Amazon.com: Behringer PP400 Ultra-Compact Phono Preamp: Musical Instruments@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41E3FtHTLaL.@@AMEPARAM@@41E3FtHTLaL[/ame]
Nella Libin 09.01.2012	Tones. Any kind of tones All types of tones just hypnotones Not the ones that make you moan and groan But the ones that keep you dancin'
Micaela Scherbert 08.01.2012	Originally Posted by MLT All I have on my currently are 4 serato timecode so unable to test this out, going to pop out and pick up some of my vinyl and give it a go. I'll report back shortly. you can test with the time codes. you'll just hear a tone. that's what i'd recommend. first hook your bad deck directly to the phono input on channel 2 and play the time code. tone = good. if it's still super quiet, hook the bad deck up to channel 1 and test again.
Luella Mckenrick 08.01.2012	All I have on my currently are 4 serato timecode so unable to test this out, going to pop out and pick up some of my vinyl and give it a go. I'll report back shortly.
Len Lukawski 08.01.2012	What happens if you take the box out of the equation altogether and use the mixer with straight vinyl?
Luella Mckenrick 08.01.2012	On a slightly different note, has anybody here ever had to dismantle a serato box before?
Luella Mckenrick 08.01.2012	Yes tried swapping them over same issue, I swapped over the phono cables to the other turntable and had the same issue so I'm believeing it's actually a problem with the box itself, I didn't even consider this as an option. I'll have to open it up later to see if anything is wrong.
Len Lukawski 08.01.2012	Gonna ask the dumb question first. Have you ruled out the Serato box as an issue? Also, have you tried swapping the needles/carts over to rule them out?

<< Back to Oldschool - vinyl and disc Djs topic Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy