Kontrol S4 problem - Master LED-Light
Kontrol S4 problem - Master LED-Light Posted on: 02.06.2011 by Lael Fruehan Hi!I've been experiencing a problem lately with my Traktor Kontrol S4. When I plug my controller, all the lights blinks one time, like it does on every start-up of the controller. But when that's done, the only thing flashing is the Master(USB?)-LED. What does this mean? I've restarted the controller, Traktor 2 and my computer. I've also checked device manager and I CAN see the controller in the USB-hub section. I've seen a couple of threads on different community s with this problem, but all in all, no solutions. So does anybody have an Idea what this could be? | |
| Lael Fruehan 09.06.2011 |
Originally Posted by IrishBlaggard
Haha, Yeah I guess... But it usually works after a couple of restarts or other forms of troubleshooting... Butwell! |
| Ming Peerman 08.06.2011 |
Originally Posted by Ch1337
|
| Charline Anding 17.08.2012 | plz help me i cant solve it all driver are up to date i have this problm how to solve it itz hardware failure or driver missing ? |
| Nakisha Pasmore 14.06.2011 | Yep. I had it set to old drivers before I updated. Neither are working. I'll try and reset everything tomorrow and hopefully something works! |
| Leeanna Ayla 13.06.2011 | Turntables work and both sides not just deck D? have you tried reverting back to the older drivers? |
| Nakisha Pasmore 13.06.2011 | I'm having the same problem. For some reason I can run my TTs through Live Input on Phono and get Master Volume Control and Meters to work, but nothing else. It lights up, then nothing. My USB and Power Cable are fine, I mean I'm getting sound from the TT out to the speakers. Really confused as I've been traveling for a bit and came back to my S4 like this after driver and software updates... BUMP! |
| Lael Fruehan 09.06.2011 |
Originally Posted by IrishBlaggard
Haha, Yeah I guess... But it usually works after a couple of restarts or other forms of troubleshooting... Butwell! |
| Mandy Lupone 09.06.2011 | Bazinga! |
| Leeanna Ayla 09.06.2011 | Glad you got it sorted. |
| Hailey Westen 09.06.2011 | JAYSUS... is it just me, or is reinstalling something people should do within moments of trouble shooting before freaking out on community s glad its sorted... we live and learn |
| Lael Fruehan 09.06.2011 | Well, Credz goes to 'photojojo'. I had to update to the latest driver. So thanks, photojojo! |
| Ming Peerman 08.06.2011 |
Originally Posted by Ch1337
|
| Lael Fruehan 05.06.2011 | Dammit... As I mentioned, my english is lame. When I say that the master-LED flashes, I mean that it stays lit. It doesn't flash, but it stays lit. Sorry for that. |
| Leeanna Ayla 05.06.2011 | while it may not be the cable that light flashes fro a specific reason so there's something along those lines that causes the problem. I believe reinstalling may be the answer, or maybe updating the driver. http://www.native-instruments.com/in...reeupdates&L=1 |
| Mandy Lupone 05.06.2011 | Im believeing if you should reinstall the whole thing, culd be a driver error. Happen to me once and all i did was a reinstall. just make sure you backup your traktor files. |
| Lael Fruehan 05.06.2011 | Ok, for the last time: It can't be the USB-cable. IF the cable was the problem, it would show an error in Device Manager, or not be connected at all. This HAS happened a couple of times earlier, but a restart of either Traktor or the controller fixed that. |
| Mandy Lupone 04.06.2011 | Tried to connect to a another computer? |
| Hailey Westen 04.06.2011 | is you cable loose on any end ??? i know sometimes USBs can tend to loosen up after a while also, as i said earlier, make sure your cable is pushed in fully into your S4, it is quite a tight fit. other than that, im stumped to what your issue may be |
| Lael Fruehan 04.06.2011 | 'bump' |
| Lael Fruehan 03.06.2011 | No hub, I've tried switching USB-ports like 20 times. No power-saving modes : ) Yes, I've tried switching cable two times. I'm 90% sure that it's not my cable and not my USB-ports. As I mentioned, this started yesterday for real. (It has happened a few times earlier, but then I just re-plugged/restarted the controller, and everything was fine.) EDIT: And yeah, I doubt it's the cable. As I mentioned in the first post I can find the controller in Device Manager, with no problems detected |
| Leeanna Ayla 03.06.2011 | Have you tried a different cable? Is it plugged into your computer or a hub? Have you tried a different port on your computer? Does the computer have some type of power save feature on the USB's? |
| Lael Fruehan 03.06.2011 | I believe I might've tried everything... :\ Still nothign though... |
| Oralia Bleyl 03.06.2011 | I also have this problem occasionally. Restarting TPS2 normally solves it but can be annoying. |
| Lael Fruehan 03.06.2011 | Thanks for your answer : ) As I mentioned, I CAN find the controller in the Device Manager, so I doubt it's faulty connected. In addition I've tried to change USB-Port several times, but still nothin' :\ And also this has started happening recently, so it has worked fine earlier. And last, please excuse my bad english ^^ Thanks! : ) |
| Hailey Westen 02.06.2011 | that normally means it aint plugged into your computer. make sure its plugged in correctly, it can be a bit stiff around the back of the s4. have you tried a different usb port and/or a different usb cable ? ps. i know ya can see the device in the usb hub section, but i dont know what else it could be other than a loose connection or inactive usb port pps. welcome to the community s. and if i aint helping ya, im sure one of the bigger boys will be along shortly to help ya out. hope ya figue it out |
<< Back to NI - Native Instruments S4/S2 Controller talkReply