VCI-400 Stand Alone Mixer Upgrade/ pfl for headphones
VCI-400 Stand Alone Mixer Upgrade/ pfl for headphones Posted on: 26.10.2012 by Pamala Hrabe Fellow music lovers...I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get | |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Gaston Milord 18.12.2013 |
Originally Posted by clkwk
|
| Pamala Hrabe 26.10.2012 | Fellow music lovers... I have followed the instructions for updating the my vci-400 to operate as a standalone mixer but when I plug in my cd player in deck C or D I do not get any sound coming through the master or headphones. I only get sound if I flip the switch on the back of the unit to rout C and D directly to master. I have update the firmware as described using the following file vci400_v20.bin; however, I have also update my windows driver to ver. 1.52.0 and firmware using (vci400_d006.bin). I have tried the stand alone mixer connected and not connected to the computer. Does it matter what order I update the firmware (i.e. vci400_d006.bin before vci400_v20.bin or vice versa)? I have tried going back and forth between firmware versions but it does not seem to make a difference. I am going to keep messing around with this after work but I believe I am missing something. I have looked through the post and I can't seem to find anyone else who is having the same problem. I am also having trouble with my headphone using traktor 2.12. Under the output routing options in traktor I only get |
| Gaston Milord 18.12.2013 |
Originally Posted by clkwk
|
| Pamala Hrabe 26.10.2012 | Figured it out: See http://community .djranking s.com/showthr...t=48844&page=2 for the solution that worked for me. Peace |
| Pamala Hrabe 26.10.2012 | Got the stand alone mixer working......any thoughts on the headphones? |
<< Back to DJ TechTools' VCI-400 FAQReply