Where do you set the main knob?
Where do you set the main knob? Posted on: 25.07.2011 by Geraldo Ottesen I usually set it at 12oclock and turn up the max possible volume on my pa speakers ,, wondering if there is another way to do things here, my question is where do you guys set your main knob? | |
| Geraldo Ottesen 25.07.2011 | I usually set it at 12oclock and turn up the max possible volume on my pa speakers ,, wondering if there is another way to do things here, my question is where do you guys set your main knob? |
| Jacquelyn Swiatkowski 25.07.2011 | ALL THE WAY UP!!!11! I usually set mine about 2-3 o'clock on my s4 and about 1 o'clock on the club mixer. My internal gain or whatever is at -6.9dB |
| Lin Danek 25.07.2011 | Software @ 12 o' clock. PA's @ 3/4 o' clock (Power to speakers LAST). Hardware all the way over to the left for power-up. Crank it up for sound-check. |
| Harley Zitka 25.07.2011 | If you are using an active PA system, follow these steps: Set your software gain to somewhere between -5db and -10db. Set your master output to max. Turn up the speakers just until they either clip or you hear distortion... then back them off just a bit. Then... ONLY use the master output to control volume. That way, you cannot damage anything. |
| Antonetta Wikel 25.07.2011 | That's personal question. |
<< Back to NI - Native Instruments S4/S2 Controller talkReply